I have a bunch of discipline specific menu files as partial cui's to my enterprise menu. I don't want to show them all, as some users may not need them all. What I would like to have is a menu item
Load Menus ->
Civil
Electrical
Mechanical
Structural
and when they click on one of them the relevant menu file is made visible in the current workspace. Is there a simple way to do this?
A plugging we use has just updated and loading double menus causing error messages prompting that menu already exists unable to load.
In my cui the menus are loaded in my enterprise as well as my main.
How do I keep the menu with the same name in my enterprise yet unload the one of the same name in my main (where it shouldn’t be) using lisp (I want to Automate this using lisp, since I'm not always in office at the same time as everyone else)?
I am able in lisp to create a command prompt selection menu, easy (see code below).However what I want is for the lisp to be ready to undertake an action UNLESS I select an option.
An example is the offset command wich has a function ready to roll (namely the specify offset distance) "OR" I can interrupt the "specify offset distance" and enter one of the sub options (in the case of offset Through/ Erase/Layer).
My code attempts to offset also, UNLESS the user wishes to specify a distance.
(DEFUN C:loadoffset ();CREATING MENU FOR SUB COMMANDS [GETIT] [GOTIT]...(setq choose (getstring "
Select an option... [1=GET DIST] [2=GOTDIST]: "))(if (or (equal choose "1"))(GETIT))(if (or (equal choose "2"))(GOTIT));TERMINATING SELECTION MENU...)(defun getit ( gotit )(setq MYDIST (getdist "
SELECT A DISTANCE: "))(gotit))(defun gotit ()(command "_offset" MYDIST pause pause"exit"))
I have made an extra CUI that is loaded as a partial CUI.
Now I want to add a context-sensitive shortcut menus like this: POP504, OBJECT_AEC_DOOR.
The problem is that this shortcut menu only shows up if I add the shortcut menu to the main CUI file. If I add it in some partial CUI it never shows.
Does shortcut menus only work from within the main CUI?
How do I tranfer all my standard autocad variable settings into a new version of Architecture? I have my dimensioning settings, etc set a certain way in my standard autocad and now I want to start using Architecture but need all my old settings.
View 9 Replies View RelatedI'm able to add custom panels/buttons into the Ribbons, by cloning the existing ribbon (from acade.cuix) into my partial cuix. However.. I'm not able to add more commands to the shortcut menus, using the same technique.
Is it possible to add custom commands to existing shortcut menus using a partial cuix?
How to save my workspace and load onto another machine? Both systems are running AutoCad 2011 and may soon change to 2012.
I figured out how to customize the ribbon and panels, and I even customized my shortcut menus. I then created my Workspace and "Saved As". Now how do I get this workspace loaded onto my Laptop with a seperate AutoCad License?
I am unable to find the "Ribbon Combo Box - Workspace" to our 2013 MEP or ACA CUI. It is visible in vanilla AutoCAD 2013, but it isn't listed in the Command List (under Ribbon Control Elements). I am unable to transfer it from AutoCAD's cuix either. We typically have this control in our Quick Access Toolbar, but I am unable to create this same environment in the 2013 verticals.
I am unable to see it even using one of the default profiles, like "AutoCAD Architecture (US Imperial)".
I loaded a partial customization file by CUI dialog. I would like to programmatically hide / show the menus and toolbars, so when you restart AutoCAD to be permanently hidden or visible.
View 3 Replies View RelatedIs there a way to toggle between customized old style menus and new style workspaces?
View 1 Replies View RelatedI have a little routine to add two selected numerical texts together and show the result at a selected position. I am using the entsel method to select them. I would like a way to highlight the selected text temporarily. Is this possible. The routine is as follows.
(defun c:T+ ( / Txt1 Txt2 Txt3 Pkt )
;Adds second selected number to first
(setvar "dimzin" 3)
(setq curlay (getvar "clayer"))
(setq curcol (getvar "cecolor"))
(setq curlin (getvar "celtype"))
(setq ds (getvar "dimscale"))
[code]....
through the groups here I have found the redefine screenmenu command, but I cannot find how to get the screen menu up on the screen as it is not an option in the display options any longer.
View 4 Replies View RelatedLooking for Lisp command to show (read/assign variables) to normal or custom properties in an object?
View 7 Replies View RelatedIs there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedIs there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedWe run 6 seats of Map 3D 2012. We are upgrading computers but want to remain with 2012 for the time being.
Our old machines were 32 bit; the new ones 64 bit. I am having to load the 64 bit version of Map 3D fresh to all the stations (individual; not network)
I have set up custom menus and a preferred workspace on my station some time ago. I don't want to have to reconfigure everything from scratch.
What files do I need to save and how do I access them once I have reinstalled the new version?
Is it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedI have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies View RelatedI'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).
Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me:
node
of #<variant 8197 ...>
Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?
What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn
[Code].....
Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.
I believe I need to insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?
I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.
what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.
(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)
I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt
it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)
test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg
(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!
(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...
and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.
I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
the following returns true since the @ symbol tests for an alpha character.. (wcmatch "S101" "@*").What is the Dot Net equivalent?
View 2 Replies View RelatedIs there a command that is the opposite of starting an application to open up a file? Like:
(startapp "PlaySound.exe" (findfile "CuckooClock.wav"))
Instead of starting an application, how to shut all of its instances down. Let’s say I have iTunes and/or Internet Explorer w/ a few tabs open and I can close them down without getting to the application to terminate it the usual way.
Naturally,
(endapp "iTunes.exe") doesn’t work :-))
