When I go from model tab to layout 1 the drawing does not transfer over. I have went on youtube and looked and even watch the instructor video. Everyone's just transfers right over. mine does not.
View 9 Replieshow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedI have received a drawing that is only showing in the first layout tab on a contractor's template. The drawing is in a viewport of course. The drawing does not show in the model space.
1. Is it possible to send a drawing only in the Layout tab?
2. Is it possible for me to do something to view the drawing in model space and how is it done?
3. Could it simply be a compatibility issue between the contractor's.
I am having problems moving my drawing from the layout tab to the model tab.
Copy and paste is not working.
Is there another way to move the drawing?
I have attached the file that I am working with.
Chestofdrawers1.dwg
As the layout tabs I'd like to have a multiple model-views tabs.
I can use layouts tabs, I can change the background color to same as model tab and all its ok.
However I'm unable to set scale to have text and annotation with a "human" size (that is, thinking on my screen and not on the paper).
Maybe this is a newbie question but I'm lost....
What is what I must to set ? I dont want to use layout to print, but to view my drawing with custom layer settings.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Civil 3D (2013) how much you have to improve....
Restore my Model and Layout Tabs at the bottom of the Drawing area. I went to Options/Display Tab, and under the pannel of "Layouts elements" the box of "Display Layout and Model Tabs" is checked, yet, I can't witness this diplayed. Even if I have to toggle something to make it hidden and displayed, where is the place for that? See the pictures of my settings and the Drawing area.
View 3 Replies View RelatedI need to export a layout to a new model -as a new drawing-. I did ths after bind all the X-ref files and explode them all then with "Export layout to new model" command from the right click menu on Layout tab. But the file is slightly big, the file has more than about 105 layout , the AutoCAD gets hang and after about 10-15 mins it shows a dialogue box contents"Unhandelled exception has occurred in a component in your application. If you click continue the application will ignore this and attempt to continue" I clicked on "Continue" and a file has been created with 0 bites.And that file cannot be opened.
View 8 Replies View RelatedI want to plot model and layput in a dwf file in AutoCAD 2013. So is it possible to plot model and layout in a dwf file?
View 3 Replies View RelatedI have three drawings in modelspace and three viewports in one layout (paperspace), I would like to select each modelspace drawing and assign it to each layout viewport.I'm using Visual Studio 2012, .NET Framework 3.5 and Csharp.
View 4 Replies View RelatedAutoCAD command to turnoff the Model/Layout tab in autocad 2014 or which function i need to call from code.it will trunoff the modellayout.
View 7 Replies View RelatedMy group and I are getting an infrequent but annoying problem with Model Documentation (MD) generated views in paperspace layout tabs. We all on autocad 2013, with sp1.1 installed on x64 machines.
We are seeing objects/ blocks showing in the MD views (viewbase created) in the layout that are no longer in model space. One common factor in this is that these objects seem to always be externally referenced (xref) files that have been either unloaded or completely detached (both cases purges preformed afterwards to wipe any remaining blocks made no difference). In this latest case the ghost objects show up twice (we needed 2 of the same xref) at what appears to be the correct old coordinates.
We have no work around for this and when this occurs we either have to revert to an older version from vault or create a new dwg, port all information over and recreate all views. The interesting thing about this problem is that if we revert to an older version from vault, the ghosts do not reappear/ reoccur at the same commands they appeared at previously.
I am having difficulty with the text in my drawings. When writing dtext or dimensions on my drawings in modelspace the text appears rough/rugged in both model space and layout space. I am using True Type (Arial) as the font. I've read older posts where people have suggested checking in Properties that the text is really laying down at 0 in the Z plane which it is. Some say using True Type is the problem, but just last week I was doing what seemed to be the same operation and I had no problems at all.
View 7 Replies View RelatedI have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
I just recently started using AutoCAD again after using Inventor for several months, and I'm having a very difficult time with annotations. I'd like to annotate the proper way, and I believe that's from withing layout space. I have several small weld details that simply need to be laid out on this drawing. They're all drawn to 1:1 scale, and I'd like to use Viewports to scale them up or down as appropriate.
How to properly annotate dimensions, text, and weld details such that they will all appear of uniform size among all details, but will be associative with respect to the geometry of each detail? This is quite simple in Inventor simply because of how it's designed to work, but AutoCAD works very differently and I'm very unfamiliar with how to work with text styles and dimstyles and weld-symbol styles in this manner. I can't get my annotation styles to work right.
Switching between each layout tab takes about 23 seconds.
What I know about the drawing:
-using AUDIT reveals no errors in drawing.
-Main drawing = 840 KB
-5 Xrefs total
-each Xref less than 1 MB each
-15 Layout tabs total in main drawing
-LAYOUTREGENCTL set to 0, 1 or 2 has no change on situation
Centering the drawing (or viewport) in the lay out, I’m not sure about the best practice to center my drawing in the lay out so that it will be centered as it sis printed from the lay out
This issue is already discussed in the link below
[URL].......
The size of the A4 is 29.7x21The size of by title block is 27x19Then I have like 1 cm margin from top, 1cm and bottom, 1.35 cm from left and 1.35 from rightI managed to have the view port / drawing centered on the A4 layout by setting the “plot offset” to be: X=13.5 and Y=10 using the printer “dwg to pdf.pc3”
It looks fine in the printed pdf, but when it is printed using printer “HP LaserJet P2050 Series PCL6”, the drawing is not centered on the hard copy A4 paper (attached)
What might be the issue here? Is the approach that I used to center the drawing in the layout is efficient? Why the drawing is centered correctly on the pdf but incorrectly centered in the printed A4 paper?
I created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
View 6 Replies View RelatedI wonder is there is a quicker way to rotate your drawing in the models to organize them in the layout?
This isn't fast and convient at all to rotate your hole drawing to fit it in the landscape paper for example.
I know I've read something in the past about a new way of doing it, but can't remember.
I have an exisitng drawing with 80+ layouts tabs that I would like to copy to a new template drawing.
I tried to use design center but to no avail.
How can I do this?
Running Windows 7 Pro
3.20 GHz
12GB Ram
AutoCad 2013 64bit
The problem is about drawing a solid model like the one in the attachment, and I have problem with the triangle, I tried a lot of things, but unfortunately it's not the same as it should be
My work is in the attachment.
and one more thing, as it's my first time with these kind of drawing I need to know what's the meaning (10 Drill, 20 C'bore) for a circle and how I can do it you can find it in the attachment
how to get a drawing from model space onto the layout space. I know it's simple but I can't remember how!
View 9 Replies View Related“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
We have just loaded AutoCAD 2013 from previously using Version 2012, and I am experiencing a very distubing phenomenon. While manipulating the commands in any vieport window in Model Space, the program automatically 'jumps' into Paper Space causing an interruption in work-flow, and losing any command which was in progress during the time. For example, if a number of objects were copied with the intention of placing them elsewhere within the same or another paper space window in 'model space' , the program would jump to paper space and the items would be lost, with the necessity of selecting them all over again. This can happen several times in a row.
View 9 Replies View Relatedhow to scale out these drawings. I have a CAD drawing using metric scale. This drawing has multiple title blocks. and each title block has its own scale. 1:500, 1:50, 1:150, 1:75. Now I make a block out of each title block and scale them out to find out if they plot out on the same sheet, and they do. Now, I still can't find out the scale factor to print them out to scale. I tried using using the scale shown in for each drawing for example 1:500 and it is super small when I do a print preview.
View 7 Replies View RelatedMy firm is starting a project....the Structural side is going to be don in Revit 3d and our Mechanical side uses Autocad w/Cadworxs for our 3d package. Is it possible to export the Revit steel drawing and import that model into Autocad as an xref?
View 1 Replies View RelatedCIvil 3D 2013 / My drawing opens in layout view and all model objects are appropriately coloured by layer. If I hit plot at this point, my colour dependent .ctb file works fine. However, once I swtich to model view, all my linework turns white and if I switch back to Layout view it remains white and plots each line with the weight assigned to the colour white.
View 2 Replies View RelatedI have a bunch of drawings saved on an external hard drive. When I go to open most of them the dim come up correct until it regens then they change to a wierd scale factor, I can highlight all of them and change back to scale 1 and save but when i come back into it they do the same thing???
View 3 Replies View RelatedWhen I zoom in or zoom out the model, normally the dimension will follow the model too.But now in Autocad 2013, even the model size change, the dimension still remain unchange. why? Is there any setting I miss out? URL....
View 2 Replies View RelatedI want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
Is there a proper way to change the settings so the linetypes in model and layout will look the same? Or do I have to change ltscale?
View 7 Replies View Related