Restore my Model and Layout Tabs at the bottom of the Drawing area. I went to Options/Display Tab, and under the pannel of "Layouts elements" the box of "Display Layout and Model Tabs" is checked, yet, I can't witness this diplayed. Even if I have to toggle something to make it hidden and displayed, where is the place for that? See the pictures of my settings and the Drawing area.
View 3 RepliesMy group and I are getting an infrequent but annoying problem with Model Documentation (MD) generated views in paperspace layout tabs. We all on autocad 2013, with sp1.1 installed on x64 machines.
We are seeing objects/ blocks showing in the MD views (viewbase created) in the layout that are no longer in model space. One common factor in this is that these objects seem to always be externally referenced (xref) files that have been either unloaded or completely detached (both cases purges preformed afterwards to wipe any remaining blocks made no difference). In this latest case the ghost objects show up twice (we needed 2 of the same xref) at what appears to be the correct old coordinates.
We have no work around for this and when this occurs we either have to revert to an older version from vault or create a new dwg, port all information over and recreate all views. The interesting thing about this problem is that if we revert to an older version from vault, the ghosts do not reappear/ reoccur at the same commands they appeared at previously.
I have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
I clicked "Hide Model and Layout Tabs" to see what it would do, and now I can't get them back. Not only did I lose them in that drawing, I lost the tabs in EVERY drawing and EVERY version of C3D. I googled the problem and every forum says the same things, and I've tried them without success:
Options >> Display >> Layout elements >> Display Layout and Model Tabs
CUI >> Workspace Properties >> Model/Layout Tabs >> On
I'm lacking a couple of icons on the lower tray to the right of the Model/Paper button.
The baffling thing is that I've lost the tabs on ALL versions of C3D. Is there a magical command line entry that will bring back my beloved tabs?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
Pertaining to the title. I somehow did something which has caused my model/layout tabs to disappear! How do do I get them back?
View 2 Replies View Relatedhow I can disable the preview image for model and layout tabs?This happens when I put the cursor over these tabs.
View 6 Replies View RelatedI have just started working with Architecture 2011, so perhaps there is some strange issue at work here, but I haven't come across it previous releases. Whenever I switch from model tab (in 2D wireframe) to a layout tab and then back to model space, the visual style automatically switches itself to "Wireframe" or "3D Parallel Project", instead staying 2D Wireframe. It is highly annoying as I have to hit the 2D Wireframe button on the Visual Style Menu everytime a switch. This also occurs everytime a hit the Save button. It won't stay put in the visual style that it should.
View 6 Replies View RelatedI have a big drawing and some Mtext from a text layer just disapeared from model space. If i switch to a Layout the text is visible in the layout view and I can select it in a floating viewport, but when I switch back to model again I do not see it.
I added new text in model where missing and now in the Layout I have duplicates, the old one and the new one.
If i try to copy/paste the missing text from a previous version of the drawing, the text just doesn't paste, is not visible.
Right-click on a layout tab, select Rename ... nothing.
It looks like it highlights the tab for a nanosecond then crosshairs appear with an empty command line.
I eventually renamed one tab by selecting rename like fifty-eleven times.
Switching between each layout tab takes about 23 seconds.
What I know about the drawing:
-using AUDIT reveals no errors in drawing.
-Main drawing = 840 KB
-5 Xrefs total
-each Xref less than 1 MB each
-15 Layout tabs total in main drawing
-LAYOUTREGENCTL set to 0, 1 or 2 has no change on situation
LISP routine that can create multiple paper space layout tabs and can name them incrementally.
View 4 Replies View RelatedWhen opening some drawing in Autocad 2014 it automatically creates thousands of layout out tabs which need to be deleted. This causes a huge problem while batch plotting.
View 9 Replies View Relatedissues switching layout tabs by clicking on the tabs?
Occasionally, clicking the Model or other layout tab results in no action, as if I'm not clicking on it.
All other controls (within and external to C3D) function normally so it's not a mouse hardware issue.
It will usually correct itself if I "restore down" the main application window, then maximize it again.
The -layout command is a workaround too.
today I encountered a very disturbing problem while using AutoCad 2014. I was preparing a complex 3d model and suddenly parts started to vanish on a certain zoom. It was very irritating but the biggest prolem is that after turning it off and on again, those parts are completely missing from the model (without saving).
View 9 Replies View RelatedAs the layout tabs I'd like to have a multiple model-views tabs.
I can use layouts tabs, I can change the background color to same as model tab and all its ok.
However I'm unable to set scale to have text and annotation with a "human" size (that is, thinking on my screen and not on the paper).
Maybe this is a newbie question but I'm lost....
What is what I must to set ? I dont want to use layout to print, but to view my drawing with custom layer settings.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Civil 3D (2013) how much you have to improve....
I need to export a layout to a new model -as a new drawing-. I did ths after bind all the X-ref files and explode them all then with "Export layout to new model" command from the right click menu on Layout tab. But the file is slightly big, the file has more than about 105 layout , the AutoCAD gets hang and after about 10-15 mins it shows a dialogue box contents"Unhandelled exception has occurred in a component in your application. If you click continue the application will ignore this and attempt to continue" I clicked on "Continue" and a file has been created with 0 bites.And that file cannot be opened.
View 8 Replies View RelatedI want to plot model and layput in a dwf file in AutoCAD 2013. So is it possible to plot model and layout in a dwf file?
View 3 Replies View RelatedWhen I go from model tab to layout 1 the drawing does not transfer over. I have went on youtube and looked and even watch the instructor video. Everyone's just transfers right over. mine does not.
View 9 Replies View RelatedAutoCAD command to turnoff the Model/Layout tab in autocad 2014 or which function i need to call from code.it will trunoff the modellayout.
View 7 Replies View RelatedI am having difficulty with the text in my drawings. When writing dtext or dimensions on my drawings in modelspace the text appears rough/rugged in both model space and layout space. I am using True Type (Arial) as the font. I've read older posts where people have suggested checking in Properties that the text is really laying down at 0 in the Z plane which it is. Some say using True Type is the problem, but just last week I was doing what seemed to be the same operation and I had no problems at all.
View 7 Replies View RelatedThe tab parts only disappeared from the tabs in BOM.
How can I get it back? picture attached.
I'm working in Lightroom 4 and the module organization at the top right is:
Library
Develop
Map
Book
Slideshow
Print
Web
Somehow, when I was clicking/opening and closing tabs I did something that made the library module tab disappear and I can't figure out how to get it back-
When I'm scrolling through my Layout tabs using the arrows on the bottom left of the screen, if I'm scrolling right I have to click the arrow at a certain speed or it gets hung up on one tab and won't scroll any further. If I'm scrolling left, it only lets me scroll as far as the active tab and then it fades both the "left" and "skip to end left" arrows and won't let me scroll at all. And both directions, unless I'm clicking very slowly on the arrows, instead of scrolling it highlights the name of the tab as though I've clicked "Rename".
View 3 Replies View RelatedI'm new to C# but I'm trying to get a list of the selected layout tabs. Any example in C# or VB.NET.
View 3 Replies View RelatedHow to organize multiple layout tabs. My problem is I need to plot 50 different looking bits from one main plan and need to save the layouts too for future reference..Creating 50 layout tabs in paper space does not seem the best way to do it.
View 7 Replies View RelatedI am working with a large file for a construction project and am looking to archive my layout tabs after producing each phase of deliverables (output).
Is there a way to do this? I do not want to have to "screenshot" my .dwg and save it with the layouts and then delete and keep working in my working file. I'd like to keep everything in one file.
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View Related“annotation scale” on the lay out mode,
I’m not sure about the current “annotation scale” in case of lay out mode.
Annotation scale option is displayed only in the model and viewport mode but not in the lay out mode (attached)!
Based on what annotative objects living on the lay out but neither in the model (or viewport) are re-sized? At this mode, there is no option to choose the annotation scale?
On other words, how to choose the annotation scale in the lay out mode?
For some reason our layout tabs keep re-arranging themselves. All of a sudden our sheet 2 ( or what ever) is between tabs for sheets 35 & 36 (or where ever it wants to be).
we use tabs because 45 sheets of images require never ending scrolling. the current tab is never the image shown....they always start at the 1st tab?
when you are on sheet 40 and want to go to 44.....scroll .
I am using 2013 and it wont let me rename the layouts . I have just 10 layouts and it will let me rename one but not the others. The others just flash the little blue color and back to black.
View 2 Replies View RelatedI am currently working on a large drawing that has many tabs (145), I have made a mistake midway and would like to find a way I can rename them quicker than "Right Clicking" on each tab to change it. That will be very time consuming.
Also, is there a way to print a list of all of the current layouts within a drawing.