VB code to do the EXPORTLAYOUT command? I need to create a batch program to do a large number of files from the layout to the model space. The program can either copy the layout to the modelspace and save or copy the layout to a new file. Either way is fine. These are old MDT files that we are moving into the Vault, but Vault doesn't like them and the drafters are using AutoCAD in modelspace to revise them.
View 4 Replies
I have a file dwg with a drawing (drawing of the customer) in space model and space paper I have several layuot (5). How I can save or export that file only contained in model space (customer drawing) and one layout of the 5? For example space + layout model No. 3 ...
View 1 Replies View RelatedI have a question about exporting layouts into the model space coordinate system. I have a lot of drawings created from view frame and sheet set manager.
Each drawing has its own layout and it needs to be exported into model space. But when I export the layout it places the drawing into 0,0 in model space.
Is there any way to have it placed at the drawings coordinate system, assuming its in CA-VF (California State Plane Zone V, US foot) ?
Can it also be rotated, including title block, if the the viewport has a rotation (if the north arrow is not pointing up)?
We need to export the dwg's into dgn's. Our client uses Microstation v7 and all drawings need to be in that format.
I know v7 is old but what are you going to do.
I have AutoCAD 2013 and usially use in my work dynamic blocks with wipeout, e.g. valves, pumps and others.
So, few days ago I found that I cannot export my drawing from layout to model space. Everything is exported except wipeouts.
Is it something about new Autodesk politics or what? AutoCAD 2010 still works fine with the same drawing.
Examle.dwg is attached.
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedI've tried doing a block that automatically updates the X and Y coordinates from its moveable leader. I can get it to work in model space or paper space. But my problem is I want it to work in PS, but update with the MS coordinates through the viewport.
I can get it to update, by LISP, by picking a point and passing the points to the blocks attributes. At the moment I have a LISP when actioned it locks the viewports, activates the viewport, and asks you to select a point. Once selected it de-activates the viewport (going back into layout tab) then asks which block you want to update. Where you now select the block and it updates the coordinates. I.e. manually pick the point in MS, switch to PS and then manually pick the block. Then I have to manually modify the leader to the correct location.
I'm hoping that I can (In PS) move the end of the leader to snap to a position in MS and the coord updates to reflect the correct MS coordinates. I'm thinking that maybe this can't be done automatically and that I maybe can move the leader but I'm not sure how I can do it without running a LISP to update the block?
I'd be happy moving the leader then just running a single command and the leader coordinates updating without having to select the points and the block again.
I've attached the block showing the auto update of the attributes (fields).
how to get a drawing from model space onto the layout space. I know it's simple but I can't remember how!
View 9 Replies View RelatedI have received a drawing that is only showing in the first layout tab on a contractor's template. The drawing is in a viewport of course. The drawing does not show in the model space.
1. Is it possible to send a drawing only in the Layout tab?
2. Is it possible for me to do something to view the drawing in model space and how is it done?
3. Could it simply be a compatibility issue between the contractor's.
Is it possible to count blocks in either the model space or in each layout? Would be very useful for fire alarm design, cause authorities require exact counts of devices.
View 9 Replies View RelatedI have another question: My lineweights are shown in model space but not in layout. When I print/plot the line weights are missing.
How do I show the line weights in layout so it prints right?
I am using AutoCAD 2011 for Mac.
I am having an issue with my template that I created from an old drawing: the quick view layout thumbnail still shows the old drawing in model space. All of the paper space thumbnails update themselves as I work, however model space does not. It shows the old drawing both when I hover over the model space tab, and also when I pull up all of my quick view layouts. I am using AutoCAD 2009
View 4 Replies View RelatedI have three drawings in modelspace and three viewports in one layout (paperspace), I would like to select each modelspace drawing and assign it to each layout viewport.I'm using Visual Studio 2012, .NET Framework 3.5 and Csharp.
View 4 Replies View RelatedI have a big drawing and some Mtext from a text layer just disapeared from model space. If i switch to a Layout the text is visible in the layout view and I can select it in a floating viewport, but when I switch back to model again I do not see it.
I added new text in model where missing and now in the Layout I have duplicates, the old one and the new one.
If i try to copy/paste the missing text from a previous version of the drawing, the text just doesn't paste, is not visible.
I have a drawing I am working on regardless of whether I use DVIEW Twist or UCS rotate I encounter the same issue. I start with MTEXT that is parallel to my intended view. However, as soon as I make it annotative and set it to Match Layout the text rotates 90-degrees and is no longer plan readable.The text lives in model space, not paper space. I've even roated the layout viewports in this specific drawing to match, and the text appears correct when viewed through a viewport, but when I jump back to model it is turned on end 90-degrees again! Have I missed a setting somewhere? Shouldnt the text reamin oriented with current view in model space?
I am uploading a link to a video which shows this problem in detail. URL...
I want to use "export Layout" using API.
Also tried via send command, but no use.
Is it possible to have model space geometry print through a watermark in the layout? My watermark consists of mtext with an arial font placed manually in the layout. It is on it's own layer which is set to print at Shade 40 (plot style tables). Draworder works with other layout objects but not the geometry from the model space viewport. My watermark covers the model space geometry so it is not visible when printed. Is this possible?
View 1 Replies View RelatedI am having difficulty with the text in my drawings. When writing dtext or dimensions on my drawings in modelspace the text appears rough/rugged in both model space and layout space. I am using True Type (Arial) as the font. I've read older posts where people have suggested checking in Properties that the text is really laying down at 0 in the Z plane which it is. Some say using True Type is the problem, but just last week I was doing what seemed to be the same operation and I had no problems at all.
View 7 Replies View RelatedI have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
i downloaded the trial version of 2k9, on a win xp machine, with the main interest in trying out this new feature...unfortunately i have yet been successfull in using it as autocad either locks-up durring the export or end up with an "unhandled exeption...eDegenerateGeometry"...
i'm also attaching the details of such an exception (and i probably should report this to autodesk for their investigations)...
I am using File>Export Layout to Model... command.
The drawing exported in half scale means a circle with 10mm diameter dimension on it exported as a circle with 5mm diameter But the dimension on the circle remains as 10mm!!!
How does this happen and how can I fix it?
I need to export a layout to a new model -as a new drawing-. I did ths after bind all the X-ref files and explode them all then with "Export layout to new model" command from the right click menu on Layout tab. But the file is slightly big, the file has more than about 105 layout , the AutoCAD gets hang and after about 10-15 mins it shows a dialogue box contents"Unhandelled exception has occurred in a component in your application. If you click continue the application will ignore this and attempt to continue" I clicked on "Continue" and a file has been created with 0 bites.And that file cannot be opened.
View 8 Replies View RelatedI'm trying to export layouts to model space. Everything is fine except that I have items grouped in in the original drawing that are not in the new drawing. I don't want to change all the groups to blocks.
I,m using LT 2012
Is there a way within Autocad to lock a layer so that only certain people have access (say using a password).
Also is there a way to export model space from one workbook to another. In that one is the standard company file and I want to build a sepearte workbook for my purposes (making specific paper spaces etc...) but I want to use their model space for the model space of my workbook. Also if possible to export would this exported model space make changes when changes were made on the original copy?
Is there a way within Autocad to lock a layer so that only certain people have access (say using a password).
Also is there a way to export model space from one workbook to another. In that one is the standard company file and I want to build a sepearte workbook for my purposes (making specific paper spaces etc...) but I want to use their model space for the model space of my workbook. Also if possible to export would this exported model space make changes when changes were made on the original copy?
I'm currently working on a project that requires modelling in revit but exporting the final drawings in Autocad format. As a requirement from my client, I am demanded to export the entire paper space into the model space as Autocad entities.
When I export the drawing, the composition that I model in Revit is shown in the paper space, Is there a way to automatically export this composition into the model space?
I'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
