When I first time use AutoCAD 2013, my Properties toolbar can be displayed by right-clicking at the pull-down menu at click on the properties. But now I could not find the properties option anymore after right-clicking at the pull-down menu. get back my properties toolbar displayed in my AutoCAD 2013.
View 6 Replieswhen i start with the dynamic simulation i found out that there isnt any option of revolute or prismatic or anyother standard joints.. just hv spacial joints under that session... have did almost all the updates and no use.. still remains the same...
View 1 Replies View RelatedMy company have decided to use plain autocad as the base instead of Civil3D. Since this been done im missing information in the properties pallet.
The information im interested is shown in attachment properties 1 (This is from Civil3d). In the properties pallet in plain autocad this information is missing se attachment Properties 2 (From plain autocad).
Is there any way to reach this information in plain autocad. This is in autocad 2014.
how can i open the project browser and properties box in revit 2013. they just disappeared.
View 3 Replies View Relatedopened autocad 2014 lt today and all my toolbars are gone, as well as alot of my shortcuts.
View 3 Replies View Relatedas above.....desperately trying to find them.
still got dashboard, palettes, design center and properties but absolutely NO toolbars.
I have just downloaded trial verion of AutoCAD for Mac, onto new Macbook Pro.
The two palettes are there on the screen left hand side, but I cannot find the classic toolbars, which I cannot work without.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I have been using my autocad for a few days now and it appears that the program is not operating properly. I am missing toolbars and ribbons. Is this an issue with the trial version, or is there a registry trick to unhide the ribbons?
View 7 Replies View RelatedI click on viewport and properties but Standard scale does not show up on Properties Misc.
View 9 Replies View RelatedI downloaded Gimp the other day, but some windows where missing when opening Gimp for the first time. Left toolbar and photo window, tried to look for i but nothing.
Mac OSxX 10.8.3
Gimp 2.8.6
[URL] .........
I need to add toolbars in 2d annotation ???
View 2 Replies View Relatedwell I was working on my animation, but the toolbars in the curve editor are gone since yesterday. First I tried the "Load Layout" and "Show Toolbars" function. Then I deleted the 3dsmax.ini and Trackview.ini without result. In the end I reinstalled 3ds Max2012 but nothing changed.
View 5 Replies View RelatedI made some toolpallets and i want them to share with my collegas. I know that i can export them amd then import manualy, but is it possible to set the files of the toolbars on the server so if i change anything everybody has the same?
I dont want to import and export them everytime i change something.
I have just updated to 2013 LT. I want to customize my toolbars to match my old set up but once I've spent ages moving tools to new folders and arranging them how I like it, I close Autocad then open it again and it reverts back to default so all that time editing folders etc is wasted!!
View 2 Replies View RelatedA client is experiencing a problem whereby when he runs his software,Inventor Professional-Autodesk Product Design Suite 2013, he gets the blurred toolbars as in the attachment.
View 1 Replies View RelatedI have 1 user who refuses to learn the ribbon and turns every toolbar known to man on.
It has been suggested that I could remove his ACAD.cui (menuload, then unload). Is this the best way to make sure he cannot use them at all and is forced to learn the ribbon?
Another option I have is to simply click the View tab and uncheck the User Interface panel, but he could just as easily turn it back on as soon as I walk away, or even better he could turn on the Menu Bar from the quick access toolbar and add them through the View pulldown menu or just type in CUI and turn toolbars on that way also.
I finally cleared enough space on my creaky old PC to install 2013 and once again am having trouble with that CUI.
The ribbon is useless to me, partly because it contains nothing relevent (most of the commands I use are legacy) and partly because this creaky PC can't handle it. My usual workspace is set to toolbars (some custom) and menus.
I exported my workspace from 2012 including all the menus and toolbars.
I imported that cuix file into 2013. Everything is there listed as it should be, but when I select the workspace and click apply I have neither toolbars nor menus showing (well I have a tiny toolbar with just new, open and save on it, and another that appears to be related to survey, but none of the ones I want or need.)
What do I have to do to get my menus and toolbars back? they haven't abolished them completely? This PC cannot handle the ribbon and my every request for an upgrade is denied due to politics.
i wish to migrate all default icons of AutoCAD2007 to AutoCAD2014: i' ll wish to overwrrite default icons of 2014 with icons 2007
i know that i can do this with cui save every icon in a bmp file and sustitute every icon of 2014 with bmp file of 2007....
but i think it s so boring and long to do...
does it exist any faster mode?
P.S. i tried to export in a cui file all default toolbar of 2007: ii opened it in 2014... but icons are 2014 default!
same file cui opened in 2007 and 2014 has different icons images
Every time I open ACA 2013, my toolbars that I have loaded turn off. Well currently only the layers toolbar remains, my custom toolbar and the properties toolbar turn off every time I open ACA with the icon or the exe file itself. If I open a drawing file the toolbars seem to remain. I also just installed the service pack, no change.
View 1 Replies View RelatedI cannot find the Standard Scale list anywhere in my 2010 version of AutoCAD. Only the Annotative Scale list is visible and usable. Note: it's not that certain scale values are missing, it's that the entire Standard Scale function is no where to be found!
I need to be able to change the scale of a viewport, but the Standard Scale list is not included as an option in the Properties Dialog box, nor is it in any of the other suggested places where it should be. I've used the Standard Scale list many times before in previous versions of CAD and from everything I can tell 2010 should have it.
Juts had Acad LT 2009 re-installed on my new laptop, and all of my old settings, desktop preference etc have been wiped. No problem, couple of hours to set it back up.
BUT
When right-clicking on any object to bring up the properties, (line length, text height etc) the properties do not appear in the drop down box on the right, or in any 'quick properties' display
I used architecture on my pc. I installed Autocad on another pc with the same Serial code. I can see on the top that my version suddenly is a Educational version. I'm telling you this because i don't know if this is the reason of my problem.
The problem: i can't see the properties of an object when i use autocad architecture in the educational version.
For example: I make a wall and i place a window in the wall. Now i want to change the width of my window, using the properties bar. SO i click on my window (right mouse button) and click on PROPERTIES. It opens the properties bar BUT i can't see the window and his properties. At the top of the properties bar it says "No selection".. How can this be when i begin with the right mouse click on my window?
When i do it in the other direction: Open properties (ctrl+1) first and then select for example my wall, still nothing changes in the properties bar!
I would like to make some sort of an "online" catalog where the engineers could review details, and just tell the draftsmen the details they would like to include in their design set. I'd be very interested in any system that you might use. We, at one time, used printed booklets for the engineers, but got to be a hassle when details changed. Is there a good software system that might make this an easy task?
View 4 Replies View RelatedWith reference to the standard hydraulic symbols which are contained within the library in Autocad 2013,
To which standard they conform i.e. : ISO 1219-1 ?
My company have created a standard cui that we all must use and cannot be changed in any way.
Whilst I agree this is a good idea, there are a lot of command icons missing from the ribbon which I use frequently.Is there any easy way I can add these to my cad setup ?
How can I restore my object properties dialog box in its default state? I'm recently working on a project when my Autocad Architecture 2013 just stopped working while it was saving. When i re-opened the file, I just noticed that the object properties doesn't show the full parameters of a certain object anymore. The width,height and other parameters in adding a wall is not included in the properties dialog box. Same scenario goes for all the objects, when i click on a dimension line or any line, an incomplete dialog box appears. Solutions that i've tried but nothing worked:
1. Changed User Profle Preferences
2. Changed my .CUIX in the customization file
3. Restart Autocad
4. Reset Autocad
5. Reinstalled Autocad
6. Downloaded and Installed Autocad Architecture 2013 service packs 1&2
I'm Using Autocad Architecture 2013 64 bit and OS windows 8 64 bit.
There are different results when executing polar array using the 'classic' method and the array using ACAD's standard array. I tend to revert back to the classic array as I find this more user friendly and tend to use this one over the standard ACAD array. Which methods are preferred by other CAD users ? I was wondering if any other CAD users prefer any other 'classic' functions over the standard ones. I sometimes use 'classiclayer' as well because of a display issue, not sure if this is a common bug that other users have found too ?
View 8 Replies View Relatedim trying to do is print on standard 8.5" X 11" paper but for some reason it keeps cutting off the top and the bottom. ive tried changing the plotter settings around but to no avail. its like theres a certain amount that it refuses to pring on the bottom. no matter what, the is always a .5" gap at the bottom. i can get it to print to the very edge of the top. just having issues with the bottom. ive also tried using plot calibration and all of that is fine
See photo for what im getting. and yes its doing it when i make pdf's too.
How can I get the drop down menu of previously input data to come back? I was here on a previous computer so I assume its something in the part catalog or part builder?
Currently operating Autodesk Civil 3D 2012, AutoCAD 2012, Bentley MicroStation V8i
I use the Map function within Civil 3D 2012 to export municipal GIS data from shp files, for our base plans. One of the clean-up functions is to convert the text exported from GIS to an appropriate text style suitable for the project. To do this, I would select the text, use the select similar command, then update the text style in the properties window. This process has worked well when using Civil 3D 2010 and 2011, however, I have noticed in 2012 the "style" option is not available.
Not sure what I mean, have a look at the two attachments. Notice in the C3D 2012 image, there is no "style" option, while the C3D 2010 image includes the 'style" option. I submitted this bug to our reseller, who was able to replicate this error. Our reseller submitted this to Autodesk, who was also able to replicate this error. What is interesting is if I open the drawing that contains the map exported data from C3D 2012 in either 2010 or 2011 versions, the "style" option is available, just not in 2012. This leads me to believe the issue is not with the data or the export functionality of 2012, the issue is with 2012 displaying the data property. Autodesk has forwarded this issue to their developers, no indication of when or if it will be resolved for Civil 3D 2012.
My workaround for now is to use Civil 3D 2010 for the drawing cleanup functions. Fortunately I am able to have previous versions of Civil 3D installed, since I am on subscription. My advice is when upgrading, do not remove your previous versions if you are on subscription, you may need to use it one day.