AutoCad :: Drawings In Meters In Model Space - Print Scale
Nov 1, 2013
I recently joined a firm that has been working drawings up in meters in model space
The issue comes that when i go to input a scale at the viewport stage the drawing is tiny. Ive always worked in mm and thus never had this issue when using the standard 'z' enter 's' enter 1/##xp' to achieve the desired scale
i would like to understand how i can still work these drawings without scaling everything up in model space at a factor of 1000, which is the only way i can think of getting round this issue.
View 9 Replies
ADVERTISEMENT
Oct 6, 2013
Q1: can you scale your drawings on Model Space?? if so, what command should i type?
Q2: can you scale different drawings (different scale) on Model space?
View 8 Replies
View Related
Feb 8, 2012
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
View 6 Replies
View Related
Feb 3, 2012
I have an issue with linetype scale. I have a certain part of my drawing with dash lines at a linetype scale of 1000. In Model space it is fine but when I change to Paper Space the lines become solid. I have tried increasing the linetype scale in Model space to compensate for the scale in Paper space but the lines are still solid.
View 7 Replies
View Related
Aug 3, 2013
How to make the drawings on scale on paper space.
View 2 Replies
View Related
Jun 18, 2012
I was working in model space and when I hit zoom extents, I lost all of my drawings in model space. They must be there because I can see them in layout, but I am not able to locate them in model. For some reason my cross hairs and the ability to draft have disappeared too. I am sure I must have hit a setting that needs to be changed back.
View 3 Replies
View Related
Sep 23, 2012
I am trying to draw a floor plan, that has one side 90' long. When I change the units to Architectual>inches, and then enter 90' as my line length, the line becomes way too long to fit on the screen. This is clearly some sort of a scaling issue.
View 9 Replies
View Related
Mar 19, 2013
I have an old dwg that was scaled 1:500 in model space. I want to make it 1 to 1 in model space, then change it to a different scale in the layout. So in model space, do I just click on Scale then type in 500 and therefore my object should be 1:1?
View 9 Replies
View Related
Apr 9, 2013
I have a drawing with the model space set at 3/16" scale. I've never worked like this before (I obviously always scale in layout space). However, I need to get this drawing back to normal scale so I can work on it.
How to use the scale factor on this to get model space from 3/16" to 1:1.
View 9 Replies
View Related
Feb 28, 2014
I'm currently working on a project that requires modelling in revit but exporting the final drawings in Autocad format. As a requirement from my client, I am demanded to export the entire paper space into the model space as Autocad entities.
When I export the drawing, the composition that I model in Revit is shown in the paper space, Is there a way to automatically export this composition into the model space?
View 4 Replies
View Related
May 29, 2013
AutoCAD to draw various drawings, my issue to set scale.
1. what are the procedures of setting scale in modal space? say if is 1:1 then how to make 1:2 or how to recognize if someone has set a scale say 1:20 in modal space so that you return it to 1:1?....( here i need the procedures)
2. what is different among the following, one using mm, another using cm and the third one using m when drawing in modal space, do these people face different if they decide to use the same scale in layout to print? say if they us 1:50xp, what will happen, in their output.
View 2 Replies
View Related
Mar 1, 2012
SUBJECT: Annotative Scales.
I have a drawing with a 2 viewing ports
Port 1 is at 1/4"= 1'-0"
Port 2 is at 1/2"= 1'-0"
What should my Annotative setting be in model Space?
View 9 Replies
View Related
Jan 5, 2012
When I go to model space I am unable to adjust the view scale. Although I can get to the prompt for a new scale value, the program will not accept my changes. Is this locked somehow?
View 6 Replies
View Related
Feb 23, 2012
I'm using 2004lt- I have current .dwg in modelspace and set up to plot in PS@ 3/23"-1'-0". I'd like to create a second set of PS tabs to plot portions at 1/4"-1'-0" on the same border when needed.
In its a single viewport in MS and PS the current scale is 1:1 but if i change it to 1/4"-1',etc the plot preview appears wrong
View 1 Replies
View Related
Mar 14, 2013
How to set-up the drawing so I don't have to change the ltscale between model space and paper space in order to get dashed lines to read? What is the ideal global scale factor for an architectural drawing in model space?
View 9 Replies
View Related
Jan 8, 2013
how to scale out these drawings. I have a CAD drawing using metric scale. This drawing has multiple title blocks. and each title block has its own scale. 1:500, 1:50, 1:150, 1:75. Now I make a block out of each title block and scale them out to find out if they plot out on the same sheet, and they do. Now, I still can't find out the scale factor to print them out to scale. I tried using using the scale shown in for each drawing for example 1:500 and it is super small when I do a print preview.
View 7 Replies
View Related
Sep 4, 2011
What is the advantage/usage of limits command? I know it specify the area where could be filled with Grid command. But is it, its only usage? What other usage could be expected from "limits"?
If we want to make the paper space and model space same (draw in same scale, if we use 1/100 scale in metric system, 1 meter in model space is equal to 1 centimeter in paper space), is it a wise idea to set the model space into A4 or A3 paper size by use of LIMITS?
I think its utmost usage is in combination with "snap". Where you can quickly grab the points you want onscreen without need for coordinate input. Would be happy if there is other usage for GRID
Before, I thought limits will specify the area in model space where I can draw (limit the area of model space). But this is in contrary with the fact that model space is limitless and I can draw as far as I want.
It is really hard to understand that there is no limit for model space like real world.
I haven't understood these issues until I read many threads in CT. Now I have got most of them but I think I need some extra study to understand them 100%.
View 9 Replies
View Related
Apr 27, 2012
Any way to print/plot a layer in a VPORT, but prevent the same layer from printing in Model Space?
I am annotating my VPORTS with text, but I don't want any of this text to print/plot from Model space. All of the annotations will be on the same layer even though the annotations will appear on multiple VPORTS.
View 4 Replies
View Related
Mar 12, 2009
I'm trying to plot a lot of drawing files that are in model space. We use to do this with batch plot. Is there still a way to do this in 2009.
View 7 Replies
View Related
May 24, 2013
I'm using AC 2011LT on a PC Every time I print to PDF or printer a line appears which is not visible on the model or paper space. It is even not visible when I preview the print before printing (again from model or paper). And on different layouts the line moves and sometimes doubles.
I have done all the regular things - all layers on, all unfrozen, all visible, etc, I've purged, regened, made a save as file, gone to another persons computer but still the same problem.
View 3 Replies
View Related
Jan 17, 2013
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
View 3 Replies
View Related
Apr 10, 2013
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
View 4 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Oct 5, 2013
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies
View Related
Mar 22, 2012
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Nov 5, 2013
I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
View 2 Replies
View Related
Dec 10, 2012
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
View 5 Replies
View Related
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Oct 12, 2012
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies
View Related
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
