AutoCAD 2010 :: Hide A Layer In Model Space But Show It On Paperspace Tab
Mar 15, 2012
I'm looking for a way to hide a layer in model space, but show it on ONLY my paperspace tab. Problem is, most of my work is in model space (different aspect of this drawing), and although I could pull the objects through to the paperspace tab, it just wouldn't be the way I feel it should be (3d objects should stay in model space imo). However, for the most part I don't need to see it in model space (except for checking 3d elevations of line segments), the finish product is a printed 2d top view.
View 5 Replies
ADVERTISEMENT
Mar 19, 2013
I dont use paper space at all. i mostly work in model. but i just want to explore the paper space side.
I have my lpaperspace dimscale set at 1
In the model space my picture is drawn to scale, so its like 12 feet tall.
when i put the viewport in and get the picture positioned in the viewport, when i dimension the model in the viewport my dims are set according to the paperspace dimscale.
is there a way i set the dimscale in the viewport at a different dimsale then the dimscale set in the paperspace without having to set the dimscale in the model space?
View 4 Replies
View Related
Aug 22, 2012
Suddenly, this week, Paperspace no longer has a 0,0.
For decades I've inserted my Titleblocks in Paperspace at 0,0.
This week, it inserts it relative to 0,0 in Modelspace in one of the Viewports.
Which means the Titleblock is "Waaay Offf" to quote Rodney Dangerfield.
If I draw a line in Paperspace and start it at 0,0, again, it's the Modelspace 0,0 in a Viewport.
Was this an improvement that I didn't know of?Or did I accidentally change some setting?
View 5 Replies
View Related
Feb 22, 2012
I'm looking for a lisp that will allow me to switch from Model Space to Paper Space and vice versa.Looking for another option other then the "Quick View Layout/Drawings".
View 6 Replies
View Related
Jul 4, 2012
I am having difficulties with the scale of my drawing. In my model space, the units are set to decimal - millimeters. And then, when I set up a viewport in paper space even 1/128"=1'-0" is too small. I'm using a size 24"x36" paper. Everything is set to 1:1 and I drew 1:1 in model space. Previously, another person drew this drawing and it fit on an 8x11 sheet of paper at 1:10, but mine doesn't fit on 24x36.What did I do wrong?
View 9 Replies
View Related
Jul 14, 2010
I am currently using the following to switch to modelspace:
Editor ed = Application.DocumentManager.MdiActiveDocument.Editor;ed.SwitchToModelSpace();
However if you already are in modelspace it throws the error: eInvalidInput
How do I find out which space I am in so I can avoid running this when already in modelspace?
View 3 Replies
View Related
Apr 14, 2013
I want to create finished paperspace-tabs, with a specific layer-configuration.
How can I manage that?Each tab has to be exported to PDF as a finished configuration, without changing layers in the end.
View 1 Replies
View Related
Mar 25, 2013
We have just loaded AutoCAD 2013 from previously using Version 2012, and I am experiencing a very distubing phenomenon. While manipulating the commands in any vieport window in Model Space, the program automatically 'jumps' into Paper Space causing an interruption in work-flow, and losing any command which was in progress during the time. For example, if a number of objects were copied with the intention of placing them elsewhere within the same or another paper space window in 'model space' , the program would jump to paper space and the items would be lost, with the necessity of selecting them all over again. This can happen several times in a row.
View 9 Replies
View Related
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
Aug 21, 2011
I'm working on a plan that contains an xref with some elements that are not visible in paper space at my chosen scale. The xref is an annotated structural grid. It is entirely visible in model space, but in paper space only the grid is visible, annotations such as dimensions and section cut indicators are not. Strangely, or maybe not, when I change the scale in paper space, these elements appear.
Other presentation tabs exist, created by other people, that use a different scale and those presentations properly display. The annotations are blocks in the xref document, and I wonder if those blocks could somehow be set to only display at a certain scale. I don't see any such options in the block editor. Although, I have added to this document, I did not create it, nor the xref or the blocks.
View 2 Replies
View Related
Jul 9, 2012
Am using Autocad 2012 with SP2 downloaded, note the problem does not occur in Autocad 2013... So basically if you open the dwg you will see it opens in paperspace, the viewport is locked to a specific scale etc. Now go into model space where the dwg is, you should be able to zoom around, pan etc fine, problem is when you now go back into the layout or paperspace. You will notice that upon re-entering paperspace that the vport is highlighted, ie there is a thicker outline of the vport boundary, however am still in paperspace according to the tabs. When you now try zooming in or out using the mouse scroll you will notice an additional copy of the viewport is imprinted on the screen. Thats the problem. Doing a few undos will set you back right again.
So far we are inclined to think that its either something to do with the UCS or the units that the program is getting confused with but havent been able to find a solution. Also bear in mind that it seems to work fine in 2013. Its probably something really simple that we've missed but thought would try anyway Will attach the dwg file.
View 2 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Mar 26, 2012
I have a floor plan xreffed into model space, visretain=1 and i can see the room numbers. I switch to paperspace and go to layer properties and highlight all layers and then turn on all layers in he drawing and thaw in all three columns and still the room numbers do not show. The layer listed in model space is on and thawed. Why won't it show?
View 2 Replies
View Related
May 2, 2012
determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
View 4 Replies
View Related
Mar 15, 2012
I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
View 4 Replies
View Related
Mar 13, 2012
So I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.
What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.
View 1 Replies
View Related
Sep 9, 2012
runing autocad 2010, i want to create a keystroke to hide /show a specific layer, how can i do it?
View 5 Replies
View Related
Jan 17, 2013
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
View 3 Replies
View Related
Apr 13, 2012
Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies
View Related
Jan 16, 2013
All lines in model space appear thicker when I zoom in.
how to change this behaviour so they show the same weight thin in the computer window?
View 3 Replies
View Related
Nov 10, 2011
There must be a way to get the line weight to show in model space. It shows up as specified in print preview and printed, but not on the screen. Is there a setting for this?
View 6 Replies
View Related
Apr 17, 2013
I am running the antique CAD 2004 and went to layouts to start setting up a page. When I drew in the view port, it does not show anything of the model space, zero, zip, nada. Tried "Scale to fit", a new view port with no luck. I opened another project file, it work perfectly, just not this one. It doesn't have any Xref's that I can see, but it does have some proxy objects.
View 3 Replies
View Related
Jul 18, 2011
I cannot get my dashed lines in my model space to show up dashed in my viewport.
I already tried MSLTSCALE = 1 in model space and PSLTSCALE = 1 and LTSCALE = 1 in paperspace.
it did not work.
View 9 Replies
View Related
Nov 27, 2011
I've been using AutoCAD for a while now, started with 2011 and now I'm using 2012. However, the one issue I've never been able to resolve is how to get my linetypes to show in model space properly, and then how to get them to show the same way in paperspace.
I know it has something to do with, at least, LTSCALE and PSLTSCALE. I've never know the 'formula' to make those work - it takes a lot of trial and error before they work together. Is there a trick to just making all of this work, without changing scales and regenerating countless times?
The current drawing I'm working with; I'm drawing in 1:1, with my viewports set to 1:100. My LTSCALE is 500, and my PSLTSCALE is set to 0. That seems to make things 'work' but, I can't figure out how to always just make these values work.
I should add I've checked the forums for a 'magic' answer and, there doesn't seem to be one. Is this the way it really is? I thought AutoCAD would be a little more intuitive than just 'trial and error until it works'.
View 1 Replies
View Related
Nov 11, 2012
We like to allow user to select a rectagular area in modal scpace. Then the code creates a paperscace viewport in a spcified layout. The viewport will show the selected area. find the old VBA code that achived this and the .net code I am trying with. .Net code always gives some exception.
VBA Code
'Lets find the center of the viewport in paperspace.
Dim center(0 To 2) As Double
center(0) = newWidth / 2
center(1) = newLength / 2
center(2) = 0
Dim lay As AcadLayout
For Each ent In ThisDrawing.layouts
[code].....
View 2 Replies
View Related
Nov 2, 2012
i was working on a building layout that included soil & waste and hot & cold water routes, some detail was needed at 1:100 and some 1:50. i can set up viewports in ps to display the correct layers ok but the model space view got more and more untidy, all text and dimensions are in model space too. if i froze a model space layer to improve things obviously i lost that layer in ps. in the end i copied the xref and did the water services separate. is there a way of tidying up the model space without losing any layers in ps?
View 8 Replies
View Related
Apr 27, 2012
Any way to print/plot a layer in a VPORT, but prevent the same layer from printing in Model Space?
I am annotating my VPORTS with text, but I don't want any of this text to print/plot from Model space. All of the annotations will be on the same layer even though the annotations will appear on multiple VPORTS.
View 4 Replies
View Related
Aug 6, 2012
I have a file thats doing something wierd, when I open it I can see the layouts just fine, the existing viewports show linework from model space. However, when I switch to the model space tab I don't see anything, my mouse cursor dissapears when I move it over the drawing area but reapears when its moved over the ribbon or the prospector/command prompt. Also, when I create a new layout with a new viewport, nothing is displayed in the new viewport. It's like the program cant regen the view? When I went into one of the existing viewports and zoomed out I could see all the linework in model space but when I switch to the model tab it won't show any linework or the UCS indicator or my mouse cursor!?!
View 8 Replies
View Related
Feb 24, 2012
I have done a drawing on my auto cad 2011 on windows and when i open it up on my auto cad 2011 for mac it only shows one layer in model space all the layers are on and thawed. how can i get the rest of my drawing to show up?
View 2 Replies
View Related
Mar 13, 2013
First off, here is what i want to do:
- in model space
- 3 model space view ports (ai_tiledvp 3 "_V")
- different layer state visible in each view port OR different saved view visible in each view port.
I cannot for the life of me figure it out. At the moment, every time i change the layer state (or saved view) in one view port, it changes in all 3 view ports so that they all show the exact same thing.
View 2 Replies
View Related
Nov 26, 2013
Multiple layouts in model space suddenly stopped showing boundaries.
View 1 Replies
View Related
