I loaded a partial customization file by CUI dialog. I would like to programmatically hide / show the menus and toolbars, so when you restart AutoCAD to be permanently hidden or visible.
View 3 RepliesI finally cleared enough space on my creaky old PC to install 2013 and once again am having trouble with that CUI.
The ribbon is useless to me, partly because it contains nothing relevent (most of the commands I use are legacy) and partly because this creaky PC can't handle it. My usual workspace is set to toolbars (some custom) and menus.
I exported my workspace from 2012 including all the menus and toolbars.
I imported that cuix file into 2013. Everything is there listed as it should be, but when I select the workspace and click apply I have neither toolbars nor menus showing (well I have a tiny toolbar with just new, open and save on it, and another that appears to be related to survey, but none of the ones I want or need.)
What do I have to do to get my menus and toolbars back? they haven't abolished them completely? This PC cannot handle the ribbon and my every request for an upgrade is denied due to politics.
I have a bunch of discipline specific menu files as partial cui's to my enterprise menu. I don't want to show them all, as some users may not need them all. What I would like to have is a menu item
Load Menus ->
Civil
Electrical
Mechanical
Structural
and when they click on one of them the relevant menu file is made visible in the current workspace. Is there a simple way to do this?
I have a new Dell XPS15 laptop with Windows 8. Installed Photoshop CS6 & all tool bars and menus are too tiny. I've contacted Dell Support and Adobe Support and everyone blames other.
View 1 Replies View RelatedCS3
I have by chance got PS to auto hide & show the toolbars and I have now lost it again.
as the toolbars are out of sight and only visible when I need it.
I was thinking my menus and toolbars customizations were storage in:
C:Users...DocumentsCorel PaintShop Pro14.0
I had copied all content of this folder to restore after have formatted my computer. But menus and toolbars weren't restored when I replace all the content of this folder.
So, I lost all my customizations. Where they are storage? What should be the folder to be backed up in order to recovery menus and toolbars customizations in new PSP installs?
I need assistance. How doI change the font size or sizes of menu options on photoshop elements 9 so I can see to use the program, everything is so tiny, even the X's to close out the program.
View 2 Replies View RelatedJust started new job, with PC running ACAD2010. My toolbars appear blank, with no icons. How do I get the icons to show?
View 4 Replies View RelatedWhen I try and load my cui file, my custom toolbars and settings do not show up?
View 9 Replies View RelatedCreated some pulldowns and icons to go along with the new commands. Put the cui files on the server for everyone. Question is ... How/Can I make the icons go with them. Are they associated with the CUI automatically. Guy at work is running MEP and everyone else is running plan old cad. They are not showing up on his. Is there a way I can fix this?
View 1 Replies View RelatedI installed Express tools when I installed 2010. when I type the "menubar" command the only thing that shows up is" Express". how do is get the rest of the drop down menus to show up?
View 9 Replies View RelatedIn inventor it's possible to hide "for ever" a message box by a clic on "never show this message again ".
How is it possible to show this message again?
Sometimes I turn various parts (visibility) off in an assembly. If I want to turn them all on again without doing it one at a time or selecting them all individually, I find IV turns everything OFF first, then I have to reselect them all again and turn evrything on. Can it be done in one step instead of two? IV2008SP1
View 9 Replies View Relatedhow could I use these functions "AssemblyAllVisibleDesignViewCmd" and "AssemblyAllInvisibleDesignViewCmd " to show and hide all parts?
View 2 Replies View Relatedruning autocad 2010, i want to create a keystroke to hide /show a specific layer, how can i do it?
View 5 Replies View Relatedthere is a way to show or hide a specific object (not the layer it is sitting in) in a specified viewport without affecting its visibility in model space or other viewports. I came across a .vlx file from www.cadstudio.cz/dl./hideshow.vlx that does the job of showing or hiding an object in model space( and hence in all viewports).
View 5 Replies View RelatedI have a drawing with a detail, I want to hide dimension from the big view port and show it in the detail as you can see in the picture:
I use Annotative dimension.
Using Xara Photo & Graphic Designer 7 7.12.19319
I can't get the sub menus to show in my left main tool bar.
In past versions all I had to do was click on the little arrow and I was shown a choice of sub tools.
Is there something I have to do now in "Options"?
I'm looking for a way to hide a layer in model space, but show it on ONLY my paperspace tab. Problem is, most of my work is in model space (different aspect of this drawing), and although I could pull the objects through to the paperspace tab, it just wouldn't be the way I feel it should be (3d objects should stay in model space imo). However, for the most part I don't need to see it in model space (except for checking 3d elevations of line segments), the finish product is a printed 2d top view.
View 5 Replies View RelatedI saw some years ago a 3D drawing where hidden lines were dashed after hide command. I tried to find out, how it was made, but nothing. Today I need this solution, but I can't find information, how is it possible.
View 2 Replies View RelatedIn webdev it is not unsual that design involves multiple variations like "pages" where mostly header and footer stays the same while its "content" (the page itself) changes. And then simulate a navigation by means of hiding and unhiding each respective "page" folder. Where also the site's menu tranforms as "navigation" evolves.
It is a bit frustrating in order to achieve this to have to create a lot of duplicated menu folders and place'em under every "page" just to represent this selected links. And then if you have to redesign that menu, you have it spreaded throught several folder locations.
I think being able to hide/unhide linked layers at a glance of a click would be nice to have and would allow you a more strealined work while redesigning linked portions.
Is there a one key click that will turn a layer mask off and on?
Because moving the mouse away and back to retouching all the time is quite a drag.
Im i trying to save some time and manual work by using an action or script to do most of the work for me, but cant seem to figure out how to do it right. Now its for a jewellery customization site, where you can choose ring, stone, color etc.
I have all images as separate images (on white background) but placed in exact the same position, so they can be placed right on top of each other and exported. Even though its a fairly simple process this would take a long time, as there are many combinations!
if i hide some layers or do something in photoshop it doesn't show the changes but when i choose fit to screen/actual pixel option then it shows the changes.Is there any manual autorefresh option in photoshop in settings.??
View 3 Replies View RelatedI don't seem to have those options (show/hide Parent) when right clicking on folders in the tree. The way I have been organizing in LR4 is by creating a new top level folder and dragging the individual folders into that new folder (within LR).
I will be moving to a new computer soon and want to make sure the move goes well...
Whenever i click on Show or hide the Attribute Editor And the Channel Box/ Layer Editor are working fine But when i press Show or hide the tool Settings its not coming up..
View 3 Replies View RelatedIs there a way to hide/show title safe area in Illustrator?I know I can turn it on or off using the artboard options, but for ease of workflow I'd like to be able to switch it on/off as I can do using 'Cmd :' for guides?
I know I can show/hide video rulers and I have mapped this as a keyboard shortcut... but can't find any way to do the same with title/action safe?
I have a project in Edge with a couple of screens as symbols on layers in the main timeline. I've been trying to write a function in the global scope that I can call from all the buttons, to show and hide screens.
So far I have a function that looks like this:
function mainScreenOut (){
sym.$("screen1").hide();
}
But this and many variations don't seem to work. how to use these jquery commands properly?
I'm trying to hide all items in a document (and store each items original visibility state), iterate user pre-selected items and perform an export for each item in selection (I've got this part covered), and finally restore the visibility state of each item again (here's where the storing of original visibility state is needed).
I've found that I can iterate all items in the document using app.activeDocument.pageItems[i] where i is the page item identified by the i-th index in the pageItems collection.
What is not clear, however, is how to get the visibility state of this page item. Indeed, there is a property visbilityVariable associated with page items, but when I try to "inspect" its content using an alert message, I get "undefined".
Are there better ways to iterate all items in a document? Ideally, I'd like to access all items regardless of wether they're path items, group items, text frame items or what have you. I need this collection to read/write the visibility state of each individual item.
I have two elements that need to be hidden:
"mov-imp"
"mov-pim"
Currently, I am doing this:
var arr = ["mov-imp", "mov-pim"];
// This is the onclick function
sym.$.each(arr, function(){
$(this).hide();
}
)
What's the best way to show/hide multiple elements/symbols in AE?
Is there a way to create a keyboard shortcut to hide a layer? I'm building a drawing by tracing a bitmap on a separate layer. I turn the layer visibility off & on a lot to check my work.
I have so many objects, the little eyeball in the object manager keeps scrolling out of its window .