I have done a drawing on my auto cad 2011 on windows and when i open it up on my auto cad 2011 for mac it only shows one layer in model space all the layers are on and thawed. how can i get the rest of my drawing to show up?
View 2 Replies
I have a bit issue with inserting xrefs in model space .Basically, when I insert the xref in model space, the xref shows in an angle.
View 1 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedI am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies View Relatedhow to get a drawing from model space onto the layout space. I know it's simple but I can't remember how!
View 9 Replies View RelatedPaper space was just introduced the last time I used AutoCAD professionally. I didn't become familiar with it and it seemed like an unfathomable concept then; at least from the way it was explained to me.
So I did some drawing for this guy all in paper space...that was what first opened up in AutoCAD. After five hours and getting ready to send the files, I realize that maybe I should a done it in model space. Is it really going to make that much of a difference? If he wanted me to redo it in model space .
I'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.
i was working on a building layout that included soil & waste and hot & cold water routes, some detail was needed at 1:100 and some 1:50. i can set up viewports in ps to display the correct layers ok but the model space view got more and more untidy, all text and dimensions are in model space too. if i froze a model space layer to improve things obviously i lost that layer in ps. in the end i copied the xref and did the water services separate. is there a way of tidying up the model space without losing any layers in ps?
View 8 Replies View RelatedIt was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
I have received a drawing that is only showing in the first layout tab on a contractor's template. The drawing is in a viewport of course. The drawing does not show in the model space.
1. Is it possible to send a drawing only in the Layout tab?
2. Is it possible for me to do something to view the drawing in model space and how is it done?
3. Could it simply be a compatibility issue between the contractor's.
1.how to differentiate the one drawing in model space using mm and the other one using cm, other one is using m?
2. am confused to know how to configure the units setting, and if someone set mm or cm in modal space does the auto-CAD detect the respective unit setting? e.g. one is using mm and he/she offset 1 unit, say mm, and suddenly i want to change the one unit offset to be m or cm, how does it work?
3. if some one has drawn in m, and i want copy and paste in new MS but i want continuing using different units say mm how does it work?
Any way to print/plot a layer in a VPORT, but prevent the same layer from printing in Model Space?
I am annotating my VPORTS with text, but I don't want any of this text to print/plot from Model space. All of the annotations will be on the same layer even though the annotations will appear on multiple VPORTS.
i'm working on a drawing started by someone else. They do everything in model space...no paperspace and no viewports. drawing and border are both in model space. I'm not used to just model space.
How do i set the scale of the drawing in model space? do i need to use different size borders to get the correct scale? I'm drawing everything 1:1 and i need my final prints to be on 11x17 paper.
on a previous drawingi see that they used a scale of 1/16"=1' but how they determined this scale. going thru other sheets in the setd of drawings it seems that they used different border sizes (but all are printed on 11x17 paper)...some are printed not to scale if they have no set scale...like details.
example of what i need to do:
I need to show a building rooftop plan view (the entire rooftop) on one sheet. on the next sheet i need to zoom into a portion of the rooftop.
normally i would use viewports to do this. but in model space i dont see how this is done. do i need to have a set of different size borders? but how then can i print them on 11x17 without using "scale to fit"?
acad C3D 2011
I have to add dimensions to an architectural drawing in model space
The file is drawn in decimal units (1unit=1meter)
Now I have been asked to ad dimensions in feet and inches to the drawing in order to make it usable to UK
I know that the solution is to use alternate units with Architectural units format, but how mach is the multiplier that I have to use?
I have no experience in British metric system.
So I left the multiplier 25.4 as AutoCAD prompt.
2.81 meters equals to 5'-11 1/4” ?
I’m using AutoCAD 2007
is there any point when you set up a new drawing in setting the drawing limits.
For example I am about to draw up a house plan at scale 1:100 which will be plotted on an A3 sheet. I envisage the floor plans will be on one A3 and the Elevations will be on another A3 sheet. Sections will go on another A3. I will have approx 6 paper sheets set up for this.
I plan to draw the whole lot in model space. Then move it around in paper space so each item is on a seperate sheet.
Is this the correct way to do it. If it is, then what is the point of having drawing limits in Model space? The books I have, say it is good drafting practice to set up limits. But I can't see why Also what is the point of setting up the grid display when half the time you draw right off the grid?
I'm having a problem with Zoom Extent on a poticular drawing. when zooming normally with the scroll wheel it will work with no problems at all.
When I do a Zoom Extents everything in the Model window disapears even the viewcube and small tool bar and minimize and close buttons. but if i go to where the minimzie and close is and click my mouse picks up the command.
If i do a undo i get everything back.
Before Zoom Extents
before ZE.jpg
After Zoom Extents
blank window.jpg
Would this be a system varible or a driver issue. it only seems to do it with this drawing and when this drawing is Xref'ed into another drawing.
I have purged, audit and checked scales. but i'm still getting this problem.
I have started to use Selection Set Manager for drawing previewing and publishing. I was moving drawings that are one to one to paper space to allow SSM usage but I recently found that my client does not want me moving drawings to paper space. He wants to keep his drawings in model space for one to one drawings (electrical schematics, one lines etc).
How can I use SSM for these model space drawings?
I'm trying to get a drawing flipped round in model space so it fits more neatly in a viewport. I need to rotate the model space by about 45 degrees so that a line that looked about 45 degree slope up from left to right becomes a flat line.
I've been trying to use 'ucs' in the command line and then type the degree rotation as this is what it says in the help section but it doesnt do what i want. It asks for an origin point on the x-axis and then i dont know what this means.
I am new to Autocad, Everything was working fine until now...I can access a command via command line or menu or toolbar just fine, but although the command line prompts are working, the model space is not showing my lines, circles, rectangles etc. Nothing new is appearing on my model space. I am not sure what I accidentally changed. This is only true in this particular file, my other files are working fine.
View 1 Replies View RelatedI have a drawing that is shwing model space empty, nothing in it, however on paper space the drawing is there. I can double click my viewport and able to use my drawing commands as normal. what has happened how come i cant see my drawing in model space, like it is hidden, i have tried regen, redraw etc.
View 6 Replies View RelatedI am trying to dimension a 1/8" drawing (in model space) and the text height on the dimensions is so small it is not even readable. I have tried modifying the dimstyle to have an "Overall Scale" of 96 (under 'Fit') and a "Scale Factor" of 1 (under 'Primary Units') and vice versa, but neither is working. I have never had this problem before. I am working in AutoCAD Architecture 2010. Also, when i try to dimension this in paper space, the size comes out ok but it is saying a 6' line is 576'... I would rather dimension in model space anyway but what's up with this? I realize 6 times 96 is 576 but how do you get it to be the right length in paper space?
View 9 Replies View RelatedEverytime I open ACAD2013 and start from the "drawing1" position, model space is unworkably small, we are talking mm here.
How do I ensure that upon opening I have a workable sized model space ?
First off, here is what i want to do:
- in model space
- 3 model space view ports (ai_tiledvp 3 "_V")
- different layer state visible in each view port OR different saved view visible in each view port.
I cannot for the life of me figure it out. At the moment, every time i change the layer state (or saved view) in one view port, it changes in all 3 view ports so that they all show the exact same thing.
We have just loaded AutoCAD 2013 from previously using Version 2012, and I am experiencing a very distubing phenomenon. While manipulating the commands in any vieport window in Model Space, the program automatically 'jumps' into Paper Space causing an interruption in work-flow, and losing any command which was in progress during the time. For example, if a number of objects were copied with the intention of placing them elsewhere within the same or another paper space window in 'model space' , the program would jump to paper space and the items would be lost, with the necessity of selecting them all over again. This can happen several times in a row.
View 9 Replies View RelatedI'm trying to plot a lot of drawing files that are in model space. We use to do this with batch plot. Is there still a way to do this in 2009.
View 7 Replies View RelatedI am in need of creating a solid drawing from my wireframe drawing in model space. I have never done any 3d modeling in autocad before it took me a few days just to get the wireframe of a staircase done! I have tried to render this object in viewport but it disappears after I click on it or move around, therefore I cannot see it in my paper layout. How do I make a rendered object stay? Also I want to plot this on 22x34in and 11x17in paper, how would I go about getting a high quality rendered image. I am using autocad 2010.
View 4 Replies View RelatedIs there a way to fade down the drawing limits and grid in the model space. I now have Autocad 2011 and I previously had 2009.
View 2 Replies View Relatedhow can i rotate a drawing view in model space and paper space? UCS -> new -> 3 point -> and saving the view works, but trying to figure out how to do this with paper space now. My purpose if for pulling construction lines from plans, for elevations. In the past I simply rotated the drawing, but if i had a layer turned off it would mess up their positioning.
View 1 Replies View RelatedSince updating a drawing last week and saving it in paper space, I can no longer get back into model space without the drawing crashing.
how I can get back into model space and do some work?
I'm looking for a way to hide a layer in model space, but show it on ONLY my paperspace tab. Problem is, most of my work is in model space (different aspect of this drawing), and although I could pull the objects through to the paperspace tab, it just wouldn't be the way I feel it should be (3d objects should stay in model space imo). However, for the most part I don't need to see it in model space (except for checking 3d elevations of line segments), the finish product is a printed 2d top view.
View 5 Replies View Related
