AutoCad :: How To Add Dimensions To Architectural Drawing In Model Space
Feb 22, 2007
I have to add dimensions to an architectural drawing in model space
The file is drawn in decimal units (1unit=1meter)
Now I have been asked to ad dimensions in feet and inches to the drawing in order to make it usable to UK
I know that the solution is to use alternate units with Architectural units format, but how mach is the multiplier that I have to use?
I have no experience in British metric system.
So I left the multiplier 25.4 as AutoCAD prompt.
2.81 meters equals to 5'-11 1/4” ?
I’m using AutoCAD 2007
View 9 Replies
ADVERTISEMENT
Sep 14, 2011
The layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies
View Related
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
Nov 12, 2012
We are debating an issue here where I work. I work in the following way, once my drawing is all done and I've created my viewports, I lock it and do all my dimensionning annotive and in model space by passing thru my view port, my co worker him, he works with view ports also but does his dimensioning on the paper space layout and not in annotative.
Dimensions in model space or dimensions on the paper space? While I got your attention what is your opinion on annotative dimensioning?
View 9 Replies
View Related
Sep 22, 2011
I'm using autocad 2007:
I draw a detail 1 in model space and put dimensions on it say at a overall scale of 1.00, now I draw a detail 2 and change the overall scale to 5.00 and put dimensions on that detail but when I look at detail 1 all my dimension have changed to the 5.00 scale. Where I'm changing the scale is under the tab Format/Dim. Style/Modify/Fit/use overall scale of ..... How can I keep the dimensions from changing when I change the scale this way? I know it can be done because I've work on several dwgs. and changing the overall scale doesn't change on every detail in the model space.
View 8 Replies
View Related
Feb 20, 2012
I offen't have head the discussion about where to put the dimensions model or paper space?
I always say the best place to put the dimension is the model space especially when you now have the annotation scale to control it.
View 9 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Oct 4, 2013
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies
View Related
Apr 30, 2012
I am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies
View Related
Jan 25, 2011
how to get a drawing from model space onto the layout space. I know it's simple but I can't remember how!
View 9 Replies
View Related
Jun 21, 2011
Paper space was just introduced the last time I used AutoCAD professionally. I didn't become familiar with it and it seemed like an unfathomable concept then; at least from the way it was explained to me.
So I did some drawing for this guy all in paper space...that was what first opened up in AutoCAD. After five hours and getting ready to send the files, I realize that maybe I should a done it in model space. Is it really going to make that much of a difference? If he wanted me to redo it in model space .
View 9 Replies
View Related
Feb 10, 2012
i am haveing trouble with a viewport that is hiding everything that crosses the rectangular border. The viewport is acting just like a wipeout would. I got this drawing from a client and I can't figure out what is wrong with it. I checked to see if there was actually a frame with the viewport but when I select the viewport it only reads as one object.
View 6 Replies
View Related
Jul 2, 2012
How to import Inventor file 2D(.idw) to autocad 2D (model space) with dimensions, axes, sections, ... ?
Inventor 2013 & Autocad Mechanical 2013
View 6 Replies
View Related
Jun 27, 2012
I use parametric base-model which automatically generates drawing (look "Pic1"). I change parameters I need and new drawing is generated (scale stays the same). However, dimensions on new drawing are displayed in random way (look "Pic2"). Is there a way (iLogic, VBA or smth els) to fix/link dimensins so - that they could stay in an appropriate way (space between dimensions, space between dimension and edge, dimension is centered on line with arrows) when the model size is changed (in this example I have changed the base diameter from 830 to 1280)?
Function "Arrange dimension" does not solve the problem!
View 1 Replies
View Related
Jul 30, 2009
Apparently I can't edit model dimensions from a drawing because i did not select this option when i installed inventor 2010.
View 9 Replies
View Related
Apr 20, 2012
I have received a drawing that is only showing in the first layout tab on a contractor's template. The drawing is in a viewport of course. The drawing does not show in the model space.
1. Is it possible to send a drawing only in the Layout tab?
2. Is it possible for me to do something to view the drawing in model space and how is it done?
3. Could it simply be a compatibility issue between the contractor's.
View 2 Replies
View Related
Jun 3, 2013
1.how to differentiate the one drawing in model space using mm and the other one using cm, other one is using m?
2. am confused to know how to configure the units setting, and if someone set mm or cm in modal space does the auto-CAD detect the respective unit setting? e.g. one is using mm and he/she offset 1 unit, say mm, and suddenly i want to change the one unit offset to be m or cm, how does it work?
3. if some one has drawn in m, and i want copy and paste in new MS but i want continuing using different units say mm how does it work?
View 3 Replies
View Related
Mar 2, 2012
Is it possible to use the Measure.ExtentsLength in a drawing to get model dimensions?
What I am trying to do is get the overall dimensions of the model and place them in a sketch block in the drawings so our machinist can easily reference the stock material. I can't figure out how to get the overall model dimensions.
Windows 7 x64 -24 GB Ram
Intel i7-3840QM @ 2.8GHz
nVidia Quadro K5000M - 4GB
Inv 2013 SP2
Vault Collaboration 2013 Update1
View 3 Replies
View Related
Jul 2, 2013
I have a automated ilogic model that is then used within a 2D drawing, this 2D drawing then has dimensions on it referenced to the the model.
This model changes in its length the dimension associated with its length then changes but the dimension text then goes outside of the dimension boundary (does not stay central). Is there any code that can scan the dimensions and in effect tidy them up?
View 3 Replies
View Related
Dec 19, 2012
i'm working on a drawing started by someone else. They do everything in model space...no paperspace and no viewports. drawing and border are both in model space. I'm not used to just model space.
How do i set the scale of the drawing in model space? do i need to use different size borders to get the correct scale? I'm drawing everything 1:1 and i need my final prints to be on 11x17 paper.
on a previous drawingi see that they used a scale of 1/16"=1' but how they determined this scale. going thru other sheets in the setd of drawings it seems that they used different border sizes (but all are printed on 11x17 paper)...some are printed not to scale if they have no set scale...like details.
example of what i need to do:
I need to show a building rooftop plan view (the entire rooftop) on one sheet. on the next sheet i need to zoom into a portion of the rooftop.
normally i would use viewports to do this. but in model space i dont see how this is done. do i need to have a set of different size borders? but how then can i print them on 11x17 without using "scale to fit"?
acad C3D 2011
View 9 Replies
View Related
Oct 17, 2006
is there any point when you set up a new drawing in setting the drawing limits.
For example I am about to draw up a house plan at scale 1:100 which will be plotted on an A3 sheet. I envisage the floor plans will be on one A3 and the Elevations will be on another A3 sheet. Sections will go on another A3. I will have approx 6 paper sheets set up for this.
I plan to draw the whole lot in model space. Then move it around in paper space so each item is on a seperate sheet.
Is this the correct way to do it. If it is, then what is the point of having drawing limits in Model space? The books I have, say it is good drafting practice to set up limits. But I can't see why Also what is the point of setting up the grid display when half the time you draw right off the grid?
View 9 Replies
View Related
Feb 15, 2012
I'm having a problem with Zoom Extent on a poticular drawing. when zooming normally with the scroll wheel it will work with no problems at all.
When I do a Zoom Extents everything in the Model window disapears even the viewcube and small tool bar and minimize and close buttons. but if i go to where the minimzie and close is and click my mouse picks up the command.
If i do a undo i get everything back.
Before Zoom Extents
before ZE.jpg
After Zoom Extents
blank window.jpg
Would this be a system varible or a driver issue. it only seems to do it with this drawing and when this drawing is Xref'ed into another drawing.
I have purged, audit and checked scales. but i'm still getting this problem.
View 9 Replies
View Related
Jul 7, 2013
I have started to use Selection Set Manager for drawing previewing and publishing. I was moving drawings that are one to one to paper space to allow SSM usage but I recently found that my client does not want me moving drawings to paper space. He wants to keep his drawings in model space for one to one drawings (electrical schematics, one lines etc).
How can I use SSM for these model space drawings?
View 1 Replies
View Related
Jul 22, 2011
I'm trying to get a drawing flipped round in model space so it fits more neatly in a viewport. I need to rotate the model space by about 45 degrees so that a line that looked about 45 degree slope up from left to right becomes a flat line.
I've been trying to use 'ucs' in the command line and then type the degree rotation as this is what it says in the help section but it doesnt do what i want. It asks for an origin point on the x-axis and then i dont know what this means.
View 9 Replies
View Related
Dec 29, 2012
I am new to Autocad, Everything was working fine until now...I can access a command via command line or menu or toolbar just fine, but although the command line prompts are working, the model space is not showing my lines, circles, rectangles etc. Nothing new is appearing on my model space. I am not sure what I accidentally changed. This is only true in this particular file, my other files are working fine.
View 1 Replies
View Related
Jan 5, 2013
I have a drawing that is shwing model space empty, nothing in it, however on paper space the drawing is there. I can double click my viewport and able to use my drawing commands as normal. what has happened how come i cant see my drawing in model space, like it is hidden, i have tried regen, redraw etc.
View 6 Replies
View Related
Aug 2, 2011
I am trying to dimension a 1/8" drawing (in model space) and the text height on the dimensions is so small it is not even readable. I have tried modifying the dimstyle to have an "Overall Scale" of 96 (under 'Fit') and a "Scale Factor" of 1 (under 'Primary Units') and vice versa, but neither is working. I have never had this problem before. I am working in AutoCAD Architecture 2010. Also, when i try to dimension this in paper space, the size comes out ok but it is saying a 6' line is 576'... I would rather dimension in model space anyway but what's up with this? I realize 6 times 96 is 576 but how do you get it to be the right length in paper space?
View 9 Replies
View Related
Nov 7, 2012
Everytime I open ACAD2013 and start from the "drawing1" position, model space is unworkably small, we are talking mm here.
How do I ensure that upon opening I have a workable sized model space ?
View 5 Replies
View Related
Mar 25, 2013
We have just loaded AutoCAD 2013 from previously using Version 2012, and I am experiencing a very distubing phenomenon. While manipulating the commands in any vieport window in Model Space, the program automatically 'jumps' into Paper Space causing an interruption in work-flow, and losing any command which was in progress during the time. For example, if a number of objects were copied with the intention of placing them elsewhere within the same or another paper space window in 'model space' , the program would jump to paper space and the items would be lost, with the necessity of selecting them all over again. This can happen several times in a row.
View 9 Replies
View Related
Mar 12, 2009
I'm trying to plot a lot of drawing files that are in model space. We use to do this with batch plot. Is there still a way to do this in 2009.
View 7 Replies
View Related
Jul 19, 2013
I am in need of creating a solid drawing from my wireframe drawing in model space. I have never done any 3d modeling in autocad before it took me a few days just to get the wireframe of a staircase done! I have tried to render this object in viewport but it disappears after I click on it or move around, therefore I cannot see it in my paper layout. How do I make a rendered object stay? Also I want to plot this on 22x34in and 11x17in paper, how would I go about getting a high quality rendered image. I am using autocad 2010.
View 4 Replies
View Related
