Revit :: Export Drawings To Model Space When Exporting To Autocad Entities
Feb 28, 2014
I'm currently working on a project that requires modelling in revit but exporting the final drawings in Autocad format. As a requirement from my client, I am demanded to export the entire paper space into the model space as Autocad entities.
When I export the drawing, the composition that I model in Revit is shown in the paper space, Is there a way to automatically export this composition into the model space?
View 4 Replies
ADVERTISEMENT
Jul 9, 2013
I have code that will set and sae a current UCS to the front of an entity, of course, depending on the viewpoint. This is so, because we need all draft lines in front of 3D solids, such as dimensions, leaders for labels, text entities and so on (the reason for not putting these entities in paper space is another discussion ).
But I'll have on of two problems on numerous occasions:
1. The user forgets all together to run the command.
2. The user will pick the wrong entity that is in the foremost position in that view.
The code I have utilizes the following:
(setq ent (car (entsel)))
(vl-load-com)
(setq obj (vlax-ename->vla-object ent))
(vla-getboundingbox obj 'LowerCorner 'UpperCorner)
(setq LowerC (vlax-safearray->list LowerCorner))
(setq UpperC (vlax-safearray->list UpperCorner))
Then I'll analyze the X, Y and Z of both the lower and upper corners, and set my UCS to whatever is proper.
Is there a "LowerCorner" and an "UpperCorner" for all entities. I can't see "VSMIN" and VSMAX" working because the elevation of the returned coordinates is always "0,0"
View 4 Replies
View Related
Oct 6, 2013
Q1: can you scale your drawings on Model Space?? if so, what command should i type?
Q2: can you scale different drawings (different scale) on Model space?
View 8 Replies
View Related
Jun 18, 2012
I was working in model space and when I hit zoom extents, I lost all of my drawings in model space. They must be there because I can see them in layout, but I am not able to locate them in model. For some reason my cross hairs and the ability to draft have disappeared too. I am sure I must have hit a setting that needs to be changed back.
View 3 Replies
View Related
Nov 1, 2013
I recently joined a firm that has been working drawings up in meters in model space
The issue comes that when i go to input a scale at the viewport stage the drawing is tiny. Ive always worked in mm and thus never had this issue when using the standard 'z' enter 's' enter 1/##xp' to achieve the desired scale
i would like to understand how i can still work these drawings without scaling everything up in model space at a factor of 1000, which is the only way i can think of getting round this issue.
View 9 Replies
View Related
Jan 23, 2012
I'm trying to export layouts to model space. Everything is fine except that I have items grouped in in the original drawing that are not in the new drawing. I don't want to change all the groups to blocks.
I,m using LT 2012
View 9 Replies
View Related
Nov 7, 2013
VB code to do the EXPORTLAYOUT command? I need to create a batch program to do a large number of files from the layout to the model space. The program can either copy the layout to the modelspace and save or copy the layout to a new file. Either way is fine. These are old MDT files that we are moving into the Vault, but Vault doesn't like them and the drafters are using AutoCAD in modelspace to revise them.
View 4 Replies
View Related
Apr 24, 2013
Is there a way within Autocad to lock a layer so that only certain people have access (say using a password).
Also is there a way to export model space from one workbook to another. In that one is the standard company file and I want to build a sepearte workbook for my purposes (making specific paper spaces etc...) but I want to use their model space for the model space of my workbook. Also if possible to export would this exported model space make changes when changes were made on the original copy?
View 5 Replies
View Related
Jan 18, 2013
I have a file dwg with a drawing (drawing of the customer) in space model and space paper I have several layuot (5). How I can save or export that file only contained in model space (customer drawing) and one layout of the 5? For example space + layout model No. 3 ...
View 1 Replies
View Related
Nov 23, 2012
I have a question about exporting layouts into the model space coordinate system. I have a lot of drawings created from view frame and sheet set manager.
Each drawing has its own layout and it needs to be exported into model space. But when I export the layout it places the drawing into 0,0 in model space.
Is there any way to have it placed at the drawings coordinate system, assuming its in CA-VF (California State Plane Zone V, US foot) ?
Can it also be rotated, including title block, if the the viewport has a rotation (if the north arrow is not pointing up)?
We need to export the dwg's into dgn's. Our client uses Microstation v7 and all drawings need to be in that format.
I know v7 is old but what are you going to do.
View 9 Replies
View Related
Mar 31, 2013
I have AutoCAD 2013 and usially use in my work dynamic blocks with wipeout, e.g. valves, pumps and others.
So, few days ago I found that I cannot export my drawing from layout to model space. Everything is exported except wipeouts.
Is it something about new Autodesk politics or what? AutoCAD 2010 still works fine with the same drawing.
Examle.dwg is attached.
View 1 Replies
View Related
Apr 24, 2013
Is there a way within Autocad to lock a layer so that only certain people have access (say using a password).
Also is there a way to export model space from one workbook to another. In that one is the standard company file and I want to build a sepearte workbook for my purposes (making specific paper spaces etc...) but I want to use their model space for the model space of my workbook. Also if possible to export would this exported model space make changes when changes were made on the original copy?
View 8 Replies
View Related
Apr 3, 2012
I have a multiple storey building that has been created in Revit 2012. The client would like a separate Revit model that only contains the information on one floor (Level 4), so that he can give this separate model to his tenant, to be used to do a renovation.
View 1 Replies
View Related
Jun 22, 2006
Has anyone had any luck exporting a Revit 3D model directly to Acrobat 3D? I can't seem to get it to work.I can export to AutoCAD and then to Acrobat 3D, but I lose all embedded Revit information.
View 2 Replies
View Related
Aug 28, 2013
A customer is trying to export a model for use in Revit. When he goes to the Environments tab -> BIM Exchange and the dialog opens... He has no option for RFA files... Only ADSK. Not sure what is going on.
View 3 Replies
View Related
Oct 12, 2011
How to export a 3D model from Revit 2012 into 3D Max for rendering?
View 3 Replies
View Related
Jan 6, 2014
My firm is starting a project....the Structural side is going to be don in Revit 3d and our Mechanical side uses Autocad w/Cadworxs for our 3d package. Is it possible to export the Revit steel drawing and import that model into Autocad as an xref?
View 1 Replies
View Related
Mar 1, 2014
I already have a revit model of a building with the areas identified like "room A", "room B", etc. I exported it to FBX and opened with Unity but the information about the rooms was not there (I am assuming FBX format does not save that information)
I might be wrong but I beleive IFC format saves this information. The problem is that Unity does not import IFC files and the file seems way too complicated to make my own parser to read it. I was wondering if there is a lib or something that I could use to visualize the 3D model without losing the rooms identification.
View 1 Replies
View Related
Jan 17, 2014
How do you extract an Export to DWG setup .txt file from a Revit project model?
View 3 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Oct 5, 2013
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies
View Related
Mar 22, 2012
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Nov 5, 2013
I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
View 2 Replies
View Related
Dec 10, 2012
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
View 5 Replies
View Related
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Oct 12, 2012
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies
View Related
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
Jul 13, 2012
I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
View 4 Replies
View Related
Feb 8, 2012
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
View 6 Replies
View Related
Aug 24, 2012
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies
View Related
