AutoCAD Architecture :: Missing Objects In Model Space 2014?
Aug 29, 2013
We experienced a problem. we have a drawing file, is about 1.6meg not big. while working in model space doing some 3D work, all of a sudden all the objects dissapear except for some text. all layers are on and thawed. we regen all, zoom all. weird thing is when we go into the paper space tabs everything shows up. so all the data is there some place but cant find it in model space.
there are no xrefs in the drawings and i had cleaned all the multiple copies out before to keep the file size down and more workable. this is happening on two machines. other drawings are fine.
View 2 Replies
ADVERTISEMENT
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Mar 5, 2012
We have a bit of an urgent situation at work. Namely we have stepped over from standard AutoCAD 2010 to AutoCAD Architectural suit 2012.
The situation is as such that if we set our search path to our ctb and our dwt (nothing else no other search path changes) our dwt templates load as being visibly black/white all the colour information is wrong.
Upon closer inspection of elements draw in the dwt for example a line though it still displays as being physically black/ white the properties menu declares it as being the colour we need it to be for example red. We have double-checked in our plot dialogue box if the ctb is present and its presence is confirmed. The peculiarity is though if we try and locate it using our (findfile “CTB\NAME\AND\PATH” method the command prompt returns nil meaning as far as I have come to understand as missing/ not loaded/ not found. A line the properties menu states the plot style is set to ByColor and not by the specific CTB file as when the same line is selected in AutoCAD 2010.
We have quite an extensive customisation comprising almost of every kind of file AutoCAD has put up for user customisability so my instinct was that something within the whole customisation was causing our issue.
We have since rid of all customisations and reset the profile using AutoCAD and as double backup also via the registry keys, we also have deleted our corresponding AutoCAD application folder in the hope of eliminating some nasty that may of stayed behind.
We have no plug-ins that cannot be the problem. Further experimentation shows that if we create a search path using the following lisp the colours are displayed right for the duration of the AutoCAD session but upon restarting AutoCAD the colours again become black/ and white.
When entities such as the lines are moved the items being moved flicker across the screen in their correct colour, once placed the image instantly shows as being black/ white again.
As final symptom our model space colour seems to be the only thing effected, our layout tabs are fine however we don’t work in layouts but rather in model space.
I have also as last used the vars2src command in AutoCAD 2010 and imported the variable settings into AutoCAD architectural suit 2012 hoping that the issue was a variable setting overlooked, to no avail though. Neither is our desktop icon enabled with any switches such as profiles.
View 1 Replies
View Related
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
Feb 27, 2012
Somehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
View 4 Replies
View Related
Apr 4, 2012
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies
View Related
Oct 4, 2013
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies
View Related
Jun 5, 2013
I'm a current user of Inventor Professional 2013 and am in the process of migrating over to 2014, I've got almost everything sorted and am really liking some of the new features.
However, I have a major problem which is preventing me from using the new software full time. Have asked around and done several google searches but no one can provide an answer.
Basically, I send a lot of my drawings out for Lazer cutting, and they require a model space dwg file for there laser cutting machine, when I right click and select "Insert In Model Space" like I always did in 2013, and 2012 and all previous versions it worked fine and then can see the profile in model space tab. In 2014 however I get the error message "Invalid input for request". And nothing happens.
View 7 Replies
View Related
Jul 8, 2013
insert dwg view in model space with Inv 2014.
I try here and i receive this error " invalid input for request" If i try with 2013 it's work well.
INV PRO 2014
MS Office 2007
Win 7 pro, core i7 950, asus P6T WS
nvidia Gforce GTX 295
WD caviar black 500Go
WD caviar black 1To
View 4 Replies
View Related
May 17, 2013
I have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
View 9 Replies
View Related
Nov 23, 2011
I have some code in a VBA program I'm trying to convert to .net that loops through all the entities in model space as in the code snip below. What I can't figure out is how to get the total number of objects in model space at the start so I can use this info to advance a progress bar. ie the equivilent of VBA's "ThisDrawing.ModelSpace.Count"
Dim bt As BlockTable = tr.GetObject(DB.BlockTableId(), OpenMode.ForRead)
Dim btr As BlockTableRecord = tr.GetObject(bt(BlockTableRecord.ModelSpace),
OpenMode.ForRead)
' Loop for each entity in the modelspace
For Each entId As ObjectId In btr
'<code sniped>
'advance progress bar
Next
View 3 Replies
View Related
May 24, 2012
I would like to scale all objects by x2 in Model Space using reference point xyz=0. Just like one would do via scale command. However, I would like to do so programmatically in VB.NET
View 2 Replies
View Related
Jul 19, 2013
I worked all day yesterday on a drawing and late afternoon all the objects in model space disappeared except for an OLE object (jpg photo). Objects in the two paper spaces are left unchanged. I don't remember what command I was using at the time. There was another OLE jpg that disappeared in model space. It appears that all layers are on. The file is fairly large - 12 MB and even though the objects disappeared, the size has remained the same so I'm hoping that they are still there somewhere. Zoom All and Regen doesn't work.
I use Autocad LT 2013 and Windows 7. The file is too large to attach.
View 9 Replies
View Related
Mar 22, 2013
I'm using ACA 2013.
While in a view I make a "New Model Space View". After I tag this MSV it seems that being able to see the border of each MSV that is in my view dwg would be a useful thing. Is there anyway to turn this boundary on?
View 5 Replies
View Related
Dec 4, 2013
I have two objects that I would like to link together in model space. I realize this is easy to do using paper space but I am curious if this can be done in model space.
The two objects are wire connections but they are spaced far apart in my drawing and can be a pain trying to find thier locations all the time. if I could select or click the first connector and be able to pan or zoom to the appropriate connection by link or other means.
View 4 Replies
View Related
Sep 11, 2012
I have always been able to highlight separate objects in model space, and now i can only do one at at time??? I click on the second object, and the first one stops being highlighted.
I don't know if somehow i changed a setting on accident, but i don't know how to get it back to be able to do multiple separately.
View 3 Replies
View Related
Jan 7, 2014
In a 2D drawing I want to arrange model space objects in a pviewport such that a specific model space point is in the center of the pviewport. I'm manipulating the pviewport properties to try to accomplish this. To have the view perpendicular to the model space XY plane, I've set the pviewport direction property at 0,0,1 and am varying the arrangement of model space objects with the pviewport target property.
When doing this by hand, I use the DVIEW command and the POints option to set the camera and target. The model space point I want in the center of the pviewport is 16.25,11.5,0. In the DVIEW command, POints option, I set target to 16.25,11.5,0 and camera to 16.25,11.5,1.
When attempting to do this with a macro I'm not finding any obvious correlation between the pviewport target property setting and the location of the desired model space point. Below are the lines to set the target property in a pviewport called PVPort created in previous steps. When I set the target property to 0,0,0, the model space point 45.3541, 17, 0 is in the center of the pviewport. When I set the target property to 16.25,11.5,0, the model space point 61.6041,28.5,0 is in the center of the pviewport.
If the pviewport has a twist angle of a scale not 1.0 (and therfore a different model space point I'm wanting in the center of the pviewport), it gets more confusing.
Dim VPP(0 to 2) as Double
VPP(0) = 0: VPP(1) = 0: VPP(2) = 0
PVPort.Target = VPP
View 1 Replies
View Related
May 24, 2011
I have a multiple blocks in my drawing and I would like to select certain obejects within these block from model space, i.e all lines = White, and then return their their combined length.
At the moment I have to explode all of the blocks, use qselect, run length.lsp to get the combined length of the selection and then undo the actions previous to the block explosion.
View 3 Replies
View Related
Apr 8, 2013
I'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
View 1 Replies
View Related
Jul 9, 2012
We have had a reoccuring problem in autocad architecture 2012 where model space views can no longer be dragged into a sheet. It just shows a circular cancel icon.
The sheets are set up fine and it may even have several MSVs already in place then out of no where the ability is lost. We have tried allt he usual fixes (checked the layers, restored the .bak file, tried on other computers, installed service packs) but it seems once the file is "poisoned" the only fix is to recreate the sheet and delete the old one. Not a terrible solution but it is not efficient.
We have a dozen computers all with acad architecture 2012 and it seems to happen on random computers and we can't pinpoint any specific differences between them.
We did not have this problem with Autocad architecture 2009.
It could be something with the project database.
View 2 Replies
View Related
Jul 1, 2010
Trying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
View 6 Replies
View Related
Oct 27, 2011
We're testing some new machines running Windows 7 64-bit with both AutoCAD Architecture 2011 and 2012 64-bit installed.
When dragging and dropping a model space view onto a sheet, instead of the folder with paperclip symbol, we're getting a circle with a line through it prohibited symbol. This only occurs when our project files are on our network. When we use them on a local machine this does not occur.
We cannot drag and drop onto new sheets either.
[URL]
We are running on a Novell Linux Open Enterprise Server network. We previously had a problem with not being able to open any sheets if another drawing was open, which we resolved by disabling Novell File Caching. We are also now experiencing unhandled e06d7363h exception errors with any type of file access in the Project Navigator. This crashing also does not occur when the files are on the local machine.
View 5 Replies
View Related
Mar 20, 2012
When i used to draw a rectangle, circle, line, etc- a box (or several) boxes popped up after i clicked the first point. These let me enter the distance then hit the tab button and go to a second box to enter height or angle depending on what i was drawing. There was also some popups that showed up when clicking the chamfer or fillet buttons but now those are all gone. When i input numbers, it goes to the command bar.
How can i get those small popup windows to reappear in my modelspace?
View 3 Replies
View Related
Dec 13, 2012
We are trying to create a set of palettes for a building type that we specialize in. How do we add the spaces to a design palette and can we include a room tag with it?
View 1 Replies
View Related
Jan 23, 2013
How do i rotate objects, plans...etc on model space in a view port.
View 9 Replies
View Related
Feb 14, 2013
Is there a quick way to simultaneously delete all objects in a layer if these objects are found across several layout tabs and model space?
At the moment, I'm getting the objects using: (setq a (ssget "X" '((8 . "Revision"))))
This finds all objects in the drawing, but if I just use: (command "_.erase" a "")
to delete them, only the the objects in the current layout or space are getting deleted...
View 2 Replies
View Related
Sep 2, 2011
My company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
View 5 Replies
View Related
Aug 13, 2008
my OS is Vista 64bit. i was using ACA2008 SP1 without any problems about a year.i decided to uninstall it and start using ACA2009.i have uninstalled ACA2008, 3dsmax2008 and other autodesk apps and removed some folders 'autodesk' and 'autodesk shared' from vista system folders.i also delete 'autodesk' from registry (LocalMachine/Software & CurrentUser/Software).then i installed ACA2009 64bit without any problems. after install i start it and there wasn't any problems (but i do not use any AEC objects, so i don't know if they was working).next i installed 3dsmax2009 & sp1 for it. max worked OK.then i installed sp1 for ACA2009. instalation was OK... but when i start working on a project i realised that AEC objects (wall,door, etc.) dont work at all ACA2009 starts OK without any warning or something...it loads at startup AECarchBase (and other AEC related stuff) but when you are trying to use any of wall,door,window it does do nothing... for example when you select wall from tools pallete it shows command 'WallAdd' in command line and then wall command ends without any warning or something...it also doesn't work from command line or menu the strange thing is when i uninstall ACA2009 and install ACA2008 again problem was also now in ACA2008 !!!
View 9 Replies
View Related
Apr 26, 2013
I used architecture on my pc. I installed Autocad on another pc with the same Serial code. I can see on the top that my version suddenly is a Educational version. I'm telling you this because i don't know if this is the reason of my problem.
The problem: i can't see the properties of an object when i use autocad architecture in the educational version.
For example: I make a wall and i place a window in the wall. Now i want to change the width of my window, using the properties bar. SO i click on my window (right mouse button) and click on PROPERTIES. It opens the properties bar BUT i can't see the window and his properties. At the top of the properties bar it says "No selection".. How can this be when i begin with the right mouse click on my window?
When i do it in the other direction: Open properties (ctrl+1) first and then select for example my wall, still nothing changes in the properties bar!
View 4 Replies
View Related
Nov 29, 2012
I thought there is command that will crop a window area in model space to minimize the amount of objects.
View 4 Replies
View Related
Feb 25, 2013
Without opening the drawing...
How can I iterate through and check the object type of all objects in model space? And... then delete them if they are certain types... like lines, circles, polylines, text, mtext, etc?
View 2 Replies
View Related
