AutoCAD 2010 :: Change White Background Of Model Space To Old Black One?
Apr 28, 2009How can I change the white background of the model space to the old black one?
View 9 Replies
ADVERTISEMENT
AutoCAD 2010 :: Change Background To Black Instead Of White?
Apr 26, 2012How do I change the background to black instead of white?
And how do I drag the toolbars to the sides (vertically) instead of the top of my screen (horizontally)?
AutoCAD 2010 :: Change Color Behind 2D MODEL SPACE Uniform Background Too Light
Mar 15, 2012I would like to change the color behind the "2D MODEL SPACE" uniform background, too light. Type Config, go to Display tab and then Color, in the Drawing Windows Colors dialog box.
View 9 Replies View RelatedAutoCad :: Who Uses Black For Model Space Background
Jul 15, 2013i use white, the same as PS. Never understood why use black, especially as it encourages the use of yellow to draw geometry....so do most ppl use black?
View 9 Replies View RelatedAutoCAD 2010 :: Paper Space In Black / White Mode?
May 7, 2013In paper space, some of my drawings lose color palette showing only black and white, some others not. How can I change the settings make all drawings looking unanimous in colors?
View 4 Replies View RelatedAutoCad 2D :: How To Change The Background In Model Space
Jul 30, 2013Any way to change that background in which we create models. Someone said that Autodesk knows better than the users so we have a choice between drab grey and depressing grey.
I am using AC 2014 and I still cannot find a way to change that background.
AutoCAD Architecture :: Change Background Color In Block Editor From White To Black?
Oct 11, 2011Is it possible to change the background color in Block editor from white to black?
View 2 Replies View RelatedXara :: Change Black Background Screen With White Writing To Gray With Black Writing
Feb 22, 2014I have just purchased this upgrade software having used XARA Xtreme4.0 for many years.How can I change the black background screen with white writing to grey with black writing?
View 9 Replies View RelatedAutoCad :: Objects Are Yellow In Model Space And White On Paper Space?
Apr 4, 2012how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View RelatedAutoCAD 2010 :: Changing Between Model Space To Paper Space Locks Application
Apr 12, 2013In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
AutoCad :: Create 3D Drawing With White Background - White Surfaces And Black Lines Only
Sep 23, 2012I would like to draw parts in 3d view which look very basic, i.e. out of a book.
Example:
white block with black lines so you can see it is 3d.background should also be white.
How do i set autocad (2012/2013) to do this. I would like the model space to be the same and not just for printing.
AutoCAD 2010 :: Fields In Model Space To Paper Space?
May 2, 2012determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
AutoCAD 2010 :: Model Space / Paper Space Display
Mar 15, 2012I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
AutoCAD 2010 :: Multileaders In Paper Space But Want In Model Space?
Mar 13, 2012So I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.
What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.
AutoCAD 2010 :: Rotate 3D Model In Model Space?
Apr 13, 2012Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies View RelatedAutoCAD LT :: Model Space Is White (Set On Slate)
Jul 18, 2012I quit a file opened up a new one and the model space is white. I looked under my preferences to see if the background got changed to white but it is still set on slate. I cannot see anything. When I go to open the file the small preview shows it correctly on a slate background, but then when I open it, I cannot see it. It is all white. I tried shutting down, restart and opening other files.
View 9 Replies View RelatedPhotoshop :: How To Cut Image From White Background And Place On Black Background
Aug 24, 2011I seem to be having problems when I lasso round a specific part of a photo taken with a white background and then try to add that part of the image to a plain #000000 black background.
I always seem to get a white outline around the image when I place it on the black background, even when its on ZERO feathered. I don't like using feathered as it adds a smudge round the outside of the image.
AutoCAD LT :: Viewport Turns Black / Can Enter Model Space And Select Plots Correctly
Sep 12, 2012I've been runing LT 2013 for the past couple of months, everything was working fine until recently. Occasionally a viewport will go completely black. I can doule-click into model space and select objects, though I can't really see them. If I delete the viewport and make a new one, the new one works fine (at least for now).
View 4 Replies View RelatedPhotoshop :: Change Solid White To Transparent In Black To White Gradient In One Layer Of PSD File
Jul 19, 2013I have a multilayered psd file. All layers should remain opaque except the black to white gradient layer where I need the white to be transparent. So that when I place the final psd on top of a block of solid colour in Indesign the gradient shows the background colour through where the black fades off.
View 4 Replies View RelatedPhotoshop :: CS6 - Black And White From Model
Dec 22, 2012if it is possible with Photoshop CS6 to generate a black and white from a model (not a preset)I work up a photo color that I am satisfied with the result, I would like to apply the curve of gray image (which is not a simple conversion tool with nb) or histogram to another image or a series images.
View 9 Replies View RelatedAutoCad :: Changing Color Of Background From Black To White?
Jun 27, 2012I just finsihed setting up this new computer. I reloaded AC 2012 LT. I need to reset my settings. I do not rmember how to change that black background to white.
View 3 Replies View RelatedAutoCAD LT :: All Dimensions In Model Space Change?
Sep 22, 2011I'm using autocad 2007:
I draw a detail 1 in model space and put dimensions on it say at a overall scale of 1.00, now I draw a detail 2 and change the overall scale to 5.00 and put dimensions on that detail but when I look at detail 1 all my dimension have changed to the 5.00 scale. Where I'm changing the scale is under the tab Format/Dim. Style/Modify/Fit/use overall scale of ..... How can I keep the dimensions from changing when I change the scale this way? I know it can be done because I've work on several dwgs. and changing the overall scale doesn't change on every detail in the model space.
AutoCAD 2010 :: Model Space Glitch
Aug 6, 2012I have a file thats doing something wierd, when I open it I can see the layouts just fine, the existing viewports show linework from model space. However, when I switch to the model space tab I don't see anything, my mouse cursor dissapears when I move it over the drawing area but reapears when its moved over the ribbon or the prospector/command prompt. Also, when I create a new layout with a new viewport, nothing is displayed in the new viewport. It's like the program cant regen the view? When I went into one of the existing viewports and zoomed out I could see all the linework in model space but when I switch to the model tab it won't show any linework or the UCS indicator or my mouse cursor!?!
View 8 Replies View RelatedPhotoshop :: CS6 To Generate A Black And White From Model
Dec 22, 2012Is it possible with Photoshop CS6 to generate a black and white from a model (not a preset)
I work up a photo color that I am satisfied with the result, I would like to apply the curve of gray image (which is not a simple conversion tool with nb) or histogram to another image or a series images.
AutoCAD Visual LISP / AutoLISP :: Changing Color Of Background In Model Space
Jan 2, 2014Any routine for changing color of AutoCAD background in model space. As for changing background color we have to follow four steps namely as follows:-
1. Execute OP
2. Go to display tab
3. Go to color tab
4. Change color
A tool that directly calls the model color shall be highly beneficial.
AutoCAD 2010 :: Set Model Space Dimscale In Paperspace?
Mar 19, 2013I dont use paper space at all. i mostly work in model. but i just want to explore the paper space side.
I have my lpaperspace dimscale set at 1
In the model space my picture is drawn to scale, so its like 12 feet tall.
when i put the viewport in and get the picture positioned in the viewport, when i dimension the model in the viewport my dims are set according to the paperspace dimscale.
is there a way i set the dimscale in the viewport at a different dimsale then the dimscale set in the paperspace without having to set the dimscale in the model space?
AutoCAD 2010 :: Multiple Layouts In Model Space
Nov 26, 2013Multiple layouts in model space suddenly stopped showing boundaries.
View 1 Replies View RelatedAutoCAD 2010 :: Rotating Views In Model Space
Oct 8, 2012I have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies View RelatedAutoCAD 2010 :: Multileader In Paper Or Model Space?
Nov 9, 2013in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
AutoCAD 2010 :: Model Versus Paper Space
Aug 16, 2012I received a drawing form a vendor that is in 3d (27 meg)...this drawing contains the model and 4 paper space sheets.
These sheets contain different pieces of the 3d model. I need to create four 2d drawings (one for each sheet). I have tried "export layout to model" with no luck as most of the drawing does not export. I have tried to copy to clipboard but, drawing is too large for the clipboard. I have looked in the "help" and there seems to be nothing on converting a 3d drawing to a 2d drawing or extracting indivigual sheets to a 2d format model. I have tried exploding the information on the sheets in order to get everything to export but that doesn"t work.
AutoCAD 2010 :: 0,0 Paperspace Versus Model Space
Aug 22, 2012Suddenly, this week, Paperspace no longer has a 0,0.
For decades I've inserted my Titleblocks in Paperspace at 0,0.
This week, it inserts it relative to 0,0 in Modelspace in one of the Viewports.
Which means the Titleblock is "Waaay Offf" to quote Rodney Dangerfield.
If I draw a line in Paperspace and start it at 0,0, again, it's the Modelspace 0,0 in a Viewport.
Was this an improvement that I didn't know of?Or did I accidentally change some setting?