AutoCAD Architecture :: Usually Visual Style Behavior When Switching Between Model And Layout Tabs
Aug 20, 2010
I have just started working with Architecture 2011, so perhaps there is some strange issue at work here, but I haven't come across it previous releases. Whenever I switch from model tab (in 2D wireframe) to a layout tab and then back to model space, the visual style automatically switches itself to "Wireframe" or "3D Parallel Project", instead staying 2D Wireframe. It is highly annoying as I have to hit the 2D Wireframe button on the Visual Style Menu everytime a switch. This also occurs everytime a hit the Save button. It won't stay put in the visual style that it should.
View 6 Replies
ADVERTISEMENT
May 17, 2013
I have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.
View 9 Replies
View Related
Sep 19, 2013
issues switching layout tabs by clicking on the tabs?
Occasionally, clicking the Model or other layout tab results in no action, as if I'm not clicking on it.
All other controls (within and external to C3D) function normally so it's not a mouse hardware issue.
It will usually correct itself if I "restore down" the main application window, then maximize it again.
The -layout command is a workaround too.
View 9 Replies
View Related
Sep 1, 2011
Is it at all possible to switch between layout tabs by a command? I'm messing around with a .bat file that creates a script for printing that only prints layout1.
The CAD file I'm trying to print has multiple tabs and all tabs have a different name, Lot 02, Lot 03, Lot 04 (not the standard layout1, layout2, etc).
View 8 Replies
View Related
Jul 18, 2013
Switching between each layout tab takes about 23 seconds.
What I know about the drawing:
-using AUDIT reveals no errors in drawing.
-Main drawing = 840 KB
-5 Xrefs total
-each Xref less than 1 MB each
-15 Layout tabs total in main drawing
-LAYOUTREGENCTL set to 0, 1 or 2 has no change on situation
View 6 Replies
View Related
Nov 12, 2013
I clicked "Hide Model and Layout Tabs" to see what it would do, and now I can't get them back. Not only did I lose them in that drawing, I lost the tabs in EVERY drawing and EVERY version of C3D. I googled the problem and every forum says the same things, and I've tried them without success:
Options >> Display >> Layout elements >> Display Layout and Model Tabs
CUI >> Workspace Properties >> Model/Layout Tabs >> On
I'm lacking a couple of icons on the lower tray to the right of the Model/Paper button.
The baffling thing is that I've lost the tabs on ALL versions of C3D. Is there a magical command line entry that will bring back my beloved tabs?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
View 9 Replies
View Related
Jun 14, 2012
CIvil 3D 2013 / My drawing opens in layout view and all model objects are appropriately coloured by layer. If I hit plot at this point, my colour dependent .ctb file works fine. However, once I swtich to model view, all my linework turns white and if I switch back to Layout view it remains white and plots each line with the weight assigned to the colour white.
View 2 Replies
View Related
May 31, 2013
Restore my Model and Layout Tabs at the bottom of the Drawing area. I went to Options/Display Tab, and under the pannel of "Layouts elements" the box of "Display Layout and Model Tabs" is checked, yet, I can't witness this diplayed. Even if I have to toggle something to make it hidden and displayed, where is the place for that? See the pictures of my settings and the Drawing area.
View 3 Replies
View Related
Jun 17, 2013
Pertaining to the title. I somehow did something which has caused my model/layout tabs to disappear! How do do I get them back?
View 2 Replies
View Related
Jun 11, 2010
how I can disable the preview image for model and layout tabs?This happens when I put the cursor over these tabs.
View 6 Replies
View Related
Oct 2, 2012
We have an intern that has somehow made it impossible for her to edit inside viewports(switching to model space) on her layouts. None of us has seen this before and do not know how to reverse what she has done. This happens with any drawing she opens. She can edit when in the model space tab, but when she goes to one of the layout tabs and double clicks on the viewport she cannot edit. The viewports are not locked.
We have had several people look at it and cannot find what command or setting she changed. She does not have admin rights so I do not think she could have run a script. She is not familiar with AutoCAD Architecture, her experience has been limited to Revit.
View 5 Replies
View Related
Dec 12, 2012
My group and I are getting an infrequent but annoying problem with Model Documentation (MD) generated views in paperspace layout tabs. We all on autocad 2013, with sp1.1 installed on x64 machines.
We are seeing objects/ blocks showing in the MD views (viewbase created) in the layout that are no longer in model space. One common factor in this is that these objects seem to always be externally referenced (xref) files that have been either unloaded or completely detached (both cases purges preformed afterwards to wipe any remaining blocks made no difference). In this latest case the ghost objects show up twice (we needed 2 of the same xref) at what appears to be the correct old coordinates.
We have no work around for this and when this occurs we either have to revert to an older version from vault or create a new dwg, port all information over and recreate all views. The interesting thing about this problem is that if we revert to an older version from vault, the ghosts do not reappear/ reoccur at the same commands they appeared at previously.
View 2 Replies
View Related
Jul 22, 2004
Any lisp file that can plot all of the layout tabs? I am looking for one that will plot to a plt file and also pdf?
View 5 Replies
View Related
Jul 1, 2010
Trying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
View 6 Replies
View Related
Aug 2, 2012
I have 2011 adt and was asked some questions about the model tabs.
Can we stack the model tabs? If so, how? Can we color code the model tabs?
View 5 Replies
View Related
Mar 6, 2013
okay, I need a way to get a list of layout tabs without vl-, vla-, vlax, or LAYOUTLIST functions. Why? You ask?
This is for lisp funct that will run in AcCoreConsose. Apparently the console doesn't yet support these.
Also, need a way to check Effective name of dynamic blocks without vl-, vla- or vlax- funs also.
View 1 Replies
View Related
Nov 25, 2013
Any LISP routine that can create multiple paper space layout tabs and can name them incrementally. I have a template and I wanted to copy tab2 of my layout multiple times and name them incrementally. I have a code shown below that comes close to what I need it to do but it creates a "New Layout" instead of copying the tab I need it to. Please see code below:
(vl-load-com)(defun c:LAYOUT+ (/ *error* prefix i n acDoc oLayouts layoutName) (defun *error* (msg) (if acDoc (vla-endundomark acDoc) ) (cond ((not msg)) ; Normal exit ((member msg '("Function cancelled" "quit / exit abort"))) ; <esc> or (quit) ((princ (strcat "
** Error: " msg " ** "))) ; Fatal error, display it ) (princ) ) (if (and (setq prefix (getstring "
Enter layout name prefix: "))
[Code] ......
View 7 Replies
View Related
Mar 6, 2013
(layoutlist) ... returns a list of strings of the layout tabs in the drawing.I've used this ages... Isn't it a core lisp function, or is it coming from express tools or somewhere else?
View 5 Replies
View Related
Aug 15, 2011
Why line display in model view and layout view could be different?
For example, a line of width 0.35mm and short dashed style is displayed correctly in model view, but in layout view is displayed as thin as the default width, and its dash style is also changed (dash length and interval).
Why does this happen and how to prevent it?
line.png
View 9 Replies
View Related
Mar 7, 2013
I want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
View 8 Replies
View Related
Feb 27, 2012
Somehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
View 4 Replies
View Related
Dec 21, 2009
I have created a new 3D visual style so hidden lines are shown but now i cant get the file to plot monochrome.
View 3 Replies
View Related
Sep 14, 2012
I've been crashing (fatal error, unhandled access violation) a LOT lately, and it happens when I'm changing between tabs - both between layout tabs and from layout to model. I have a brand new computer and a recent install of AutoCAD, which I also ran the repair routine on recently to try to fix the crashing issue. This happened with my old computer as well, and our IT people thought maybe it was too old to handle AC 2013 (old one was about 7 years old), so now I'm running an HP Compaq Elite 8300, Win 7 OS, with an Intel i5-3470 CPU at 3.2 GHz, 8 GB of RAM, and an NVIDIA NVS 300 graphics card. And it still crashes.
I'm using files that were created on my old CAD station, which ran AutoCAD 2008 LT, and it started crashing on me - I suppose it's possible that one or more of those files got corrupted and that's what's causing this.It's crashed three times in the last three days, and probably a total of 10 - 15 times since my new computer came in late last month, and I'm getting pretty tired of it.
View 9 Replies
View Related
Jun 28, 2012
Is there a way to get model space to "display plot styles" through a lisp routine or a script?
i'm currently setting up a whole bunch of custom tool palettes for the company I work for and instead of the icons displaying in their actual colour (at the moment they're green, which doesn't show up very well on the light grey background), I'd rather they show in the plotstyle assigned to the individual dwg's.
call up the page setup manager (while in model space) and click modify, you can then check the radio button to "display plot styles" in the top-right corner. But when you have around 100 - 200 blocks to change, that process can be rather time consuming and cumbersome!
View 3 Replies
View Related
Nov 25, 2013
I'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.
View 3 Replies
View Related
Nov 5, 2013
I've tried doing a block that automatically updates the X and Y coordinates from its moveable leader. I can get it to work in model space or paper space. But my problem is I want it to work in PS, but update with the MS coordinates through the viewport.
I can get it to update, by LISP, by picking a point and passing the points to the blocks attributes. At the moment I have a LISP when actioned it locks the viewports, activates the viewport, and asks you to select a point. Once selected it de-activates the viewport (going back into layout tab) then asks which block you want to update. Where you now select the block and it updates the coordinates. I.e. manually pick the point in MS, switch to PS and then manually pick the block. Then I have to manually modify the leader to the correct location.
I'm hoping that I can (In PS) move the end of the leader to snap to a position in MS and the coord updates to reflect the correct MS coordinates. I'm thinking that maybe this can't be done automatically and that I maybe can move the leader but I'm not sure how I can do it without running a LISP to update the block?
I'd be happy moving the leader then just running a single command and the leader coordinates updating without having to select the points and the block again.
I've attached the block showing the auto update of the attributes (fields).
View 9 Replies
View Related
Nov 6, 2012
When I'm scrolling through my Layout tabs using the arrows on the bottom left of the screen, if I'm scrolling right I have to click the arrow at a certain speed or it gets hung up on one tab and won't scroll any further. If I'm scrolling left, it only lets me scroll as far as the active tab and then it fades both the "left" and "skip to end left" arrows and won't let me scroll at all. And both directions, unless I'm clicking very slowly on the arrows, instead of scrolling it highlights the name of the tab as though I've clicked "Rename".
View 3 Replies
View Related
Apr 18, 2011
I'm new to C# but I'm trying to get a list of the selected layout tabs. Any example in C# or VB.NET.
View 3 Replies
View Related
Aug 21, 2013
How to organize multiple layout tabs. My problem is I need to plot 50 different looking bits from one main plan and need to save the layouts too for future reference..Creating 50 layout tabs in paper space does not seem the best way to do it.
View 7 Replies
View Related
Jan 14, 2014
I am working with a large file for a construction project and am looking to archive my layout tabs after producing each phase of deliverables (output).
Is there a way to do this? I do not want to have to "screenshot" my .dwg and save it with the layouts and then delete and keep working in my working file. I'd like to keep everything in one file.
View 2 Replies
View Related
Apr 13, 2012
Right-click on a layout tab, select Rename ... nothing.
It looks like it highlights the tab for a nanosecond then crosshairs appear with an empty command line.
I eventually renamed one tab by selecting rename like fifty-eleven times.
View 9 Replies
View Related
