AutoCAD LT :: All Dimensions In Model Space Change?
Sep 22, 2011
I'm using autocad 2007:
I draw a detail 1 in model space and put dimensions on it say at a overall scale of 1.00, now I draw a detail 2 and change the overall scale to 5.00 and put dimensions on that detail but when I look at detail 1 all my dimension have changed to the 5.00 scale. Where I'm changing the scale is under the tab Format/Dim. Style/Modify/Fit/use overall scale of ..... How can I keep the dimensions from changing when I change the scale this way? I know it can be done because I've work on several dwgs. and changing the overall scale doesn't change on every detail in the model space.
View 8 Replies
ADVERTISEMENT
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
Nov 12, 2012
We are debating an issue here where I work. I work in the following way, once my drawing is all done and I've created my viewports, I lock it and do all my dimensionning annotive and in model space by passing thru my view port, my co worker him, he works with view ports also but does his dimensioning on the paper space layout and not in annotative.
Dimensions in model space or dimensions on the paper space? While I got your attention what is your opinion on annotative dimensioning?
View 9 Replies
View Related
Feb 20, 2012
I offen't have head the discussion about where to put the dimensions model or paper space?
I always say the best place to put the dimension is the model space especially when you now have the annotation scale to control it.
View 9 Replies
View Related
Feb 22, 2007
I have to add dimensions to an architectural drawing in model space
The file is drawn in decimal units (1unit=1meter)
Now I have been asked to ad dimensions in feet and inches to the drawing in order to make it usable to UK
I know that the solution is to use alternate units with Architectural units format, but how mach is the multiplier that I have to use?
I have no experience in British metric system.
So I left the multiplier 25.4 as AutoCAD prompt.
2.81 meters equals to 5'-11 1/4” ?
I’m using AutoCAD 2007
View 9 Replies
View Related
Feb 10, 2012
i am haveing trouble with a viewport that is hiding everything that crosses the rectangular border. The viewport is acting just like a wipeout would. I got this drawing from a client and I can't figure out what is wrong with it. I checked to see if there was actually a frame with the viewport but when I select the viewport it only reads as one object.
View 6 Replies
View Related
Jul 2, 2012
How to import Inventor file 2D(.idw) to autocad 2D (model space) with dimensions, axes, sections, ... ?
Inventor 2013 & Autocad Mechanical 2013
View 6 Replies
View Related
Nov 17, 2011
When I use slice command in a 3D model, after separation into two parts, each part can't editable, you can only move them.
You can see in arrows on # 1 and # 2 3D model, but after using separate into it two parts by slice command , these arrows are disappeared.
How can I see arrows again to change dimensions of 3D model easily?
I hope that you can understand what I mean. [URL]....
View 8 Replies
View Related
Jun 21, 2012
I just tried to assemble my model and realized that I should make the dimension of the door 0.06" larger in order to become closed! It took me a week to complete this model, so I don't wanna redraw everything! How can I modify my model in CAD?
View 9 Replies
View Related
Jul 30, 2013
Any way to change that background in which we create models. Someone said that Autodesk knows better than the users so we have a choice between drab grey and depressing grey.
I am using AC 2014 and I still cannot find a way to change that background.
View 4 Replies
View Related
Jul 12, 2013
I mean the dimensions in sketches in a model part, not the drawing dimensions which are controlled by styles .
View 1 Replies
View Related
Nov 1, 2006
How I would change both the model and paper space thickness of a line in AutoCAD 2004? I've tried changing "line thickness" and "line weight" in the properties dialog box but it doesn't seem to matter whether it's 0 or 9,999,999 or any number, it just looks the same, in both the model space and paper space views.
I have a drawing someone else did that uses polylines of different thickness so I have tried to figure out how they did it. Again, looking at the properties dialog box it seems to make no difference what I set the "line thickness" or "line weight" properties to...the line just stays the same size regardless.
I want to change line thicknesses because I'm designing a surface water pipe layout...I want the pipes to be a lot thicker than the lines that represent the actual building so that they will stand out when I plot the drawing.
View 9 Replies
View Related
May 23, 2011
Can I change the LTSCALE in paper space and in model space interchangeably?
I am struggling with the batt insulation big time. I get it looking perfect in paper space and then I go to model space and move a piece of batt insulation and then when I go back to paper space the LTSCALE of the batt insulation has changed. It's really weird. Batt insulation is killing me. I set the LTSCALE globally as well as each individual batt insulation but it keeps changing without me messign with the LTSCALE. Killing... Me...
View 9 Replies
View Related
Apr 28, 2009
How can I change the white background of the model space to the old black one?
View 9 Replies
View Related
Feb 23, 2012
Is there a way to quickly change all text font in model space in autocad electrical 2009 rather than doing it manually for every text block?
View 6 Replies
View Related
Mar 15, 2012
I would like to change the color behind the "2D MODEL SPACE" uniform background, too light. Type Config, go to Display tab and then Color, in the Drawing Windows Colors dialog box.
View 9 Replies
View Related
Sep 2, 2011
My company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
View 5 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Oct 5, 2013
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies
View Related
Mar 22, 2012
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Nov 5, 2013
I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
View 2 Replies
View Related
Dec 10, 2012
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
View 5 Replies
View Related
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Oct 12, 2012
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies
View Related
Jul 13, 2012
I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
View 4 Replies
View Related
Feb 8, 2012
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
View 6 Replies
View Related
Aug 24, 2012
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies
View Related
Jul 11, 2011
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
View 8 Replies
View Related
Jan 5, 2009
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies
View Related
May 2, 2013
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies
View Related
