I am new to the project navigator, I have several projects I would like to move to another computer and I am not sure how to do this. I have searched but must not have used the right words in the search. What is the correct way to move or export these project and import them into the other PC?
View 2 RepliesDoes it make sense to use PN for a residential project. This house is in a location that requieres the living space to be 36" above the garage level. In addition the LR ceiling is 18' higher than the other rooms. How shouuld I set up the levels in the construct tab of PN. I am thinking that the garage is level 0, and the other rooms other than LR would be level 1 and the LR to be level2. Or is it that the whole house is one level with 3 divisions?
View 2 Replies View Relatedi"m trying to use architecture 201. I'm getting booted out of the software when I try to select a file using Project Navigator. as soon as I hover over the file name it kicks me out.
INTERNAL ERROR: !dbobji.cpp@7316: eNotOpenForWrite
Using windows 7 currently but it happened with xp pro also
Had file "weirdness" when users place "odd" characters in filenames?For example, I have several users that use the ampersand sign in the file name as in: FF&E HT.dwg.
I'm wondering if this causes an issue with the corresponding XML file since the ampersand is kind of a special character.
These users were able to open different versions of the "same" file at various points in its generation. One was the current version, another was several days old and the third version was a month or so old. Each time the file was opened (on the same day and time), the users did not get a warning stating the file was already opened and they both opened the file from Project Navigator.
We are currently running AutoCAD Architecture 2011.
Is it possible to include an existing drawing into a new project I created so it shows up in the project navigator?
I'm running ACA 2011.
In my office of about 30 computers and over the course of about 10-12 months we have been experiencing a problem with project navigator. When opening ACAD or changing projects about 60% of the time it gets hung up and the load bar perpetually loads over and over again. If just left to run it takes 5-10 mins to load the project then ACAD will crash after a couple of commands. If opening the task manager and ending the program it will often freeze the computer for about 5-10 mins as well.
We have been actively using the project navigator for years and not until the last yr have we been having this problem. We bought pretty much the whole office new computers a few months ago and the problem still exists. We are running AutoCAD Architecture 2012 and our machines are window 7, intel core i7 3.5 GHz, 8 GB ram, 64 bit operating systems, with a Nvidia Quadro 2000 graphics card. So our machines are solid.
Co-Worker was in the process of moving his mouse, accidentally clicked, catching PN and began draggin it. Upon unclicking, PN moved to what I can only describe as the background.
Currently have MdiTab18.arx loaded in my applications to provide drawing tabs. PN appears BEHIND THAT. Toolbars and pull down menus are in front of it. unloading app, moving toolbars,....nothing allows me access to it to drag it back.
Tried restarting, but PN stays put. Tried different work space, but PN doesn't move.
Often when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies View RelatedI have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
is it possible to copy everything that is set up in the Project Navigator (Sheets, Views etc) and use it for a complete new Project?
View 1 Replies View RelatedI downloaded Inventor 2014. My O/S is Windows 7 Ultimate. In the projects folder there is supposed to be Projects called iLogic 2011 Samples, iLogic 2011 Tutorials, iLogic 2012 Samples, Railing iLogic Sample Advanced, and Railing iLogic Sample Base. None of these PROJECTS show up in my projects editor. Do I have to completely uninstall and reinstall Inventor 2014 to get these projects to hopefully load?
View 8 Replies View RelatedMoving C3D projects to a new server, specifically regarding data shortcuts?
For example, current projects live in: \serversharexxxproj_number
Soon, that path will be \A_new_server\shareBproj_numberdesign
Upon internal inspection, the data shortcuts are storing the full path and a relative path. Based on our initial tests, C3D is resolving the path to the source drawing using the relative path, even though the "full path" stored in the data shortcut is invalid.
I don't think we will need to use the "Data ShortCuts Editor" to fix the paths as long as the relative directory structure remains intact.
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies View Relatedso I frequently bring older versions of projects into my current AE project, particularly when revising spots, what I want to understand clearly is the behavior of AE projects once they are imported into a larger project.
If I make edits to the compositions of the nested project, are those changes saved back to the nested project's orginal file? If I alter the original nested projects file, how much will it change instances of it nested in other projects?
How to import 3D projects from AutoCAD Architecture into Revit ? A 2D layout has come through from a 3D DWG, though 3D structures have not.
View 2 Replies View RelatedI am doing a football program. It will be a standard 8.5x11 background page that will have small boxes of each senior, along with a box at the bottom of the photo that has their name and position. Sounds easy enough, I know. I came up with the idea to make a "Sr. Player Block" template with a block (just a rectangle shape) set at the bottom of the page which would allow me to pick the players image, arrange it to where it goes to the back so the block will show, adding their name and position on it, and then I was planning on flattening and saving each block and moving it to the background page. My problem is, is that when I open the actual photo, which looks great, nice and clear, to the block template, it gets pixalated and looks fuzzy! I have also noticed the same problem on some family program ads i have attempted, the photos I have opened (that get opened in a different little box look fine, but when i move them they look blurry...
View 2 Replies View RelatedI need to move projects and clips from an old system drive (restored from system crash, unbootable) to a new install on a new disk.
Is there a "best practice" for moving projects?
It looks like this
Disk1 (old)
/usr/discreet/clip/stonefs7/old projects
/usr/discreet/project/old projects
Disk2 (new)
/usr/discreet/clip/stonefs7/
/usr/discreet/project/
Is it possible, on a Finder level, to move project information (like sequences) between machines using Finder? After my current Smoke install has self-destructed without any fix from Autodesk, I need to retreive my work in progress.
I've tried copying the folder from /usr/discreet/project/ into the same location of another system with the same release version but it does not appear in either the launch screen or Media Hub.Can I replace the entire /discreet/ folder with the one from my crashed system to get the project back?
I have several discrete projects which I have created in VideoStudio over time and would now like to combine some into a single project before editing.
View 4 Replies View RelatedAfter archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
I'm using ACA 2013. I am using sheet sets and I am working on my Sheet Template.Typcially we use a 3 line project title in our standard title block and I would like to continue doing so . The problem is that the Project Data only has one line for the "Project Name".
How can I get the project name to be 3 lines that separate when I want them to, I.E.
NEW MEDCIAL OFFICE BUILDING
FOR
MY LOCAL HOSPITAL SYSTEM
Is this a change in the "Project Name" field in the sheet template?
I would like to copy a sheet from one project to another. Nothing changes from one to the other. Much like copying a view, I would like to copy a sheet. Is this possible and how?
View 3 Replies View RelatedWhat is the correct procedure to set up units in a project. I want to work with meters, ant the metric template is in milimeters. if I change the mm in m, when I make views the callouts are displayed incorrectly.
View 1 Replies View Relatedhow to transfer text (cover sheet) from one project to another. I opened legend and then put it on a sheet then went to transfer it to the next project and it wont except it.I will need the cover sheet for every project.
View 6 Replies View RelatedI am having a problem with moving a line that is attached at a corner to another, as it moves that line as if I clicked on the intersecting snap point at the end of both lines and dragged it. I want to move or copy the line away, but it somehow is attached to the other, and is quite annoying and impossible to work with without deleting and redrawing lines. I've tried exploding them, but they are not joined in that way, and are not "grouped" (I don't think, because when I did "group" them, it made a box around them and highlighted both lines at the same time). A symbol shows that is two boxes, one an outline and the other solid which is up and to the right. I can't figure out what mode it is in to turn it off!
View 3 Replies View Relatedhave trouble moving doors or windows within a wall?
I am trying to move a door so that the door is flush with a face of wall. The prompts in acad do not match the instructions.
For instance; select door, okay. then from anchor panel select 'reposition within wall', okay a red line appears and prompt to 'select position on the opening'. okay so i click the face or side of door jamb then select a reference point. (guide says select point to measure to) and on and on. Door never moves.
it should be; select door, select reposition in wall, select reference point (interior, exterior, midpoint), select the desired location. Done.
Instead it is select this that and the other , measure from here, select, click.click click.
I'm getting a little frustrated with the multiline attribute. Every time a place it in a block and save the file, the tag moves to the left when I re-open the block file or try to insert the block in another file. how to stop the tag from moving? FYI Locking the tags position makes no difference.
View 9 Replies View RelatedThere is a way to detect is a project is loaded using PSD VB code?
View 9 Replies View RelatedFor some reason unknown to us the Project Browser has double entries for the current projects: that is, a project shows up twice, with the same job number and such.
Windows Explorer correctly shows only one project folder, and in the Project Browser selecting either entry will bring up the project correctly.So, functionally we could live with this but I'd like to clean this up and I think deleting either entry would actually delete the project.
I am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.
I'm using Acad Architecture 2010, and my quick access toolbar does not have the Project Browser Icon, and my application panel has no Save or Open Project Browser either. I can only get to it by "Configure" in Project Standards panel. It is not in CUI.
View 1 Replies View Related