i am haveing trouble with a viewport that is hiding everything that crosses the rectangular border. The viewport is acting just like a wipeout would. I got this drawing from a client and I can't figure out what is wrong with it. I checked to see if there was actually a frame with the viewport but when I select the viewport it only reads as one object.
View 6 RepliesI use IN MODEL SPACE command:
view/ viewports/ two viewports (horizontal or vertical)
just ordinary split window in model space.
I found out that is missing line between viewports. I am looking in options but there is nothing.
Which command or system variable it is???
Is it possible to have model space geometry print through a watermark in the layout? My watermark consists of mtext with an arial font placed manually in the layout. It is on it's own layer which is set to print at Shade 40 (plot style tables). Draworder works with other layout objects but not the geometry from the model space viewport. My watermark covers the model space geometry so it is not visible when printed. Is this possible?
View 1 Replies View RelatedIs there any way to copy a viewport that includes model space and paper space at the same time to another drawing?
View 5 Replies View RelatedWhat is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedIm working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedI then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
We are debating an issue here where I work. I work in the following way, once my drawing is all done and I've created my viewports, I lock it and do all my dimensionning annotive and in model space by passing thru my view port, my co worker him, he works with view ports also but does his dimensioning on the paper space layout and not in annotative.
Dimensions in model space or dimensions on the paper space? While I got your attention what is your opinion on annotative dimensioning?
I was wondering if there was a way to see and adjust paperspace viewports in modelspace. By adjusting viewports in modelspace I would like to be able to adjust the size of my rectangular viewport in modelspace to encompass what I want, while keeping the viewport on paperspace the same size (to encompass the entire print page). I would like my modelspace viewport to simply adjust the zoom in and zoom out of my paperspace viewport.
Any better method than individually zooming in and zooming out and re-adjusting my paperspace viewport.
I'm using autocad 2007:
I draw a detail 1 in model space and put dimensions on it say at a overall scale of 1.00, now I draw a detail 2 and change the overall scale to 5.00 and put dimensions on that detail but when I look at detail 1 all my dimension have changed to the 5.00 scale. Where I'm changing the scale is under the tab Format/Dim. Style/Modify/Fit/use overall scale of ..... How can I keep the dimensions from changing when I change the scale this way? I know it can be done because I've work on several dwgs. and changing the overall scale doesn't change on every detail in the model space.
I offen't have head the discussion about where to put the dimensions model or paper space?
I always say the best place to put the dimension is the model space especially when you now have the annotation scale to control it.
I am running the antique CAD 2004 and went to layouts to start setting up a page. When I drew in the view port, it does not show anything of the model space, zero, zip, nada. Tried "Scale to fit", a new view port with no luck. I opened another project file, it work perfectly, just not this one. It doesn't have any Xref's that I can see, but it does have some proxy objects.
View 3 Replies View RelatedMEP 2013
Are there any commands other than DVIEW that allow you to rotate your model space ONLY in the active viewport?
I have to add dimensions to an architectural drawing in model space
The file is drawn in decimal units (1unit=1meter)
Now I have been asked to ad dimensions in feet and inches to the drawing in order to make it usable to UK
I know that the solution is to use alternate units with Architectural units format, but how mach is the multiplier that I have to use?
I have no experience in British metric system.
So I left the multiplier 25.4 as AutoCAD prompt.
2.81 meters equals to 5'-11 1/4” ?
I’m using AutoCAD 2007
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
I cannot get my dashed lines in my model space to show up dashed in my viewport.
I already tried MSLTSCALE = 1 in model space and PSLTSCALE = 1 and LTSCALE = 1 in paperspace.
it did not work.
I am working on a set of architectural drawings, and so far I got about 12 sheets (each sheet is on a paper space layout) of details. I am using AutoCad 2005LT. The text is in paper space and all the drawings in model space. I have to move some details from one layout to another. When I copy the viewport with text to different layout the items in model space don't show off . Is there a way to copy text in paper space along with detail in model space at the same time to a different layout?
View 6 Replies View Relateddetermine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
So I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.
What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.
I have three drawings in modelspace and three viewports in one layout (paperspace), I would like to select each modelspace drawing and assign it to each layout viewport.I'm using Visual Studio 2012, .NET Framework 3.5 and Csharp.
View 4 Replies View RelatedHow to import Inventor file 2D(.idw) to autocad 2D (model space) with dimensions, axes, sections, ... ?
Inventor 2013 & Autocad Mechanical 2013
We like to allow user to select a rectagular area in modal scpace. Then the code creates a paperscace viewport in a spcified layout. The viewport will show the selected area. find the old VBA code that achived this and the .net code I am trying with. .Net code always gives some exception.
VBA Code
'Lets find the center of the viewport in paperspace.
Dim center(0 To 2) As Double
center(0) = newWidth / 2
center(1) = newLength / 2
center(2) = 0
Dim lay As AcadLayout
For Each ent In ThisDrawing.layouts
[code].....
Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies View RelatedI've been runing LT 2013 for the past couple of months, everything was working fine until recently. Occasionally a viewport will go completely black. I can doule-click into model space and select objects, though I can't really see them. If I delete the viewport and make a new one, the new one works fine (at least for now).
View 4 Replies View RelatedI'm having a very annoying problem where the color and lineweight of my alignment in a viewport is not what it's set to be. I have an alignment with a style that sets all the linework components to a layer named C-STRM-CNTR-N, the color is set to BYLAYER, the linetype set to Continuous, and lineweight set to .80mm (see style_and_layer_screenshots.png). The layer C-STRM-CNTR-N has Cyan as the color, which shows in the Alignment Style dialog box (see style_and_layer_screenshots.png). In the model space everything looks fine (see c3d_model_space_screenshot.png). But in my layout, the alignment is a different color and lineweight (see c3d_layout_screenshot.png).
At first I thought maybe the alignment wasn't on the correct layer, but I checked and it's set correctly. Then I checked to see if the layer C-STRM-CNTR-N had a different color set for the viewport through the layer manager, but it's set to Cyan just like it's supposed to be. I went to the model space and noticed the color is correct. Frustrated and at a loss, I closed C3D, then reopened it and the problem is still there.
Why I can't change the lineweight nor the color of the alignment in this viewport? If I change either of those two settings in the Alignment Style Dialog box nothing changes, but the linetype does change.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
Why is it that some dimensions in a viewport are out of sync with the rest of the dimensions? Eg. a correct dimension is 240, but the next time you dimension the same distance, you get 24 as a dimension figure?
Also, in a long run of continued dimensions one or two of the dimensions is out of scale? I have tried making all dimension Annotative, same dimstyle, etc.
I think sometimes Autocad forgets that it is in a viewport, so some dimensions are correct to the viewport scale while others are to the limits of the paper size?
I had the need on occasion to dimension in Paper Space. I set up a "Dim Style" to accomplish this in either 1/8" or 1/4" Scale. The problem I am having is the consistency of the actual dimension.
For example: I could draw a simple box 10'x2'. When I dimension in Paper Space, sometimes it correctly displays the dimensions and sometimes it incorrectly displays the dimension.
I attached 2 screen shots of what is happening. Notice the dimension on top of the box shows 10', but when I dimensioned the bottom of the box it shows 480'. This seems to work at random.
The other screen shot shows the Dim Style settings I used.
When dimensioning in paper space and move or make any adjustment to the viewports the dimensions go haywire and move of the parts but not all dimension and not all viewports are doing this. I'm using the same dimension style and templates that I normally use.
View 2 Replies View RelatedWhen working in paperspace existing or new layout viewports are non-selectable. The viewport boundary is not visible and all layers are turned on and thawed. Is there some sort of toggle to make viewport boundarys visible and selectable?
View 6 Replies View RelatedDimensions show when viewport style is set to 2d wire frame, but only show when they are draged outside the viewport frame when it is set to 3D hidden. Policy is no diemensions in modle space. So how do I show dimensions in paper space with the viewport style set to 3D hidden?
View 3 Replies View Related