AutoCAD Civil 3D :: Menus And Toolbars Won't Show In 2013?
Sep 24, 2012
I finally cleared enough space on my creaky old PC to install 2013 and once again am having trouble with that CUI.
The ribbon is useless to me, partly because it contains nothing relevent (most of the commands I use are legacy) and partly because this creaky PC can't handle it. My usual workspace is set to toolbars (some custom) and menus.
I exported my workspace from 2012 including all the menus and toolbars.
I imported that cuix file into 2013. Everything is there listed as it should be, but when I select the workspace and click apply I have neither toolbars nor menus showing (well I have a tiny toolbar with just new, open and save on it, and another that appears to be related to survey, but none of the ones I want or need.)
What do I have to do to get my menus and toolbars back? they haven't abolished them completely? This PC cannot handle the ribbon and my every request for an upgrade is denied due to politics.
View 1 Replies
ADVERTISEMENT
Mar 24, 2012
I loaded a partial customization file by CUI dialog. I would like to programmatically hide / show the menus and toolbars, so when you restart AutoCAD to be permanently hidden or visible.
View 3 Replies
View Related
Jan 31, 2013
I have a new Dell XPS15 laptop with Windows 8. Installed Photoshop CS6 & all tool bars and menus are too tiny. I've contacted Dell Support and Adobe Support and everyone blames other.
View 1 Replies
View Related
Jun 7, 2012
I was thinking my menus and toolbars customizations were storage in:
C:Users...DocumentsCorel PaintShop Pro14.0
I had copied all content of this folder to restore after have formatted my computer. But menus and toolbars weren't restored when I replace all the content of this folder.
So, I lost all my customizations. Where they are storage? What should be the folder to be backed up in order to recovery menus and toolbars customizations in new PSP installs?
View 6 Replies
View Related
Nov 10, 2012
I need assistance. How doI change the font size or sizes of menu options on photoshop elements 9 so I can see to use the program, everything is so tiny, even the X's to close out the program.
View 2 Replies
View Related
Jan 16, 2014
Just started new job, with PC running ACAD2010. My toolbars appear blank, with no icons. How do I get the icons to show?
View 4 Replies
View Related
Dec 20, 2013
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 9 Replies
View Related
Dec 10, 2012
When I try and load my cui file, my custom toolbars and settings do not show up?
View 9 Replies
View Related
Mar 8, 2012
Created some pulldowns and icons to go along with the new commands. Put the cui files on the server for everyone. Question is ... How/Can I make the icons go with them. Are they associated with the CUI automatically. Guy at work is running MEP and everyone else is running plan old cad. They are not showing up on his. Is there a way I can fix this?
View 1 Replies
View Related
May 2, 2012
I need to add toolbars in 2d annotation ???
View 2 Replies
View Related
Mar 6, 2010
I installed Express tools when I installed 2010. when I type the "menubar" command the only thing that shows up is" Express". how do is get the rest of the drop down menus to show up?
View 9 Replies
View Related
Jan 9, 2013
I made some toolpallets and i want them to share with my collegas. I know that i can export them amd then import manualy, but is it possible to set the files of the toolbars on the server so if i change anything everybody has the same?
I dont want to import and export them everytime i change something.
View 7 Replies
View Related
Jan 22, 2013
I have just updated to 2013 LT. I want to customize my toolbars to match my old set up but once I've spent ages moving tools to new folders and arranging them how I like it, I close Autocad then open it again and it reverts back to default so all that time editing folders etc is wasted!!
View 2 Replies
View Related
Nov 1, 2012
A client is experiencing a problem whereby when he runs his software,Inventor Professional-Autodesk Product Design Suite 2013, he gets the blurred toolbars as in the attachment.
View 1 Replies
View Related
Jun 26, 2013
I have 1 user who refuses to learn the ribbon and turns every toolbar known to man on.
It has been suggested that I could remove his ACAD.cui (menuload, then unload). Is this the best way to make sure he cannot use them at all and is forced to learn the ribbon?
Another option I have is to simply click the View tab and uncheck the User Interface panel, but he could just as easily turn it back on as soon as I walk away, or even better he could turn on the Menu Bar from the quick access toolbar and add them through the View pulldown menu or just type in CUI and turn toolbars on that way also.
View 9 Replies
View Related
Oct 17, 2012
I have a bunch of discipline specific menu files as partial cui's to my enterprise menu. I don't want to show them all, as some users may not need them all. What I would like to have is a menu item
Load Menus ->
Civil
Electrical
Mechanical
Structural
and when they click on one of them the relevant menu file is made visible in the current workspace. Is there a simple way to do this?
View 5 Replies
View Related
Jan 7, 2013
When I first time use AutoCAD 2013, my Properties toolbar can be displayed by right-clicking at the pull-down menu at click on the properties. But now I could not find the properties option anymore after right-clicking at the pull-down menu. get back my properties toolbar displayed in my AutoCAD 2013.
View 6 Replies
View Related
Jul 6, 2013
i wish to migrate all default icons of AutoCAD2007 to AutoCAD2014: i' ll wish to overwrrite default icons of 2014 with icons 2007
i know that i can do this with cui save every icon in a bmp file and sustitute every icon of 2014 with bmp file of 2007....
but i think it s so boring and long to do...
does it exist any faster mode?
P.S. i tried to export in a cui file all default toolbar of 2007: ii opened it in 2014... but icons are 2014 default!
same file cui opened in 2007 and 2014 has different icons images
View 6 Replies
View Related
Oct 16, 2012
Every time I open ACA 2013, my toolbars that I have loaded turn off. Well currently only the layers toolbar remains, my custom toolbar and the properties toolbar turn off every time I open ACA with the icon or the exe file itself. If I open a drawing file the toolbars seem to remain. I also just installed the service pack, no change.
View 1 Replies
View Related
Jan 25, 2012
Using Xara Photo & Graphic Designer 7 7.12.19319
I can't get the sub menus to show in my left main tool bar.
In past versions all I had to do was click on the little arrow and I was shown a choice of sub tools.
Is there something I have to do now in "Options"?
View 2 Replies
View Related
Jul 2, 2013
Windows 7. AutoCAD Civil3D r13 and 14.
Yes the toolbars are unlocked and even when they are locked using the ctrl key still will not alow me to resize. This used to work but now for some reason will not anymore.
View 8 Replies
View Related
Feb 23, 2012
Every time I switch from my "Civil3d" workspace to "3D Modeling" and back again, all my toolbars disappear. Not the end of the world but certainly a pain in the butt.
View 4 Replies
View Related
Jan 19, 2013
I used to have an add-on called Xtabs that would make my drop-down menus (layers, linetypes, etc.) go all the way to the bottom of the screen. In 2013, I changed to interface to classic, so that it looks more like it used to, but the add-on does not appear to be available anymore. Is there a built-in way now to do this?
View 1 Replies
View Related
Dec 10, 2012
when trying to load our custom menu i get the following error.
Write permission denied. Unable to create C:program files Autocad 2013SWRMenuSWR.cruix.
View 5 Replies
View Related
Jun 2, 2012
This issue applies only to AuroCAD 2013 64. 2012 works fine.
I have three old custom menus I use regularly. They were all in the MNU format when they were compiled to CUIx.
Let's say menu1 has a drop down menu and toolbars. Menu2 has a dropdown menu. Menu3 has a toolbar menu. They are all located in the same folder.
If I load the three menus they work fine for the duration of the session. However, once I quit AutoCAD and restart, only Menu1 loads. I still have to load the other two again. This is annoying. I have created a Profile and a Workspace with the menus loaded and set both current. Exit and again no menus.
View 9 Replies
View Related
Apr 5, 2013
I am trying to change my shortcut menus. Instead of modifying the current default mode, I am trying to make a new default mode menu and preserve the original. I have made the new menu and named the aliases POP501 & CMDEFAULT. But, when I right click the mouse, civil 3d still references the original default mode menu. How do I change this?
View 5 Replies
View Related
Sep 11, 2012
We installed Civil 3D onto my supervisor's computer, and I can't find the menus. It's like they completely vanished. I set menu bar to 1, and the only menu I get is the Express menu. I don't get any of the other menus (file, alignments, profiles, grading, etc.).
View 2 Replies
View Related
Sep 23, 2013
Just installed 2014 Civil 3D. In 2013, I had created screen menu layout for Lite Users, where I placed the old Standard and Express Tools Menus along the top of the CAD window, just below the Ribbon. To do this I would Rt. Click in the Grey area (just below the Ribbon and above the CAD window), and then be able to choose menus from the AutoCAD, CIVIL, or EXPRESS menu groups.
In 2014, when I Rt.Clk. in the same area, I'm not given a way to select menus to add - as in 2013.
Is there another way to manually load the Standard AutoCAD and Express menus to the screen, in addition to the Ribbon, etc?
View 3 Replies
View Related
Oct 28, 2013
Lately, whenever Civil 3D crashes, my menus and ribbons would freeze, but my command line still works. It's like the entire user interface locks up. I'm able to workaround the problem by rebooting the computer and then recovering any drawings I had open at the time of the crash.
-Civil 3D 2013 sp2
-Windows 7 64-bit
-Intel i7 Dual Core with 2.40 GHz
-8 GB of RAM
-AMD Radeon HD 6770M
-Civil 3D user since 2007
View 6 Replies
View Related
May 30, 2012
Granted this is a minor issue, but when Revit 2013 is opened, before actually opening a project file, if I click the add-ins or some of the other menus, they don't appear in the right spot. See attachment as an example.
View 9 Replies
View Related
Jan 18, 2011
In dialog boxes the drop down menus appear blank until I drag the mouse over it then the contents appear as I drag the mouse across. Also the cursor doesn't echo back (flash). I have tried updating drivers to no avail.
Running Civil 3D 2011 with all updates.
Windows 7 64 bit
16 gig ram
Quadra fx 1800
Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz
I have attached a couple images to illustrate.
View 9 Replies
View Related
