I have an old dwg that was scaled 1:500 in model space. I want to make it 1 to 1 in model space, then change it to a different scale in the layout. So in model space, do I just click on Scale then type in 500 and therefore my object should be 1:1?
View 9 Replies
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
I have an issue with linetype scale. I have a certain part of my drawing with dash lines at a linetype scale of 1000. In Model space it is fine but when I change to Paper Space the lines become solid. I have tried increasing the linetype scale in Model space to compensate for the scale in Paper space but the lines are still solid.
View 7 Replies View RelatedI am trying to draw a floor plan, that has one side 90' long. When I change the units to Architectual>inches, and then enter 90' as my line length, the line becomes way too long to fit on the screen. This is clearly some sort of a scaling issue.
View 9 Replies View RelatedQ1: can you scale your drawings on Model Space?? if so, what command should i type?
Q2: can you scale different drawings (different scale) on Model space?
I have a drawing with the model space set at 3/16" scale. I've never worked like this before (I obviously always scale in layout space). However, I need to get this drawing back to normal scale so I can work on it.
How to use the scale factor on this to get model space from 3/16" to 1:1.
AutoCAD to draw various drawings, my issue to set scale.
1. what are the procedures of setting scale in modal space? say if is 1:1 then how to make 1:2 or how to recognize if someone has set a scale say 1:20 in modal space so that you return it to 1:1?....( here i need the procedures)
2. what is different among the following, one using mm, another using cm and the third one using m when drawing in modal space, do these people face different if they decide to use the same scale in layout to print? say if they us 1:50xp, what will happen, in their output.
SUBJECT: Annotative Scales.
I have a drawing with a 2 viewing ports
Port 1 is at 1/4"= 1'-0"
Port 2 is at 1/2"= 1'-0"
What should my Annotative setting be in model Space?
When I go to model space I am unable to adjust the view scale. Although I can get to the prompt for a new scale value, the program will not accept my changes. Is this locked somehow?
View 6 Replies View RelatedI'm using 2004lt- I have current .dwg in modelspace and set up to plot in PS@ 3/23"-1'-0". I'd like to create a second set of PS tabs to plot portions at 1/4"-1'-0" on the same border when needed.
In its a single viewport in MS and PS the current scale is 1:1 but if i change it to 1/4"-1',etc the plot preview appears wrong
How to set-up the drawing so I don't have to change the ltscale between model space and paper space in order to get dashed lines to read? What is the ideal global scale factor for an architectural drawing in model space?
View 9 Replies View RelatedI recently joined a firm that has been working drawings up in meters in model space
The issue comes that when i go to input a scale at the viewport stage the drawing is tiny. Ive always worked in mm and thus never had this issue when using the standard 'z' enter 's' enter 1/##xp' to achieve the desired scale
i would like to understand how i can still work these drawings without scaling everything up in model space at a factor of 1000, which is the only way i can think of getting round this issue.
how to scale out these drawings. I have a CAD drawing using metric scale. This drawing has multiple title blocks. and each title block has its own scale. 1:500, 1:50, 1:150, 1:75. Now I make a block out of each title block and scale them out to find out if they plot out on the same sheet, and they do. Now, I still can't find out the scale factor to print them out to scale. I tried using using the scale shown in for each drawing for example 1:500 and it is super small when I do a print preview.
View 7 Replies View RelatedWhat is the advantage/usage of limits command? I know it specify the area where could be filled with Grid command. But is it, its only usage? What other usage could be expected from "limits"?
If we want to make the paper space and model space same (draw in same scale, if we use 1/100 scale in metric system, 1 meter in model space is equal to 1 centimeter in paper space), is it a wise idea to set the model space into A4 or A3 paper size by use of LIMITS?
I think its utmost usage is in combination with "snap". Where you can quickly grab the points you want onscreen without need for coordinate input. Would be happy if there is other usage for GRID
Before, I thought limits will specify the area in model space where I can draw (limit the area of model space). But this is in contrary with the fact that model space is limitless and I can draw as far as I want.
It is really hard to understand that there is no limit for model space like real world.
I haven't understood these issues until I read many threads in CT. Now I have got most of them but I think I need some extra study to understand them 100%.
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedI feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedIm working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedI have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedI use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View Related
