AutoCAD Architecture :: VB Code To Detect If Project Is Loaded?
Dec 7, 2012There is a way to detect is a project is loaded using PSD VB code?
View 9 Replies
ADVERTISEMENT
AutoCAD VB :: Slow EXPLODE When Empty VBA Project Loaded
Dec 20, 2012I Exploded polylines (for GIS use).
acvba.arx is loaded but no projects (vbaman is empty)
Time to Explode about 3 seconds.When I open the Visual Basic Editor and closs it directly, an empty project is made (ACADProject in vbaman).
Time to Explode now: about 11 seconds ! After unloading ACADProject in vbaman the time to Explode is 3 seconds again.
Without acvba.arx loaded, time to Explode: directly ! ! ! (0,3 seconds) ! !
AutoCAD 2013, 64b.
AutoCAD Architecture :: Tool Palettes Aren't Same In New Project As In Project Template?
Dec 6, 2011I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies View RelatedAutoCAD Architecture :: No Tabs Or Palettes Loaded
Sep 2, 2013I was installing my Express tools & somehow hit the unload button by mistake,now when i type Ribbon..It says no tabs or palets loaded.Which file do i have to Upload ?
View 2 Replies View RelatedRevit :: No Doors Family Is Loaded In Project
Oct 25, 2013When I try to add a window or door, I get a message: "No doors family is loaded in the project..etc etc" and then I try to go and find a default template file to use which I assume has basic families loaded, I can't find any anywhere. I'm stuck at step 1, already.
View 6 Replies View RelatedAutoCAD Architecture :: Ribbon Does Not Have Any Tabs Or Panels Currently Loaded
Mar 3, 2009This morning after no problems yesterday.
"This Ribbon does not have any tabs or panels currently loaded."
It was there yesterday until I quit ACA, where did it go?
Did Autodesk install a virus that deletes the Ribbon after a predefined number of uses? It doesn't make any difference which workspace is invoked it is not there. In Document it is just completely gone and typing ribbon at the command line brings up the "This Ribbon..." as is the case in all the other workspaces. How does this happen?
AutoCAD Architecture :: Autodesk Loaded On Windows 7 But Will Not Open Up
May 27, 2011My autodesk loaded on windows 7 but will not open up.
View 3 Replies View RelatedAutoCAD Architecture :: 2012 - The Configured Heidi Driver Cannot Be Loaded
Apr 25, 2011ve seen many posts about this type of error, however, I do not see how to correct this in 2012. I am operating 2012 architecture in Windows 7 through VMware on an IMac. I have run 2010 and 2011 on this machine without this issue but now 2012 has this issue. I check Performance Tuner Log and the 3d device is VMware SVGA 3D.
View 2 Replies View RelatedAutoCAD VB :: Get Current Project Number And Drawing By Using Some Vba Code?
May 13, 2011Is that possible to get the current Project number and Drawing by using some vba code?
View 2 Replies View RelatedAutoCAD Inventor :: Code Failure Setting Active Project Across A Network
May 9, 2011I am trying to write code to set the active project across a network. In the code below I have hard written the address in to our main server named "Rusk" . It fails with an error message "The parameter is incorrect". I have tried this using a mapped drive as well with no luck.
I think it may be a permissions error, I am running Vista 64bit. Inventor version 12. If it is a permissions error, are there any sample code snippets out there I can use to set the permissions?
Public Sub SetActiveProject()
Dim ProjectID As String 'variable to hold Project ID
Dim ProjectAddress As String 'variable to hold an address path
'Verify the project ID is entered
If UserForm1.TextBox3.Value = "" Then
[code]....
AutoCAD Architecture :: Sheet List Insertion From Project Navigator To Architecture Sheet
Jun 15, 2011Often when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies View RelatedAutoCAD Architecture :: Stack / Color Code Model Tabs
Aug 2, 2012I have 2011 adt and was asked some questions about the model tabs.
Can we stack the model tabs? If so, how? Can we color code the model tabs?
AutoCAD Architecture :: Use Project Navigator
Dec 11, 2011Does it make sense to use PN for a residential project. This house is in a location that requieres the living space to be 36" above the garage level. In addition the LR ceiling is 18' higher than the other rooms. How shouuld I set up the levels in the construct tab of PN. I am thinking that the garage is level 0, and the other rooms other than LR would be level 1 and the LR to be level2. Or is it that the whole house is one level with 3 divisions?
View 2 Replies View RelatedAutoCAD Architecture :: How To Get Project Name To Be 3 Lines
Mar 14, 2013I'm using ACA 2013. I am using sheet sets and I am working on my Sheet Template.Typcially we use a 3 line project title in our standard title block and I would like to continue doing so . The problem is that the Project Data only has one line for the "Project Name".
How can I get the project name to be 3 lines that separate when I want them to, I.E.
NEW MEDCIAL OFFICE BUILDING
FOR
MY LOCAL HOSPITAL SYSTEM
Is this a change in the "Project Name" field in the sheet template?
AutoCAD Architecture :: Error Using Project Navigator
Sep 30, 2011i"m trying to use architecture 201. I'm getting booted out of the software when I try to select a file using Project Navigator. as soon as I hover over the file name it kicks me out.
INTERNAL ERROR: !dbobji.cpp@7316: eNotOpenForWrite
Using windows 7 currently but it happened with xp pro also
AutoCAD Architecture :: Copy A Sheet From One Project To Another?
Jan 25, 2012I would like to copy a sheet from one project to another. Nothing changes from one to the other. Much like copying a view, I would like to copy a sheet. Is this possible and how?
View 3 Replies View RelatedAutoCAD Architecture :: Setting Up Units In Project?
May 13, 2013What is the correct procedure to set up units in a project. I want to work with meters, ant the metric template is in milimeters. if I change the mm in m, when I make views the callouts are displayed incorrectly.
View 1 Replies View RelatedAutoCAD Architecture :: Transferring Text To Another Project
Jun 6, 2012how to transfer text (cover sheet) from one project to another. I opened legend and then put it on a sheet then went to transfer it to the next project and it wont except it.I will need the cover sheet for every project.
View 6 Replies View RelatedAutoCAD Architecture :: Project Navigator - File Name
Aug 12, 2013Had file "weirdness" when users place "odd" characters in filenames?For example, I have several users that use the ampersand sign in the file name as in: FF&E HT.dwg.
I'm wondering if this causes an issue with the corresponding XML file since the ampersand is kind of a special character.
These users were able to open different versions of the "same" file at various points in its generation. One was the current version, another was several days old and the third version was a month or so old. Each time the file was opened (on the same day and time), the users did not get a warning stating the file was already opened and they both opened the file from Project Navigator.
We are currently running AutoCAD Architecture 2011.
AutoCAD Architecture :: Insert Drawing In Project Navigator?
Jun 12, 2013Is it possible to include an existing drawing into a new project I created so it shows up in the project navigator?
I'm running ACA 2011.
AutoCAD Architecture :: Moving Project Navigator Projects To Another PC
Dec 27, 2012I am new to the project navigator, I have several projects I would like to move to another computer and I am not sure how to do this. I have searched but must not have used the right words in the search. What is the correct way to move or export these project and import them into the other PC?
View 2 Replies View RelatedAutoCAD Architecture :: Project Browser Has Double Entries
Jul 20, 2012For some reason unknown to us the Project Browser has double entries for the current projects: that is, a project shows up twice, with the same job number and such.
Windows Explorer correctly shows only one project folder, and in the Project Browser selecting either entry will bring up the project correctly.So, functionally we could live with this but I'd like to clean this up and I think deleting either entry would actually delete the project.
AutoCAD Architecture :: Project Navigator Continuously Loading?
Nov 15, 2012In my office of about 30 computers and over the course of about 10-12 months we have been experiencing a problem with project navigator. When opening ACAD or changing projects about 60% of the time it gets hung up and the load bar perpetually loads over and over again. If just left to run it takes 5-10 mins to load the project then ACAD will crash after a couple of commands. If opening the task manager and ending the program it will often freeze the computer for about 5-10 mins as well.
We have been actively using the project navigator for years and not until the last yr have we been having this problem. We bought pretty much the whole office new computers a few months ago and the problem still exists. We are running AutoCAD Architecture 2012 and our machines are window 7, intel core i7 3.5 GHz, 8 GB ram, 64 bit operating systems, with a Nvidia Quadro 2000 graphics card. So our machines are solid.
AutoCAD Architecture :: Cannot Edit Project Properties 2014 On W8
Nov 18, 2013I am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.
AutoCAD Architecture :: Project Browser Icon Missing?
Sep 9, 2011I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
View 1 Replies View RelatedAutoCAD Architecture :: Project Navigator - Inaccessible - Jumped Behind Background?
Sep 21, 2011Co-Worker was in the process of moving his mouse, accidentally clicked, catching PN and began draggin it. Upon unclicking, PN moved to what I can only describe as the background.
Currently have MdiTab18.arx loaded in my applications to provide drawing tabs. PN appears BEHIND THAT. Toolbars and pull down menus are in front of it. unloading app, moving toolbars,....nothing allows me access to it to drag it back.
Tried restarting, but PN stays put. Tried different work space, but PN doesn't move.
AutoCAD Architecture :: Path Xrefs For A Moved Project Folder
Jan 8, 2014What is the best method to re-path x-refs in a project whose folder has been moved. We are talking about 60-100 x-refs here.The originals were created in ACA 2009 and were not pathed relatively; nor was Project Navigator used. We are currently using ACA 2014.
View 1 Replies View RelatedAutoCAD Architecture :: Project Browser Disappears In Classic View?
May 4, 2012AutoCad 2012 and 13- PROJECT NAVIGATOR or project browser disappears in Classic view.
We are running 2012 and like the look of the older versions. We are using the Autocad Classic workspace, BUT the Project Browser and all that jazz is missing. Where or how do i get it back?
AutoCAD Architecture :: Roof Line Command In Project Environment
Feb 15, 2011I am using 2011 and have created a project for a 2 story structure. I have constructs for each floor, each floor slab and roof slab.
In which construct do I apply the roofline command? I am unsuccessful so far. Does the roof slab need to be in the same construct as the walls?
AutoCAD Architecture :: Unable To Save A View Dwg In Project Manager?
Aug 13, 2012I am running ACA 2011 x64. Recently I have been unable to save a view drawing in the project manager. When I press the save button it a window pops up telling me it cannot save the drawing in my project folder and saves it as a .tmp file.
View 5 Replies View RelatedAutoCAD Architecture :: How To Locate Project Tab And Title Block Setup Tab
Oct 4, 2011I am attempting to create my first Title Block with Attributes. I came across this online demo that suggests navigating to the "Projects" Tab - then selectign the "Title Block Setup" tab. I am using CAD 2012 and spent the last hour searching for this command. It does not appear on my navigation or tool palletes. URL....
View 2 Replies View Related
