I cannot get my dashed lines in my model space to show up dashed in my viewport.
I already tried MSLTSCALE = 1 in model space and PSLTSCALE = 1 and LTSCALE = 1 in paperspace.
it did not work.
I am running the antique CAD 2004 and went to layouts to start setting up a page. When I drew in the view port, it does not show anything of the model space, zero, zip, nada. Tried "Scale to fit", a new view port with no luck. I opened another project file, it work perfectly, just not this one. It doesn't have any Xref's that I can see, but it does have some proxy objects.
View 3 Replies View RelatedWe like to allow user to select a rectagular area in modal scpace. Then the code creates a paperscace viewport in a spcified layout. The viewport will show the selected area. find the old VBA code that achived this and the .net code I am trying with. .Net code always gives some exception.
VBA Code
'Lets find the center of the viewport in paperspace.
Dim center(0 To 2) As Double
center(0) = newWidth / 2
center(1) = newLength / 2
center(2) = 0
Dim lay As AcadLayout
For Each ent In ThisDrawing.layouts
[code].....
All lines in model space appear thicker when I zoom in.
how to change this behaviour so they show the same weight thin in the computer window?
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
If Inventor 2010 has the capability of showing certain parts/sub-assemblies in phantom style lines on the idw/dwg file?
I have a box unit, where I want to show the base, but with the posts meeting it in phantom. Then when I do the drawing for the posts, I want the base and roof in phantom. Then when I do the roof drawing, I want the posts in phantom again.
I can't change the BOM level as it will apply to every level of detail. when suppressed, they completely vanish. Is there a way to do it rather than find the parts in the browser (whilst in the drawing) and change the properties (over-riding them)?
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedI'm working on a plan that contains an xref with some elements that are not visible in paper space at my chosen scale. The xref is an annotated structural grid. It is entirely visible in model space, but in paper space only the grid is visible, annotations such as dimensions and section cut indicators are not. Strangely, or maybe not, when I change the scale in paper space, these elements appear.
Other presentation tabs exist, created by other people, that use a different scale and those presentations properly display. The annotations are blocks in the xref document, and I wonder if those blocks could somehow be set to only display at a certain scale. I don't see any such options in the block editor. Although, I have added to this document, I did not create it, nor the xref or the blocks.
I was wondering if there was a way to see and adjust paperspace viewports in modelspace. By adjusting viewports in modelspace I would like to be able to adjust the size of my rectangular viewport in modelspace to encompass what I want, while keeping the viewport on paperspace the same size (to encompass the entire print page). I would like my modelspace viewport to simply adjust the zoom in and zoom out of my paperspace viewport.
Any better method than individually zooming in and zooming out and re-adjusting my paperspace viewport.
slice tool. when i'm slicing something the dotted lines wont show while dragging/resizing, and i dont know why they just disappered.
View 7 Replies View RelatedMEP 2013
Are there any commands other than DVIEW that allow you to rotate your model space ONLY in the active viewport?
i am haveing trouble with a viewport that is hiding everything that crosses the rectangular border. The viewport is acting just like a wipeout would. I got this drawing from a client and I can't figure out what is wrong with it. I checked to see if there was actually a frame with the viewport but when I select the viewport it only reads as one object.
View 6 Replies View RelatedI am working on a set of architectural drawings, and so far I got about 12 sheets (each sheet is on a paper space layout) of details. I am using AutoCad 2005LT. The text is in paper space and all the drawings in model space. I have to move some details from one layout to another. When I copy the viewport with text to different layout the items in model space don't show off . Is there a way to copy text in paper space along with detail in model space at the same time to a different layout?
View 6 Replies View RelatedI have got a large drawing with multiple viewports and some layers that are shown in model space won't show when I access model space from paper space (through the viewport). I have had a look at the layer manager through the viewport and everything is switched on, there is no viewport freeze activated but still I can't see the lines in the viewport in paper space (either in model or paperthrough the template).
View 8 Replies View RelatedI have three drawings in modelspace and three viewports in one layout (paperspace), I would like to select each modelspace drawing and assign it to each layout viewport.I'm using Visual Studio 2012, .NET Framework 3.5 and Csharp.
View 4 Replies View RelatedI use IN MODEL SPACE command:
view/ viewports/ two viewports (horizontal or vertical)
just ordinary split window in model space.
I found out that is missing line between viewports. I am looking in options but there is nothing.
Which command or system variable it is???
Is it possible to have model space geometry print through a watermark in the layout? My watermark consists of mtext with an arial font placed manually in the layout. It is on it's own layer which is set to print at Shade 40 (plot style tables). Draworder works with other layout objects but not the geometry from the model space viewport. My watermark covers the model space geometry so it is not visible when printed. Is this possible?
View 1 Replies View RelatedI've been runing LT 2013 for the past couple of months, everything was working fine until recently. Occasionally a viewport will go completely black. I can doule-click into model space and select objects, though I can't really see them. If I delete the viewport and make a new one, the new one works fine (at least for now).
View 4 Replies View RelatedI'm having a very annoying problem where the color and lineweight of my alignment in a viewport is not what it's set to be. I have an alignment with a style that sets all the linework components to a layer named C-STRM-CNTR-N, the color is set to BYLAYER, the linetype set to Continuous, and lineweight set to .80mm (see style_and_layer_screenshots.png). The layer C-STRM-CNTR-N has Cyan as the color, which shows in the Alignment Style dialog box (see style_and_layer_screenshots.png). In the model space everything looks fine (see c3d_model_space_screenshot.png). But in my layout, the alignment is a different color and lineweight (see c3d_layout_screenshot.png).
At first I thought maybe the alignment wasn't on the correct layer, but I checked and it's set correctly. Then I checked to see if the layer C-STRM-CNTR-N had a different color set for the viewport through the layer manager, but it's set to Cyan just like it's supposed to be. I went to the model space and noticed the color is correct. Frustrated and at a loss, I closed C3D, then reopened it and the problem is still there.
Why I can't change the lineweight nor the color of the alignment in this viewport? If I change either of those two settings in the Alignment Style Dialog box nothing changes, but the linetype does change.
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
Is there any way to copy a viewport that includes model space and paper space at the same time to another drawing?
View 5 Replies View RelatedThere must be a way to get the line weight to show in model space. It shows up as specified in print preview and printed, but not on the screen. Is there a setting for this?
View 6 Replies View RelatedI've been using AutoCAD for a while now, started with 2011 and now I'm using 2012. However, the one issue I've never been able to resolve is how to get my linetypes to show in model space properly, and then how to get them to show the same way in paperspace.
I know it has something to do with, at least, LTSCALE and PSLTSCALE. I've never know the 'formula' to make those work - it takes a lot of trial and error before they work together. Is there a trick to just making all of this work, without changing scales and regenerating countless times?
The current drawing I'm working with; I'm drawing in 1:1, with my viewports set to 1:100. My LTSCALE is 500, and my PSLTSCALE is set to 0. That seems to make things 'work' but, I can't figure out how to always just make these values work.
I should add I've checked the forums for a 'magic' answer and, there doesn't seem to be one. Is this the way it really is? I thought AutoCAD would be a little more intuitive than just 'trial and error until it works'.
is PS 7 able to do dotted lines and circles? If I create a selection (circle or rectangle) can it render dotted lines?
View 2 Replies View RelatedI'm looking for a way to hide a layer in model space, but show it on ONLY my paperspace tab. Problem is, most of my work is in model space (different aspect of this drawing), and although I could pull the objects through to the paperspace tab, it just wouldn't be the way I feel it should be (3d objects should stay in model space imo). However, for the most part I don't need to see it in model space (except for checking 3d elevations of line segments), the finish product is a printed 2d top view.
View 5 Replies View RelatedI'm using AC 2011LT on a PC Every time I print to PDF or printer a line appears which is not visible on the model or paper space. It is even not visible when I preview the print before printing (again from model or paper). And on different layouts the line moves and sometimes doubles.
I have done all the regular things - all layers on, all unfrozen, all visible, etc, I've purged, regened, made a save as file, gone to another persons computer but still the same problem.
I have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies View RelatedLet’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
I just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies View RelatedI am using AutoCAD 2011 for a school project. It's pretty basic work--just making 2D architectural plots with imperial annotation units. I'm having two problems.
1) My school computers only have the "educational version" of the program installed, and it only has a continuous line. I need a dotted line for some parts of the project. Is there someplace where I could download the appropriate .lin file and add it to the program?
2) I have figured out how to change the program into the "Architectural" units mode, but when I make dimension lines the measurements say, for instance, 2.5 instead of 2'6". How can I change this from the former to the latter?