I have received a drawing that is only showing in the first layout tab on a contractor's template. The drawing is in a viewport of course. The drawing does not show in the model space.
1. Is it possible to send a drawing only in the Layout tab?
2. Is it possible for me to do something to view the drawing in model space and how is it done?
3. Could it simply be a compatibility issue between the contractor's.
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View Relatedhow to get a drawing from model space onto the layout space. I know it's simple but I can't remember how!
View 9 Replies View RelatedI have three drawings in modelspace and three viewports in one layout (paperspace), I would like to select each modelspace drawing and assign it to each layout viewport.I'm using Visual Studio 2012, .NET Framework 3.5 and Csharp.
View 4 Replies View RelatedI've tried doing a block that automatically updates the X and Y coordinates from its moveable leader. I can get it to work in model space or paper space. But my problem is I want it to work in PS, but update with the MS coordinates through the viewport.
I can get it to update, by LISP, by picking a point and passing the points to the blocks attributes. At the moment I have a LISP when actioned it locks the viewports, activates the viewport, and asks you to select a point. Once selected it de-activates the viewport (going back into layout tab) then asks which block you want to update. Where you now select the block and it updates the coordinates. I.e. manually pick the point in MS, switch to PS and then manually pick the block. Then I have to manually modify the leader to the correct location.
I'm hoping that I can (In PS) move the end of the leader to snap to a position in MS and the coord updates to reflect the correct MS coordinates. I'm thinking that maybe this can't be done automatically and that I maybe can move the leader but I'm not sure how I can do it without running a LISP to update the block?
I'd be happy moving the leader then just running a single command and the leader coordinates updating without having to select the points and the block again.
I've attached the block showing the auto update of the attributes (fields).
how do I transfer model space drawing into paper space ?
View 2 Replies View RelatedVB code to do the EXPORTLAYOUT command? I need to create a batch program to do a large number of files from the layout to the model space. The program can either copy the layout to the modelspace and save or copy the layout to a new file. Either way is fine. These are old MDT files that we are moving into the Vault, but Vault doesn't like them and the drafters are using AutoCAD in modelspace to revise them.
View 4 Replies View RelatedI have a file dwg with a drawing (drawing of the customer) in space model and space paper I have several layuot (5). How I can save or export that file only contained in model space (customer drawing) and one layout of the 5? For example space + layout model No. 3 ...
View 1 Replies View RelatedI am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies View RelatedIs it possible to count blocks in either the model space or in each layout? Would be very useful for fire alarm design, cause authorities require exact counts of devices.
View 9 Replies View RelatedI have another question: My lineweights are shown in model space but not in layout. When I print/plot the line weights are missing.
How do I show the line weights in layout so it prints right?
I am using AutoCAD 2011 for Mac.
Paper space was just introduced the last time I used AutoCAD professionally. I didn't become familiar with it and it seemed like an unfathomable concept then; at least from the way it was explained to me.
So I did some drawing for this guy all in paper space...that was what first opened up in AutoCAD. After five hours and getting ready to send the files, I realize that maybe I should a done it in model space. Is it really going to make that much of a difference? If he wanted me to redo it in model space .
I have a question about exporting layouts into the model space coordinate system. I have a lot of drawings created from view frame and sheet set manager.
Each drawing has its own layout and it needs to be exported into model space. But when I export the layout it places the drawing into 0,0 in model space.
Is there any way to have it placed at the drawings coordinate system, assuming its in CA-VF (California State Plane Zone V, US foot) ?
Can it also be rotated, including title block, if the the viewport has a rotation (if the north arrow is not pointing up)?
We need to export the dwg's into dgn's. Our client uses Microstation v7 and all drawings need to be in that format.
I know v7 is old but what are you going to do.
I have AutoCAD 2013 and usially use in my work dynamic blocks with wipeout, e.g. valves, pumps and others.
So, few days ago I found that I cannot export my drawing from layout to model space. Everything is exported except wipeouts.
Is it something about new Autodesk politics or what? AutoCAD 2010 still works fine with the same drawing.
Examle.dwg is attached.
I am having an issue with my template that I created from an old drawing: the quick view layout thumbnail still shows the old drawing in model space. All of the paper space thumbnails update themselves as I work, however model space does not. It shows the old drawing both when I hover over the model space tab, and also when I pull up all of my quick view layouts. I am using AutoCAD 2009
View 4 Replies View RelatedI have a big drawing and some Mtext from a text layer just disapeared from model space. If i switch to a Layout the text is visible in the layout view and I can select it in a floating viewport, but when I switch back to model again I do not see it.
I added new text in model where missing and now in the Layout I have duplicates, the old one and the new one.
If i try to copy/paste the missing text from a previous version of the drawing, the text just doesn't paste, is not visible.
I have a drawing I am working on regardless of whether I use DVIEW Twist or UCS rotate I encounter the same issue. I start with MTEXT that is parallel to my intended view. However, as soon as I make it annotative and set it to Match Layout the text rotates 90-degrees and is no longer plan readable.The text lives in model space, not paper space. I've even roated the layout viewports in this specific drawing to match, and the text appears correct when viewed through a viewport, but when I jump back to model it is turned on end 90-degrees again! Have I missed a setting somewhere? Shouldnt the text reamin oriented with current view in model space?
I am uploading a link to a video which shows this problem in detail. URL...
Is it possible to have model space geometry print through a watermark in the layout? My watermark consists of mtext with an arial font placed manually in the layout. It is on it's own layer which is set to print at Shade 40 (plot style tables). Draworder works with other layout objects but not the geometry from the model space viewport. My watermark covers the model space geometry so it is not visible when printed. Is this possible?
View 1 Replies View RelatedI am having difficulty with the text in my drawings. When writing dtext or dimensions on my drawings in modelspace the text appears rough/rugged in both model space and layout space. I am using True Type (Arial) as the font. I've read older posts where people have suggested checking in Properties that the text is really laying down at 0 in the Z plane which it is. Some say using True Type is the problem, but just last week I was doing what seemed to be the same operation and I had no problems at all.
View 7 Replies View RelatedI have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
I just recently started using AutoCAD again after using Inventor for several months, and I'm having a very difficult time with annotations. I'd like to annotate the proper way, and I believe that's from withing layout space. I have several small weld details that simply need to be laid out on this drawing. They're all drawn to 1:1 scale, and I'd like to use Viewports to scale them up or down as appropriate.
How to properly annotate dimensions, text, and weld details such that they will all appear of uniform size among all details, but will be associative with respect to the geometry of each detail? This is quite simple in Inventor simply because of how it's designed to work, but AutoCAD works very differently and I'm very unfamiliar with how to work with text styles and dimstyles and weld-symbol styles in this manner. I can't get my annotation styles to work right.
I am having problems moving my drawing from the layout tab to the model tab.
Copy and paste is not working.
Is there another way to move the drawing?
I have attached the file that I am working with.
Chestofdrawers1.dwg
I've set up an 8.5 x11paper space layout in one file and would now like to transfer it into another drawing file.
What is the best way of doing this?
When I go from model tab to layout 1 the drawing does not transfer over. I have went on youtube and looked and even watch the instructor video. Everyone's just transfers right over. mine does not.
View 9 Replies View RelatedI have a 3D drawing in model space which I want to print with different views. I know how to make viewports for top orthographic view, side, front and 3D perspective view, but I can't figure out how to make a sectional view viewport from the 3D drawing as well.
Also, I can't figure out how to have autocad place hidden lines and centerlines for me.
1.how to differentiate the one drawing in model space using mm and the other one using cm, other one is using m?
2. am confused to know how to configure the units setting, and if someone set mm or cm in modal space does the auto-CAD detect the respective unit setting? e.g. one is using mm and he/she offset 1 unit, say mm, and suddenly i want to change the one unit offset to be m or cm, how does it work?
3. if some one has drawn in m, and i want copy and paste in new MS but i want continuing using different units say mm how does it work?
i'm working on a drawing started by someone else. They do everything in model space...no paperspace and no viewports. drawing and border are both in model space. I'm not used to just model space.
How do i set the scale of the drawing in model space? do i need to use different size borders to get the correct scale? I'm drawing everything 1:1 and i need my final prints to be on 11x17 paper.
on a previous drawingi see that they used a scale of 1/16"=1' but how they determined this scale. going thru other sheets in the setd of drawings it seems that they used different border sizes (but all are printed on 11x17 paper)...some are printed not to scale if they have no set scale...like details.
example of what i need to do:
I need to show a building rooftop plan view (the entire rooftop) on one sheet. on the next sheet i need to zoom into a portion of the rooftop.
normally i would use viewports to do this. but in model space i dont see how this is done. do i need to have a set of different size borders? but how then can i print them on 11x17 without using "scale to fit"?
acad C3D 2011
I have to add dimensions to an architectural drawing in model space
The file is drawn in decimal units (1unit=1meter)
Now I have been asked to ad dimensions in feet and inches to the drawing in order to make it usable to UK
I know that the solution is to use alternate units with Architectural units format, but how mach is the multiplier that I have to use?
I have no experience in British metric system.
So I left the multiplier 25.4 as AutoCAD prompt.
2.81 meters equals to 5'-11 1/4” ?
I’m using AutoCAD 2007
is there any point when you set up a new drawing in setting the drawing limits.
For example I am about to draw up a house plan at scale 1:100 which will be plotted on an A3 sheet. I envisage the floor plans will be on one A3 and the Elevations will be on another A3 sheet. Sections will go on another A3. I will have approx 6 paper sheets set up for this.
I plan to draw the whole lot in model space. Then move it around in paper space so each item is on a seperate sheet.
Is this the correct way to do it. If it is, then what is the point of having drawing limits in Model space? The books I have, say it is good drafting practice to set up limits. But I can't see why Also what is the point of setting up the grid display when half the time you draw right off the grid?
I'm having a problem with Zoom Extent on a poticular drawing. when zooming normally with the scroll wheel it will work with no problems at all.
When I do a Zoom Extents everything in the Model window disapears even the viewcube and small tool bar and minimize and close buttons. but if i go to where the minimzie and close is and click my mouse picks up the command.
If i do a undo i get everything back.
Before Zoom Extents
before ZE.jpg
After Zoom Extents
blank window.jpg
Would this be a system varible or a driver issue. it only seems to do it with this drawing and when this drawing is Xref'ed into another drawing.
I have purged, audit and checked scales. but i'm still getting this problem.
I have started to use Selection Set Manager for drawing previewing and publishing. I was moving drawings that are one to one to paper space to allow SSM usage but I recently found that my client does not want me moving drawings to paper space. He wants to keep his drawings in model space for one to one drawings (electrical schematics, one lines etc).
How can I use SSM for these model space drawings?
