AutoCad 2D :: Missing Properties Of Objects In Architecture
Apr 26, 2013
I used architecture on my pc. I installed Autocad on another pc with the same Serial code. I can see on the top that my version suddenly is a Educational version. I'm telling you this because i don't know if this is the reason of my problem.
The problem: i can't see the properties of an object when i use autocad architecture in the educational version.
For example: I make a wall and i place a window in the wall. Now i want to change the width of my window, using the properties bar. SO i click on my window (right mouse button) and click on PROPERTIES. It opens the properties bar BUT i can't see the window and his properties. At the top of the properties bar it says "No selection".. How can this be when i begin with the right mouse click on my window?
When i do it in the other direction: Open properties (ctrl+1) first and then select for example my wall, still nothing changes in the properties bar!
View 4 Replies
ADVERTISEMENT
Jan 16, 2012
A user showed me today that she cannot see any properties for a wall, door, or other AEC object in the Properties palette.
Some options like height, width, etc. are shown, but not layer, style, etc. from the General portion of the Basic tab.
Is this going to be a reinstall scenario or is there a fix for this?
View 9 Replies
View Related
Aug 22, 2013
How can I restore my object properties dialog box in its default state? I'm recently working on a project when my Autocad Architecture 2013 just stopped working while it was saving. When i re-opened the file, I just noticed that the object properties doesn't show the full parameters of a certain object anymore. The width,height and other parameters in adding a wall is not included in the properties dialog box. Same scenario goes for all the objects, when i click on a dimension line or any line, an incomplete dialog box appears. Solutions that i've tried but nothing worked:
1. Changed User Profle Preferences
2. Changed my .CUIX in the customization file
3. Restart Autocad
4. Reset Autocad
5. Reinstalled Autocad
6. Downloaded and Installed Autocad Architecture 2013 service packs 1&2
I'm Using Autocad Architecture 2013 64 bit and OS windows 8 64 bit.
View 3 Replies
View Related
Sep 24, 2013
My company have decided to use plain autocad as the base instead of Civil3D. Since this been done im missing information in the properties pallet.
The information im interested is shown in attachment properties 1 (This is from Civil3d). In the properties pallet in plain autocad this information is missing se attachment Properties 2 (From plain autocad).
Is there any way to reach this information in plain autocad. This is in autocad 2014.
View 3 Replies
View Related
Feb 15, 2011
Walls are being created on layer A-Wall, in color Cyan, Lineweight .020, etc. I'd like to edit those layer properties. There must be a matrix somewhere that shows a list of all of the Architectural Objects, the layer that each object will be created on, and the properties of those layers. Where in ACA2008 have they hidden this top-secret matrix? I've accessed Layer Key Styles via about 6 different routes, and nowhere do I find a list of Objects. I see that I could define an override for every component of a Wall object in the Style Manager / Display Properties, but it sure would be easier to just change the layer color once, wherever that's defined. There is only one Layer Key Style accessible through Style Manager, and layer A-Wall doesn't appear in that manager- layers A-Wall-Abov, A-Wall-Blow, etc appear, but not A-Wall. Neither does layer A-Glaz, which is where Window objects are placed.
How does a Wall object know to place itself on layer A-Wall, and where are the properties of layer A-Wall defined?
View 5 Replies
View Related
Aug 13, 2008
my OS is Vista 64bit. i was using ACA2008 SP1 without any problems about a year.i decided to uninstall it and start using ACA2009.i have uninstalled ACA2008, 3dsmax2008 and other autodesk apps and removed some folders 'autodesk' and 'autodesk shared' from vista system folders.i also delete 'autodesk' from registry (LocalMachine/Software & CurrentUser/Software).then i installed ACA2009 64bit without any problems. after install i start it and there wasn't any problems (but i do not use any AEC objects, so i don't know if they was working).next i installed 3dsmax2009 & sp1 for it. max worked OK.then i installed sp1 for ACA2009. instalation was OK... but when i start working on a project i realised that AEC objects (wall,door, etc.) dont work at all ACA2009 starts OK without any warning or something...it loads at startup AECarchBase (and other AEC related stuff) but when you are trying to use any of wall,door,window it does do nothing... for example when you select wall from tools pallete it shows command 'WallAdd' in command line and then wall command ends without any warning or something...it also doesn't work from command line or menu the strange thing is when i uninstall ACA2009 and install ACA2008 again problem was also now in ACA2008 !!!
View 9 Replies
View Related
Aug 29, 2013
We experienced a problem. we have a drawing file, is about 1.6meg not big. while working in model space doing some 3D work, all of a sudden all the objects dissapear except for some text. all layers are on and thawed. we regen all, zoom all. weird thing is when we go into the paper space tabs everything shows up. so all the data is there some place but cant find it in model space.
there are no xrefs in the drawings and i had cleaned all the multiple copies out before to keep the file size down and more workable. this is happening on two machines. other drawings are fine.
View 2 Replies
View Related
Feb 13, 2013
Somehow the Properties Palette has gotten less wide- such that I can't read teh actual properties. Previously I was able to make it wider just by hovering over it, clicking on an arrow and dragging it wider. Not now.
View 1 Replies
View Related
Aug 13, 2013
It's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
View 2 Replies
View Related
Jul 10, 2012
When I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
View 3 Replies
View Related
Sep 5, 2012
Juts had Acad LT 2009 re-installed on my new laptop, and all of my old settings, desktop preference etc have been wiped. No problem, couple of hours to set it back up.
BUT
When right-clicking on any object to bring up the properties, (line length, text height etc) the properties do not appear in the drop down box on the right, or in any 'quick properties' display
View 9 Replies
View Related
Jun 29, 2011
AutoCAD Architecture 2009 - Something new started today!!! Working in either design or construction workspace the Properties tool bar will not operate. When I select an object and roll over to the Properties Pallette it simply starts to blink and does not open. Also, the Quick Properties panel will not open. Background, the new file I am working on was last saved on my laptop and transfered via a thumb drive. I have done this often with out a problem. However, the laptop is a new one with Windows 7 and my desktop has Windows XP.
View 1 Replies
View Related
Feb 19, 2011
I am working on a template for a project type (Residential). I have created all of my drawings, views, sheets, etc. I have a View drawing set up for a site plan - where I include some m-text regarding the survey and site plan information. I want to create fields that reference the Surveyor's Name, the Survey Date and the Project Address.
I tried creating custom properties in the project, but it appears that fields that reference the project properties only update on the sheet views in paper space. Is there a way of creating drawing specific fields in model space where I can input some data and them extract it in a field in model space that is quick and easy (as opposed to creating some type of MVB)?
View 1 Replies
View Related
Jan 10, 2011
I've finally made the jump from ACA2008 to ACA2011..I'm slowly getting used to the Ribbon, but there's something from 2008 I dearly miss: the Properties Toolbar . Now, I may just be missing something in 2011, so I thought I'd post to find out...
With the Prop Toolbar I could select anything on screen (whether an entity, object, text, dimension, whatever...) and just look up at that toolbar to know what color & linetype that selection was. I strategically placed this toolbar above the Layer Properties Toolbar so I could add layer identification to said selections.... Well with 2011, if I select something, I have to make sure to click on the Home Tab to see the Layers Ribbon. If I want to see the properties, I have to open up the properties window. Plus, the window needs to be pulled out wide enough for me so see the linetypes. It's adding steps that I don't need. Is there a way to add the properties dialog box to the ribbon above or something?
View 6 Replies
View Related
Dec 16, 2011
When selecting an AEC and going to the properties dialogue box I no longer have items showing up in the prpoerties like cleanup group, size, or endpoint type. It only has the general tab and 3d visualization. I did a repair from the uninstall software fromn control panel. I also rebooted. I don't want to do a reinstall becuase of customizations. I have vista Ultimate operating system.
View 2 Replies
View Related
Jan 7, 2013
When I first time use AutoCAD 2013, my Properties toolbar can be displayed by right-clicking at the pull-down menu at click on the properties. But now I could not find the properties option anymore after right-clicking at the pull-down menu. get back my properties toolbar displayed in my AutoCAD 2013.
View 6 Replies
View Related
Nov 7, 2011
I'm having a problem with my properties window or floating palette. When I select an object, such as a "line", my properties palette refreshes itself for about 3 seconds. When I hit esc, or deselect the line, it takes another 3 seconds to refresh itself. You can even see the properties palette start at the top and go blank as it travels downward. Very slow process, I can not get anything done. IF I close my properties palette, it does not have the delay, but I can not work without it. When I reboot, it works fine for about 5-6 selections, then jams back up.
ACA 2012 sp1 with Win 7 Pro 64bit sp1
Intel i7 hex 3.0
16 gb ram
Nvidia Quadro 4000
View 9 Replies
View Related
May 25, 2007
it sure is useful to be able to get to the rest of the object properties that are there but hidden from property sets.
May 18, 2007
ADT Window Style Type in a PSD
Filed under: visitmycarfeed, drivemy cars, minicartag, internet — wilhemina947judith @ 5:38 pm
The Window Type for a windows style is not available as an automatic property. So a bit of VBScript is needed. Create a PSD (Property Set Definition) that applies to Windows styles and add the automatic property Handle. Then add the formula below. Notice that [Handle] in the formula must be selected from the “Insert Property Definitions” list. In the code
AecX.AecArchBaseApplication.5.0 refers to ADT 2007. For other versions of ADT change it. ADT 2004 - AecX.AecArchBaseApplication.4
ADT 2005 - AecX.AecArchBaseApplication.4.5
ADT 2006 - AecX.AecArchBaseApplication.4.7
ADT 2007
- AecX.AecArchBaseApplication.5.0
ACA 2008 - AecX.AecArchBaseApplication.5.5
[code]....
I have already wrote the code to get the elevations of ceilng grid objects, diffusers and lights in autocad MEP 2008. Now to get this to work for basic hatch objects that we like to use for gyp ceilings...
View 1 Replies
View Related
Dec 21, 2011
We've just upgraded to AutoCAD Architecture 2012 and I discovered that my match properties command (MA) is now on steroids. In the process of making an existing plan into a demo plan, I put a toilet on a demo layer. I intended to use match properties to put other select items on the same demo layer, but when I touched the lavatory, it turned into a toilet. I've never had this happen before. In trying to solve the issue, I've discovered the same thing happens with other AEC objects (couches, urnials, chairs -- all became toilets) and it happens in multiple files. Only walls and doors remain intact with only the layer, color and linetype changing (which is what I was expecting).
I looked at the settings inside the match properties command and none of them seemed to apply. I deselected the special properties options anyway, but the problem remains.
View 4 Replies
View Related
Oct 27, 2010
i got one problem with properties palette. that is when i select line in the drawing, it display no selection in the properties palette. but display other objects except lines.
View 5 Replies
View Related
Nov 18, 2013
I am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.
View 3 Replies
View Related
Apr 20, 2012
I like to have all my palettes docked, however, the Properties Palette won't stay docked after closing and reopening AutoCAD. Every time I open AutoCAD, the Properties Palette reverts to its undocked status (all other docked palettes stay put). Is there any way to remedy this? It's a pain to have to redock it every time I open the program.
View 3 Replies
View Related
Jun 21, 2010
When I click on Layer Properties Manager, I do not get the layers palette. The same goes for typing layerpalette in command.
View 6 Replies
View Related
Feb 16, 2012
I have two problems. I want to change the text size, font, and color to be consistent with my office standards. However I can not find where the Sheet List Style is stored or edited. Which brings me to the second issue, the HELP in Exchange is bogus. Like MANY of the help entries, it refers to incorrectly named or non existent features and commands. In this case it says to "Select the sheet list in the drawing, right-click, and click Edit Sheet List Table Settings." which would be fine, except there is no option in the right click menu named "Edit Sheet List Table Settings".
Clicking on the Manage tab on the ribbon and selecting style Manager, the selecting Documentation objects, then schedule table styles, yeilds...nothing. How can I edit something that has no options?
Hiding the style manager so that all you get when you click on help is a ding that tells you there is a command open, but does not bring the command window to the fore.
View 2 Replies
View Related
Aug 25, 2011
How can I get the drop down menu of previously input data to come back? I was here on a previous computer so I assume its something in the part catalog or part builder?
Currently operating Autodesk Civil 3D 2012, AutoCAD 2012, Bentley MicroStation V8i
View 9 Replies
View Related
Apr 26, 2012
I use the Map function within Civil 3D 2012 to export municipal GIS data from shp files, for our base plans. One of the clean-up functions is to convert the text exported from GIS to an appropriate text style suitable for the project. To do this, I would select the text, use the select similar command, then update the text style in the properties window. This process has worked well when using Civil 3D 2010 and 2011, however, I have noticed in 2012 the "style" option is not available.
Not sure what I mean, have a look at the two attachments. Notice in the C3D 2012 image, there is no "style" option, while the C3D 2010 image includes the 'style" option. I submitted this bug to our reseller, who was able to replicate this error. Our reseller submitted this to Autodesk, who was also able to replicate this error. What is interesting is if I open the drawing that contains the map exported data from C3D 2012 in either 2010 or 2011 versions, the "style" option is available, just not in 2012. This leads me to believe the issue is not with the data or the export functionality of 2012, the issue is with 2012 displaying the data property. Autodesk has forwarded this issue to their developers, no indication of when or if it will be resolved for Civil 3D 2012.
My workaround for now is to use Civil 3D 2010 for the drawing cleanup functions. Fortunately I am able to have previous versions of Civil 3D installed, since I am on subscription. My advice is when upgrading, do not remove your previous versions if you are on subscription, you may need to use it one day.
View 6 Replies
View Related
Aug 13, 2013
Is there any (non programming) solution where I can add custom data/properties to objects in plain AutoCAD?
(I know I can in Civil 3D though, using Notes/Extended Properties etc etc)
We want to allow users to add their own unique ID to all their drawn objects, and we don't want to use Entity Handle as that is not anything we can choose ;-)
We're using that ID to connect other datasources (ODBC) to Navisworks and we would like it to work even from AutoCAD, even though we have Civil 3D inhouse.
using plain AutoCAD straight out of the box?
View 9 Replies
View Related
Jul 11, 2012
From time to time the layer properties manger Blanks out. See the attached image. The data is there, under the "fog" - I can view one item at a time by clicking on it.
CLASSICLAYER works in most situations, but it isn't a real fix. If I play with the layer manager long enough I get some degree of rehabilitation - as if it is really trying hard to open, but just can't manage it. The fields sometimes are blocked black, or certain areas of the fields become visible momentarily. If I scroll to the far right I can pick up some information.
I'd just like it to work properly.
I am running AutoCad Architecture 2012 on Windows 7 professional with NVIDIAGeForce GT 440 and dual screens, (however I keep all the autocad work on the same screen).
View 4 Replies
View Related
Oct 3, 2013
Is there a way to have check boxes in the Project Properties to be able to turn on and off txt / stamps / etc. for all sheets in a project? I am looking for something that is similarly down in Revit Title Blocks?
View 6 Replies
View Related
Jan 26, 2012
How do you make both the Plan and Plan Low Detail both show in bold as being current in the display properties of a structural member?
View 3 Replies
View Related
Jan 16, 2013
Typically when I click on the Set Origin button, all I then have to do is click on the page where I want the hatch origin to be, and everything works just fine.
I work on a shared computer. Start working this morning, and now when I click on the Set Origin button, it prompts me to inform it "SIngle or SUbobject?". And through a number of further selections, I can eventually get around to selecting my origin and having things shift around properly. But that really slows me up. Seems like one of the system variables got changed. I've doodled around a bit online, but haven't been able to find how to get things back to how they used to be.
And I tried opening a new page, restarting the program, etc., and the new way the button works has taken hold. I can't get it to reset. So on my computer (not working properly) when you click on the Set Origin button, the command line says "Command: _-hatchedit select hatch objects..select hatch objects: _S" then it says "ambiguous response, please clarify" "SIngle or SUbobject?"
On the computers that are working properly it only displays the "select hatch objects: _O" and doesn't show the _S part.
View 2 Replies
View Related
