AutoCAD Architecture :: Stack / Color Code Model Tabs

Aug 2, 2012

I have 2011 adt and was asked some questions about the model tabs.

Can we stack the model tabs?  If so, how? Can we color code the model tabs?

View 5 Replies


ADVERTISEMENT

AutoCAD Architecture :: Usually Visual Style Behavior When Switching Between Model And Layout Tabs

Aug 20, 2010

I have just started working with Architecture 2011, so perhaps there is some strange issue at work here, but I haven't come across it previous releases. Whenever I switch from model tab (in 2D wireframe) to a layout tab and then back to model space, the visual style automatically switches itself to "Wireframe" or "3D Parallel Project", instead staying 2D Wireframe. It is highly annoying as I have to hit the 2D Wireframe button on the Visual Style Menu everytime a switch. This also occurs everytime a hit the Save button. It won't stay put in the visual style that it should.

View 6 Replies View Related

AutoCAD Architecture :: Paper Space And Model Space Tabs?

Feb 27, 2012

Somehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.

View 4 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Turnoff ModelLayout Tabs In 2014 From Code?

May 20, 2013

hiding the modellayout from code.My code is updating the registery properly.but it is not reflecting/hiding the model/layout tabs in application. hide/trunoff from code.Model/layout is not required for my application.Is there any command to  hide model/layout tab.

void CMyApp::TurnoffModelViewLayoutTAB()
{
//TurnOff Model View Tab   

[Code]....

View 2 Replies View Related

AutoCAD Civil 3D :: Model And Layout Tabs Are Gone?

Nov 12, 2013

I clicked "Hide Model and Layout Tabs" to see what it would do, and now I can't get them back. Not only did I lose them in that drawing, I lost the tabs in EVERY drawing and EVERY version of C3D. I googled the problem and every forum says the same things, and I've tried them without success:

Options >> Display >> Layout elements >> Display Layout and Model Tabs

CUI >> Workspace Properties >> Model/Layout Tabs >> On

I'm lacking a couple of icons on the lower tray to the right of the Model/Paper button.

The baffling thing is that I've lost the tabs on ALL versions of C3D. Is there a magical command line entry that will bring back my beloved tabs?

HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014

View 9 Replies View Related

AutoCAD Architecture :: No Tabs Menu

Feb 22, 2011

only just begginning to use CAD and I installed Architecture 2011 but there is no tab menu when there is supposed to be?

View 4 Replies View Related

AutoCAD 2013 :: Model And Layout Tabs Disappeared?

May 31, 2013

Restore my Model and Layout Tabs at the bottom of the Drawing area. I went to Options/Display Tab, and under the pannel of "Layouts elements" the box of "Display Layout and Model Tabs" is checked, yet, I can't witness this diplayed. Even if I have to toggle something to make it hidden and displayed, where is the place for that? See the pictures of my settings and the Drawing area.

View 3 Replies View Related

AutoCAD 2010 :: Lost My Model / Layout Tabs

Jun 17, 2013

Pertaining to the title. I somehow did something which has caused my model/layout tabs to disappear! How do do I get them back?

View 2 Replies View Related

AutoCAD Architecture :: Missing Tabs In Ribbon?

Jun 13, 2011

In AutoCAD Architecture 2011, some of the tabs are missing. One is the Insert tab. So I can not insert an xref.

how to regenerate the ribbon...if that is what I need to do.

View 2 Replies View Related

AutoCAD Architecture :: No Tabs Or Palettes Loaded

Sep 2, 2013

I was installing my Express tools & somehow hit the unload button by mistake,now when i type Ribbon..It says no tabs or palets loaded.Which file do i have to Upload ?

View 2 Replies View Related

AutoCAD 2010 :: Finding Paper Space Tabs And Model Tab?

Aug 20, 2012

I just changed jobs to a company that uses MEP2012. It seems as though it is not possible to revert to Acad classic with this version. So, I am trying to mimic classic as much as possible.

One of the challenges I have found is finding the paper space tabs and model tab? it used to be directly above the command line, is there a command to turn it on?

View 9 Replies View Related

AutoCAD Architecture :: How To Turn Off Contextual Ribbon Tabs

Nov 22, 2013

I'm a right clicker.  Contextual ribbon tabs pop up every time I touch an object. They require additional clicks and mouse movements. I don't want them. How can I stop them? I just want the default ribbon.  I was able to do this on a previous version but now I forget how. Version upgrades do not bode well for old people.

View 2 Replies View Related

AutoCAD Architecture :: Ribbon Does Not Have Any Tabs Or Panels Currently Loaded

Mar 3, 2009

This morning after no problems yesterday.

"This Ribbon does not have any tabs or panels currently loaded."

It was there yesterday until I quit ACA, where did it go?

Did Autodesk install a virus that deletes the Ribbon after a predefined number of uses? It doesn't make any difference which workspace is invoked it is not there. In Document it is just completely gone and typing ribbon at the command line brings up the "This Ribbon..." as is the case in all the other workspaces. How does this happen?

View 9 Replies View Related

AutoCAD 2010 :: How To Disable Model And Layout Tabs Preview Image

Jun 11, 2010

how I can disable the preview image for model and layout tabs?This happens when I put the cursor over these tabs.

View 6 Replies View Related

AutoCad :: How To Convert 3D Model To CNC G-code (SAT)

May 19, 2013

I want to use some free CAM software to generate G-code for my 3D model (*.sat).

View 1 Replies View Related

AutoCAD Architecture :: Unable To Edit In Viewport (layout Tabs)

Oct 2, 2012

We have an intern that has somehow made it impossible for her to edit inside viewports(switching to model space) on her layouts. None of us has seen this before and do not know how to reverse what she has done.  This happens with any drawing she opens.  She can edit when in the model space tab, but when she goes to one of the layout tabs and double clicks on the viewport she cannot edit.  The viewports are not locked. 

We have had several people look at it and cannot find what command or setting she changed.  She does not have admin rights so I do not think she could have run a script.  She is not familiar with AutoCAD Architecture, her experience has been limited to Revit. 

View 5 Replies View Related

AutoCAD 2013 :: Model Documentation Generated Views In Paperspace Layout Tabs

Dec 12, 2012

My group and I are getting an infrequent but annoying problem with Model Documentation (MD) generated views in paperspace layout tabs.  We all on autocad 2013, with sp1.1 installed on x64 machines. 

We are seeing objects/ blocks showing in the MD views (viewbase created) in the layout that are no longer in model space.  One common factor in this is that these objects seem to always be externally referenced (xref) files that have been either unloaded or completely detached (both cases purges preformed afterwards to wipe any remaining blocks made no difference). In this latest case the ghost objects show up twice (we needed 2 of the same xref) at what appears to be the correct old coordinates. 

We have no work around for this and when this occurs we either have to revert to an older version from vault or create a new dwg, port all information over and recreate all views.  The interesting thing about this problem is that if we revert to an older version from vault, the ghosts do not reappear/ reoccur at the same commands they appeared at previously. 

View 2 Replies View Related

AutoCAD 2013 :: 2014 Crash When Switching From Model Space To Layout Tabs

May 17, 2013

I have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts. 

This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab

where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.

I have submited the error report to AutoDesk but i have not seen any other comments about it.

View 9 Replies View Related

AutoCAD Inventor :: Dim Errors In Model By VBA Code?

Dec 6, 2011

I am using below code to create a Rectangle 4 mm X 3 mm x 1 mm, I am using mm template but the model shows 40 mm X 30 mm x 10 mm.

Private Sub CommandButton1_Click()
Dim oProjectMgr As DesignProjectManager
Set oProjectMgr = ThisApplication.DesignProjectManager
Dim oTemplatesPath As String

[code]....

View 4 Replies View Related

AutoCAD Architecture :: Missing Menu Tabs (File / Edit / Window)

Jun 26, 2010

I recently loaded AutoCAD Architecture 2008 and the menu tabs for File, Edit, Window etc were all missing. They are replaced with a tab that says M-Color 9.5. When i load the program with older files (from this morning) the menu tabs are there but then they disappear. How do i get them back?

Also in addition to that my toolbars are gone, but i can recover those when i have my tool bars.

View 2 Replies View Related

AutoCAD Architecture :: Create Layer That Is Turned Off In All Drawing View Ports And Tabs

Jun 28, 2011

I have several paperspace tabs on my drawing. When I create a new layer on the drawing, I have to go to every tab and viewport to turn on or off the new layer. Is there a way to create a layer that is turned off in all the drawing viewports and tabs. Then, I only have to go to the paperspace tab and viewport I want the layer to be seen and turn it on.

View 1 Replies View Related

AutoCAD 2010 :: G-code From 3D Mesh Model For CNC 3axis Machine?

Sep 25, 2012

create a G-code from an AutoCAD desktop 3D model of a 1911 pistal grip saved as a DXF file. I have a CNC 6040 3 axis routing machine. I have tried to load the DXF file as an import but the file is not recognized by the Mach3 software.

I have downloaded a lisp comand for my AutoiCAD program which is supposed to generate a G-code within Autocad but It doesnt recongnized some 3D elements. I am having a dificult time getting the generater to read a "mesh" 3D form to generate a G-code. I hope this doesnt sound all too confusing... the bottom line is I cant seem to get a G-code out of a 3D CAD form....way to generate smoothly a G-code from an AutoCAD 3D form?

View 9 Replies View Related

AutoCAD Architecture :: VB Code To Detect If Project Is Loaded?

Dec 7, 2012

There is a way to detect is a project is loaded using PSD VB code?

View 9 Replies View Related

AutoCAD Civil 3D :: Switching Layout Tabs By Clicking On The Tabs?

Sep 19, 2013

issues switching layout tabs by clicking on the tabs?

Occasionally, clicking the Model or other layout tab results in no action, as if I'm not clicking on it.

All other controls (within and external to C3D) function normally so it's not a mouse hardware issue.

It will usually correct itself if I "restore down" the main application window, then maximize it again.

The -layout command is a workaround too.

View 9 Replies View Related

Photoshop :: Color Code Don't Show The Same Color On The Web Page

Jun 17, 2009

I am using Photoshop Cs4.

As you can see on the picture, the color code don't show the same color on the web page:

View 1 Replies View Related

Photoshop :: What Is The Color Code For GOLD COLOR!

May 30, 2006

Anyone know what is the color code for GOLD COLOR in adobe illustrator and photoshop?

View 7 Replies View Related

AutoCAD Inventor :: Stress Analysis Color Code

May 12, 2013

I have managed to perform a stress analysis on a part (which only 1/4 of it is shown due to its symmetry). Upon running the simulation and displaying the results for Von Mises Stress, all the part has been fully colored in blue, and there are no signs of any red areas. However, the bar line on the left still indicates that there are areas which are highly stressed. I'm now confused weather if there any areas of the part are exhbiting this type of stress, and if yes, how can I locate the most highly stressed parts?

View 7 Replies View Related

AutoCAD Architecture :: 2D View From 3D Model

Jan 8, 2014

I got a 3D model from a building but somehow it is not solid, you can "see trough the walls" (as in image attached). I want to create a plan view for each floor and a side view from this 3d model.

View 1 Replies View Related

AutoCAD Architecture :: Sections With Same Layers As 3D Model

May 14, 2012

I would like to create sections from my 3D model that would directly associate the layers cut from the model. In other words, I would like the line work in the section to be on the same layer as entities in model.

View 1 Replies View Related

AutoCAD Architecture :: Export Model Levels To 3DS MAX?

Aug 6, 2012

I;m trying to setup linked files in max from AutoCAD Architecture 2013. However, for each file attached the levels of the project from ACA are not recognized in MAX - all the levels are stacked ontop of eachother in the same place. I did not see an option in the presets for MAX to understand this.

View 1 Replies View Related

AutoCAD Architecture :: How To Do Animation Of Walk-around Or Fly By Of A Model

Mar 7, 2012

how to do an animation of a walk-around or fly by of a model?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved