AutoCad :: Unable To Show Lineweight In Model Space

Nov 10, 2011

There must be a way to get the line weight to show in model space. It shows up as specified in print preview and printed, but not on the screen. Is there a setting for this?

View 6 Replies


ADVERTISEMENT

AutoCAD Architecture :: Dimensions Show On Model Space Not On Work Space

Apr 5, 2013

Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.

View 2 Replies View Related

AutoCad :: Elements In Model Space Don't Show Up In Paper Space

Aug 21, 2011

I'm working on a plan that contains an xref with some elements that are not visible in paper space at my chosen scale. The xref is an annotated structural grid. It is entirely visible in model space, but in paper space only the grid is visible, annotations such as dimensions and section cut indicators are not. Strangely, or maybe not, when I change the scale in paper space, these elements appear.

Other presentation tabs exist, created by other people, that use a different scale and those presentations properly display. The annotations are blocks in the xref document, and I wonder if those blocks could somehow be set to only display at a certain scale. I don't see any such options in the block editor. Although, I have added to this document, I did not create it, nor the xref or the blocks.

View 2 Replies View Related

AutoCAD LT :: Heavy Lines Show In Model Space?

Jan 16, 2013

All lines in model space appear thicker when I zoom in.

how to change this behaviour so they show the same weight thin in the computer window?

View 3 Replies View Related

AutoCad :: Viewport Doesn't Show Model Space

Apr 17, 2013

I am running the antique CAD 2004 and went to layouts to start setting up a page. When I drew in the view port, it does not show anything of the model space, zero, zip, nada. Tried "Scale to fit", a new view port with no luck. I opened another project file, it work perfectly, just not this one. It doesn't have any Xref's that I can see, but it does have some proxy objects.

View 3 Replies View Related

AutoCad :: Getting Dotted Lines To Show Up From Model Space Into Viewport

Jul 18, 2011

I cannot get my dashed lines in my model space to show up dashed in my viewport.

I already tried MSLTSCALE = 1 in model space and PSLTSCALE = 1 and LTSCALE = 1 in paperspace.

it did not work.

View 9 Replies View Related

AutoCad :: How To Always Ensure Linetypes Show Same In Model And Paper Space

Nov 27, 2011

I've been using AutoCAD for a while now, started with 2011 and now I'm using 2012. However, the one issue I've never been able to resolve is how to get my linetypes to show in model space properly, and then how to get them to show the same way in paperspace.

I know it has something to do with, at least, LTSCALE and PSLTSCALE. I've never know the 'formula' to make those work - it takes a lot of trial and error before they work together. Is there a trick to just making all of this work, without changing scales and regenerating countless times?

The current drawing I'm working with; I'm drawing in 1:1, with my viewports set to 1:100. My LTSCALE is 500, and my PSLTSCALE is set to 0. That seems to make things 'work' but, I can't figure out how to always just make these values work.

I should add I've checked the forums for a 'magic' answer and, there doesn't seem to be one. Is this the way it really is? I thought AutoCAD would be a little more intuitive than just 'trial and error until it works'.

View 1 Replies View Related

AutoCAD 2010 :: Hide A Layer In Model Space But Show It On Paperspace Tab

Mar 15, 2012

I'm looking for a way to hide a layer in model space, but show it on ONLY my paperspace tab.  Problem is, most of my work is in model space (different aspect of this drawing), and although I could pull the objects through to the paperspace tab, it just wouldn't be the way I feel it should be (3d objects should stay in model space imo).  However, for the most part I don't need to see it in model space (except for checking 3d elevations of line segments), the finish product is a printed 2d top view.

View 5 Replies View Related

AutoCAD .NET :: Create Paper Space Viewport And Show Some Model Portion In View

Nov 11, 2012

We like to allow user to select a rectagular area in modal scpace. Then the code creates a paperscace viewport in a spcified layout. The viewport will show the selected area. find the old VBA code that achived this and the .net code I am trying with. .Net code always gives some exception.

VBA Code

 'Lets find the center of the viewport in paperspace.

    Dim center(0 To 2) As Double
    center(0) = newWidth / 2
    center(1) = newLength / 2
    center(2) = 0
    Dim lay As AcadLayout
    For Each ent In ThisDrawing.layouts

[code].....

View 2 Replies View Related

AutoCAD Map 3D :: Model Space - Unable To Adjust View Scale

Jan 5, 2012

When I go to model space I am unable to adjust the view scale. Although I can get to the prompt for a new scale value, the program will not accept my changes. Is this locked somehow?

View 6 Replies View Related

AutoCAD Inventor :: Unable To Show Dual Dimensions In Model Sketch?

Jan 9, 2013

Unable to find a way to show dual dimensions in my model shetch.

View 8 Replies View Related

AutoCad :: How To See Lineweight Effect In Paper Space

Feb 12, 2011

I think that line weight controls line thickness in plot.

If I want to see the result in paper pace, what shall I do?

View 8 Replies View Related

AutoCAD LT :: Model Space Screen Darkens And Unable To See Screen?

Nov 10, 2011

Model Space Screen Darkens and am unable to see screen

View 2 Replies View Related

AutoCad 2D :: Quick Object Properties Didn't Show Lineweight

Aug 22, 2013

How to expand the Quick Properties Tool? show that it will show lineweight and more stuff (See Pic), some drawing that i work with Quick properties show more features, but this drawing doesn't.

QOJ.JPG

View 5 Replies View Related

AutoCad :: Unable To Adjust Lineweight

Aug 2, 2013

I have a few objects on a layer (Circles and Lines).

I am trying to make them "Thicker". I have tried adjusting the layers "Lineweight" as well as individually selecting them and adjusting the lineweight but neither is working for me.

View 2 Replies View Related

AutoCAD 2010 :: Changing Between Model Space To Paper Space Locks Application

Apr 12, 2013

In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.

In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.

I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.

I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.

View 9 Replies View Related

AutoCAD 2013 :: Toggle From Paper Space Into Same Zoomed Area Within Model Space

Oct 5, 2013

Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.

View 3 Replies View Related

AutoCAD Civil 3D :: Dynamic Blocks Showing In Model Space But NOT In Paper Space

Mar 22, 2012

I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.

View 9 Replies View Related

AutoCAD 2013 :: Transfer Model Space Drawing Into Paper Space?

Feb 15, 2013

how do I transfer model space drawing into paper space ?

View 2 Replies View Related

AutoCAD Dynamic Blocks :: X Y Coordinates From Model Space On Paper Space?

Nov 5, 2013

I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).

However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?

Or is it a case of having to use a more LISP based approach? 

View 2 Replies View Related

AutoCAD LT :: Model Space Hatch Hiding Paper Space Multileader

Dec 10, 2012

I'm running ACAD LT 2013. 

I have a solid hatch that is in model space (actually in an xref in model space).  When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden.  As if it was a layering or object arrangement issue.

View 5 Replies View Related

AutoCAD Architecture :: Copy Objects From Model Space To Paper Space?

May 19, 2011

is there a way to COPY objects from model space to paper space?  CHSPACE only "cuts" geometry.  I need the same geometry stacked in both model space and paper space.

View 1 Replies View Related

AutoCAD 2013 :: Switch Object From Model Space To Paper Space

Oct 12, 2012

I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).

View 2 Replies View Related

AutoCAD 2013 :: Paper Space Viewports - Wipeouts In Model Space

Jul 13, 2012

I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.

Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.

When I go to preview or plot it doesn't recognise any wipeouts?

View 4 Replies View Related

AutoCAD Map 3D :: How To Get From Paper Space To Model Space While Converting Scale Properly

Feb 8, 2012

I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.

I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.

Is there a way for me to achieve this?

View 6 Replies View Related

AutoCad :: Text Doesn't View In Same Model Space / Paper Space

Aug 24, 2012

ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!

This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.

View 9 Replies View Related

AutoCad :: Referencing Title Block From Model Space Into New Tab Of Paper Space

Jul 11, 2011

I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.

In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.

Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?

View 8 Replies View Related

AutoCad 2D :: Bring Paper Space Object Through Viewport Into Model Space

Jan 5, 2009

What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?

View 8 Replies View Related

AutoCad :: Copy Text From Paper Space And Paste Into Model Space

May 2, 2013

I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.

View 5 Replies View Related

AutoCad :: Locking Out Model Space While Editing Text In Paper Space

Oct 24, 2012

I use x-ref's inserted in model space and label in paper space - always.

I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.

View 9 Replies View Related

AutoCad :: Objects Are Yellow In Model Space And White On Paper Space?

Apr 4, 2012

how it works?, the objects are yellow in model space and white on paper space??

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved