How to set-up the drawing so I don't have to change the ltscale between model space and paper space in order to get dashed lines to read? What is the ideal global scale factor for an architectural drawing in model space?
View 9 Replies
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
I have a drawing with the model space set at 3/16" scale. I've never worked like this before (I obviously always scale in layout space). However, I need to get this drawing back to normal scale so I can work on it.
How to use the scale factor on this to get model space from 3/16" to 1:1.
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
I have an issue with linetype scale. I have a certain part of my drawing with dash lines at a linetype scale of 1000. In Model space it is fine but when I change to Paper Space the lines become solid. I have tried increasing the linetype scale in Model space to compensate for the scale in Paper space but the lines are still solid.
View 7 Replies View RelatedI'm using 2004lt- I have current .dwg in modelspace and set up to plot in PS@ 3/23"-1'-0". I'd like to create a second set of PS tabs to plot portions at 1/4"-1'-0" on the same border when needed.
In its a single viewport in MS and PS the current scale is 1:1 but if i change it to 1/4"-1',etc the plot preview appears wrong
I’ve got a series of third party drawings that are quite intricate, with a series of nested blocks, some of which cannot be exploded.
The issue i have is that they have been drawn with a global scale factor of 1. Our office works with a global scale factor of 10.
Is there a quick and easy way to make the global scale factor 10, but then somehow retain the scale of the third party drawing lines so they retain their look?
Trying to avoid either just drawing with a global scale factor of 1 (which is a pain as all our blocks are set up for global scale factor of 10) or going into each of the bound xrefs and making all line scales 0.1 (mammoth task given the amount of drawings and all the nested/unexplodable blocks).
I am having trouble with width factor in Model Space. I change the width factor and it seems to change but when I print it has changed slightly but not to what it has is model space. I dont really want to have to check the print preview to see if it is correct. Is there a way of displaying the correct width factor in model space?
View 3 Replies View RelatedFor some reason when I edit text and dimensions in model space the text will go huge and my text is non-annotative. If i change it in properties box it does not multiple it or if I am editing text though a viewport it will not multiply. Example - if I have style set to 4 (height) and I create mtext.
Then I decide that I want text to be 5 so I double click on mtext and highlight the text and change to 5 and the text will instantly be 200 not 5, but if I change in properties box it will stay at 5 or if I am in a viewport and change the text by double clicking and highlighting and then changing it to 5 it stays at 5. My issue is for whatever reason only in model space is the text being multiplied by a factor and I cannot figure out why this is happening.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedI feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedI have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedI use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View RelatedI'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedCAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies View RelatedWile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
How to set up all LTSCALE/PSLTSCALE/CELTSCALE to suit my needs. I have a bunch of lines in my drawing that are set to the HIDDEN linetype. In model space, they show up as a continuous line. In paperspace, they show up dashed. Using LTSCALE, I tweaked the scale of the lines in PAPER space, but couldn't get those changes to effect model space.
How can I see the same scale in both MS and PS? Another problem is that some of my viewports display the hidden lines in one scale, and others in another scale, and others yet don't display as hidden at all.
How to set up all of the LTSCALE's and what not .
Somehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
View 4 Replies View Related
