AutoCAD Architecture :: Object Properties Missing Some Parameters
Aug 22, 2013
How can I restore my object properties dialog box in its default state? I'm recently working on a project when my Autocad Architecture 2013 just stopped working while it was saving. When i re-opened the file, I just noticed that the object properties doesn't show the full parameters of a certain object anymore. The width,height and other parameters in adding a wall is not included in the properties dialog box. Same scenario goes for all the objects, when i click on a dimension line or any line, an incomplete dialog box appears. Solutions that i've tried but nothing worked:
1. Changed User Profle Preferences
2. Changed my .CUIX in the customization file
3. Restart Autocad
4. Reset Autocad
5. Reinstalled Autocad
6. Downloaded and Installed Autocad Architecture 2013 service packs 1&2
I'm Using Autocad Architecture 2013 64 bit and OS windows 8 64 bit.
I used architecture on my pc. I installed Autocad on another pc with the same Serial code. I can see on the top that my version suddenly is a Educational version. I'm telling you this because i don't know if this is the reason of my problem.
The problem: i can't see the properties of an object when i use autocad architecture in the educational version.
For example: I make a wall and i place a window in the wall. Now i want to change the width of my window, using the properties bar. SO i click on my window (right mouse button) and click on PROPERTIES. It opens the properties bar BUT i can't see the window and his properties. At the top of the properties bar it says "No selection".. How can this be when i begin with the right mouse click on my window?
When i do it in the other direction: Open properties (ctrl+1) first and then select for example my wall, still nothing changes in the properties bar!
Juts had Acad LT 2009 re-installed on my new laptop, and all of my old settings, desktop preference etc have been wiped. No problem, couple of hours to set it back up.
BUT
When right-clicking on any object to bring up the properties, (line length, text height etc) the properties do not appear in the drop down box on the right, or in any 'quick properties' display
Occassionally the object properties in my object manager will dissappear and I am unable to bring them back. I have tried toggling all the buttons on the manager, restarting corel, resetting corel to it's default settings and restarting my computer but nothing will bring back the properties. It does not happen on every single file but it happens often enough to be a pain. I have attached a picture of what the object manager looks like.
I am working on a template for a project type (Residential). I have created all of my drawings, views, sheets, etc. I have a View drawing set up for a site plan - where I include some m-text regarding the survey and site plan information. I want to create fields that reference the Surveyor's Name, the Survey Date and the Project Address.
I tried creating custom properties in the project, but it appears that fields that reference the project properties only update on the sheet views in paper space. Is there a way of creating drawing specific fields in model space where I can input some data and them extract it in a field in model space that is quick and easy (as opposed to creating some type of MVB)?
When selecting an AEC and going to the properties dialogue box I no longer have items showing up in the prpoerties like cleanup group, size, or endpoint type. It only has the general tab and 3d visualization. I did a repair from the uninstall software fromn control panel. I also rebooted. I don't want to do a reinstall becuase of customizations. I have vista Ultimate operating system.
it sure is useful to be able to get to the rest of the object properties that are there but hidden from property sets.
May 18, 2007 ADT Window Style Type in a PSD Filed under: visitmycarfeed, drivemy cars, minicartag, internet — wilhemina947judith @ 5:38 pm
The Window Type for a windows style is not available as an automatic property. So a bit of VBScript is needed. Create a PSD (Property Set Definition) that applies to Windows styles and add the automatic property Handle. Then add the formula below. Notice that [Handle] in the formula must be selected from the “Insert Property Definitions” list. In the code
AecX.AecArchBaseApplication.5.0 refers to ADT 2007. For other versions of ADT change it. ADT 2004 - AecX.AecArchBaseApplication.4 ADT 2005 - AecX.AecArchBaseApplication.4.5 ADT 2006 - AecX.AecArchBaseApplication.4.7 ADT 2007 - AecX.AecArchBaseApplication.5.0 ACA 2008 - AecX.AecArchBaseApplication.5.5
[code]....
I have already wrote the code to get the elevations of ceilng grid objects, diffusers and lights in autocad MEP 2008. Now to get this to work for basic hatch objects that we like to use for gyp ceilings...
Having just installed AutoCadArchitecture 2013 last week, I've been fairly successful in fixing most of my "issues".
When I dbl. click on a line, polyline, etc, I have it set up to open the Properties Pallet, (not the quick properties box). Problem is, the first time I dbl.click on a no object it opens the Properties pallet no problem, but the second time i dbl click an object, the properties pallet completely disappears from the screen. When I dbl click the object a 3rd time, the pallet comes back. I have it set to auto-hide, but not disappear. How do I get to use the dbl. click feature to open the properties pallet every time?
Just starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
Somehow the Properties Palette has gotten less wide- such that I can't read teh actual properties. Previously I was able to make it wider just by hovering over it, clicking on an arrow and dragging it wider. Not now.
It's not just the layer that isn't being displayed in the Properties Palette. My 2014 Properties Palette isn't contextual--displays only the general info--none of the object specific information.
I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
I am trying to add LEED parameters to a floor type in the Type Properties. That can be seen when I create a schedule? I am unsure if this is possible but it is something we would like to incorporate in our models.
I am just having some difficulties using the standard UKIE subassemblies where the carriageway is not showing the parameters correct. See the drawing attached. Eg:
1) The properties does not show the side correctly it has a zero value (not much of a issue as i can use the mirror command) (drawing subassembly)
2) I am unable to choose any superelevation on the subassembly . Now this is what causing me problems.
I have already re-installed the software from scratch and have also downladed the latest service pack.
In the recent past I've been putting textboxes (General Notes) on drawings, and using part-parameters in these textboxes to display the values stored in these parameters (see attached picture). Is there a way to automatically put a link to these parameters into the notes through the API / VBA so that these values update when the part changes? With the property obj_GeneralNote.Text it's only possible to add plain text.
Product Design Suite 2014 Inventor 2014, Vault 2014 HP Workstation Z220 Intel Xeon 3.4GHz 16GB RAM Nvidia Quadro 4000 Windows 7 Professional (64bit)
AutoCAD Architecture 2009 - Something new started today!!! Working in either design or construction workspace the Properties tool bar will not operate. When I select an object and roll over to the Properties Pallette it simply starts to blink and does not open. Also, the Quick Properties panel will not open. Background, the new file I am working on was last saved on my laptop and transfered via a thumb drive. I have done this often with out a problem. However, the laptop is a new one with Windows 7 and my desktop has Windows XP.
I've finally made the jump from ACA2008 to ACA2011..I'm slowly getting used to the Ribbon, but there's something from 2008 I dearly miss: the Properties Toolbar . Now, I may just be missing something in 2011, so I thought I'd post to find out...
With the Prop Toolbar I could select anything on screen (whether an entity, object, text, dimension, whatever...) and just look up at that toolbar to know what color & linetype that selection was. I strategically placed this toolbar above the Layer Properties Toolbar so I could add layer identification to said selections.... Well with 2011, if I select something, I have to make sure to click on the Home Tab to see the Layers Ribbon. If I want to see the properties, I have to open up the properties window. Plus, the window needs to be pulled out wide enough for me so see the linetypes. It's adding steps that I don't need. Is there a way to add the properties dialog box to the ribbon above or something?
When I first time use AutoCAD 2013, my Properties toolbar can be displayed by right-clicking at the pull-down menu at click on the properties. But now I could not find the properties option anymore after right-clicking at the pull-down menu. get back my properties toolbar displayed in my AutoCAD 2013.
My company have decided to use plain autocad as the base instead of Civil3D. Since this been done im missing information in the properties pallet.
The information im interested is shown in attachment properties 1 (This is from Civil3d). In the properties pallet in plain autocad this information is missing se attachment Properties 2 (From plain autocad).
Is there any way to reach this information in plain autocad. This is in autocad 2014.
I'm having a problem with my properties window or floating palette. When I select an object, such as a "line", my properties palette refreshes itself for about 3 seconds. When I hit esc, or deselect the line, it takes another 3 seconds to refresh itself. You can even see the properties palette start at the top and go blank as it travels downward. Very slow process, I can not get anything done. IF I close my properties palette, it does not have the delay, but I can not work without it. When I reboot, it works fine for about 5-6 selections, then jams back up.
ACA 2012 sp1 with Win 7 Pro 64bit sp1 Intel i7 hex 3.0 16 gb ram Nvidia Quadro 4000
We've just upgraded to AutoCAD Architecture 2012 and I discovered that my match properties command (MA) is now on steroids. In the process of making an existing plan into a demo plan, I put a toilet on a demo layer. I intended to use match properties to put other select items on the same demo layer, but when I touched the lavatory, it turned into a toilet. I've never had this happen before. In trying to solve the issue, I've discovered the same thing happens with other AEC objects (couches, urnials, chairs -- all became toilets) and it happens in multiple files. Only walls and doors remain intact with only the layer, color and linetype changing (which is what I was expecting).
I looked at the settings inside the match properties command and none of them seemed to apply. I deselected the special properties options anyway, but the problem remains.
i got one problem with properties palette. that is when i select line in the drawing, it display no selection in the properties palette. but display other objects except lines.
I like to have all my palettes docked, however, the Properties Palette won't stay docked after closing and reopening AutoCAD. Every time I open AutoCAD, the Properties Palette reverts to its undocked status (all other docked palettes stay put). Is there any way to remedy this? It's a pain to have to redock it every time I open the program.
I have two problems. I want to change the text size, font, and color to be consistent with my office standards. However I can not find where the Sheet List Style is stored or edited. Which brings me to the second issue, the HELP in Exchange is bogus. Like MANY of the help entries, it refers to incorrectly named or non existent features and commands. In this case it says to "Select the sheet list in the drawing, right-click, and click Edit Sheet List Table Settings." which would be fine, except there is no option in the right click menu named "Edit Sheet List Table Settings".
Clicking on the Manage tab on the ribbon and selecting style Manager, the selecting Documentation objects, then schedule table styles, yeilds...nothing. How can I edit something that has no options?
Hiding the style manager so that all you get when you click on help is a ding that tells you there is a command open, but does not bring the command window to the fore.
How can I get the drop down menu of previously input data to come back? I was here on a previous computer so I assume its something in the part catalog or part builder?
Currently operating Autodesk Civil 3D 2012, AutoCAD 2012, Bentley MicroStation V8i
I use the Map function within Civil 3D 2012 to export municipal GIS data from shp files, for our base plans. One of the clean-up functions is to convert the text exported from GIS to an appropriate text style suitable for the project. To do this, I would select the text, use the select similar command, then update the text style in the properties window. This process has worked well when using Civil 3D 2010 and 2011, however, I have noticed in 2012 the "style" option is not available.
Not sure what I mean, have a look at the two attachments. Notice in the C3D 2012 image, there is no "style" option, while the C3D 2010 image includes the 'style" option. I submitted this bug to our reseller, who was able to replicate this error. Our reseller submitted this to Autodesk, who was also able to replicate this error. What is interesting is if I open the drawing that contains the map exported data from C3D 2012 in either 2010 or 2011 versions, the "style" option is available, just not in 2012. This leads me to believe the issue is not with the data or the export functionality of 2012, the issue is with 2012 displaying the data property. Autodesk has forwarded this issue to their developers, no indication of when or if it will be resolved for Civil 3D 2012.
My workaround for now is to use Civil 3D 2010 for the drawing cleanup functions. Fortunately I am able to have previous versions of Civil 3D installed, since I am on subscription. My advice is when upgrading, do not remove your previous versions if you are on subscription, you may need to use it one day.
