I'm getting a little frustrated with the multiline attribute. Every time a place it in a block and save the file, the tag moves to the left when I re-open the block file or try to insert the block in another file. how to stop the tag from moving? FYI Locking the tags position makes no difference.
View 9 RepliesI am trying to find a way to programmatically move our AutoCAD room tag attribute data to new AEC space property sets. I work in a hospital that has approx. 1 million s.f. and over 3000 rooms. Obviously a daunting task to do room by room.
View 4 Replies View RelatedMy method creates a attribute, how to a create a multi-line attribute?
using (Transaction trAdding = dbCurrent.TransactionManager.StartTransaction())
{
BlockTable btTable = (BlockTable)trAdding.GetObject(dbCurrent.BlockTableId, OpenMode.ForRead);
string strBlockName = "ATTRBLK" + System.Convert.ToString(blockName);
try
{
if (btTable.Has(strBlockName))
[Code]....
When will working with multiline attributes get easier? Having to do multiple clicks to get to a place to edit is one thing, but then you have to use multiple clicks to get out of it. Surely Autodesk can make this an easier process. It was great when these were finally added, now they just need to be more user friendly.
View 1 Replies View RelatedI've created tags with text below them. The text is a multline attribute. I save the block with the background mask on.
When I add these blocks to multileader styles, that setting is lost and even after creating a multileader, editing the multiline attribute and turning the mask back on, the setting will not save for some reason.
One very noticeable affect of losing the background mask is that when one is editing the multiline attribute AutoCAD leaves the original text visible and overlaying the text that is updating. This makes it nearly impossible to see the edits one is making. One has to set the background mask every time they edit that multileader if they need to change the text in the mutliline attribute.
Using AutoCAD LT 2010.
I am using a multiple line attribute. I insert the block, fill in the text, and adjust the width of the multi-lines text so the lines are longer and there are fewer of them. I save and close the file, then re-open some time later and the width of the multli-ine attribute has reverted back to a different width (shoter) - I am assuming it is the default width that I set to the attribute. Is there a setting to stop this from happening? Is there something I should do when I create the attirbute?
View 2 Replies View Relatedit's possible to manipulate the vertical line spacing of multiline attributes within a block?
View 0 Replies View RelatedWhen I select a block that contains a multiline attribute my AutoCAD does not display the corner grips of the attribute if its location is "locked" in the block. Is there a setting I can change to show grips in 2012? Apparently a co-worker of mine that uses 2011 has grips when selecting the block.
If I unlock the location I have grips (not the same ones I am used to seeing from mtext though) but I do not want the attribute location unlocked..I was understanding that the multiline attribute was simply an attribute containing an mtext.
I was trying to find out, how to change the width factor of multiline attribute and I failed.
The only way was to change the width factor of texstyle the attribute uses.
Is there a way to override this property for a single attribute? And if not, is there some reason for that?
significance of extra dxf 1 groups in the entity data of a multiline attribute? I am looking at one for the first time, so I don't know whether or not to expect multiple 1 groups. In the single example I have created there are two and the first one seems to be ignored. Can I count on that being the case all the time? Data for the one I'm looking at follows, and what shows up on the drawing display is only the contents of the second dotted pair with 1 as a key.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
((-1 . <Entity name: 7ec37d18>)
(0 . "ATTRIB")
(330 . <Entity name: 7ec37d10>)
(5 . "323")
(100 . "AcDbEntity")
(67 . 0)
(410 . "Model")
[code]...
I have some multiline attributes that contain strings that are longer than 250 characters. how to empty the attribute using autolisp?
View 4 Replies View RelatedAttached is a block that I use a lot. Originally I had two separate single line text attributes for the "title". I modified it to have a single multiline text attribute instead. I want this attributes text box width to stretch along with the line below it, so that long text strings will automatically adjust to single or multiple lines as necessary and not run off the end of the line. As it stands now I have to stretch the line and then adjust the width of the text box to match.
Also it would be nice if the bulk of the text would stay on the bottom line and only the "overflow" would move up to the next line.
I have a number of drawings that i need to change the revision numbers, insert the date, the reviewer, etc.... I have been doing this manually but it takes heaps of time. Is there an easier way to copy and paste multiline attributes from one block to the same block used in other drawings (each drawings has the same block and attribute titles). One problem is that i cant simply copy the entire block as the drawing number, reviewers, titles etc are different in each drawing.
View 1 Replies View RelatedI am basically trying to determine how many lines are in the mutliline attribute. I have abandoned the idea of directly trying to find the the number of lines and have moved on to trying to fine the height of the multiline attribute. I have included the lisp and sample drawing that will draw a box of the boundingbox around the mutiline attribute.
This block as originally a dynamic block that different visual states. I have tried using the bounding box option on the block itself, however, if there are blocks hidden with the visual state, it will draw the bounding box according to the largest element in dynamic block every time. So I need to determine the height of the multiline attributes instead and adjust the dynamic block accordingly.
I am well aware this has been an issue for awhile and supposedly fixed in 2008 SP1.
But we are running Civil 3d 2013. and still getting this issue.
The Multiline Attributes in our title blocks keep moving themselves randomly upon reentering the drawing.
Any clear cut solution for rectifying this problem?
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
Using AutoCAD Architecture 2009. I recently updated my office's rom tags to use the multiline attributes for several properties. A couple of my officemates are getting an errant behaviour that i am unable to replicate.
- sometimes when using a tag, the multi-line attributes move themselves, by alot. up or down, even change the text alignment. This can happen in constructs and in views.You can see the displacement as soon as you start dropping the tag, the block ghost will be all messed up.
- starting a new view from scratch will make the tags behave normally (a constuct that tags properly can result in a view that does not.)
- if tagging the constructs (i, know, i know), copying out the spaces to a new file, tagging, then copying in the geometry will also fix the tags. if i copy ALL the problem persists. If i remove the tags and purge the styles and drawing, the problem persists.
is this a fluke, or is there a file setting of some sort that my mates have (de)activated?
i have two projects that are working without a hitch, and two that are badly misbehaving.
I use Autcad Architecure 2010 on my computer.
After I created or made a multiline text, the ribbon in autocad is getting all blurry. None of the icons in the ribbon will work (see attached picture).
I always have to shut down Autocad and restart it to continue my work.
I've recently noticed that my multiline text boxes in old drawings have been splitting themselves into multiple multiline text boxes. They aren't exploding into single line text because it won't let me use the convert command to turn them into multiline because they are already multiline.
I know the dimassoc command can be set to a certain value to cause all dimensions to explode but is there some kind of command that could have change itself and is causing this problem?
I am wondering what Block Authoring actions i can use to move my Attribute Definitions up and down in a Dynamic Block. I understand duplication the definitions can get really ugly.
So i want to be able to have a second visibility tab in my block the nwhen i select it my Attribute Definitons insertion point moves to another co-ordinate with in the block.
I have a lot of attribute blocks in my drawing which i want to move them one by one
so , here is what i want to do :
I have numbers (or texts) in my work area and this numbers also exist in my attribute blocks .. i wanna move my attribute blocks with tag name value reference to my specify area if tag name values are matching with text or numbers in this area .. every block will check my selected tag string and will be move on matching text in my work area.
Possible to send attribute data that is in our title block to a schedule that is populated with property set definitions? We are not using the Project Navigator at this time.
View 2 Replies View RelatedI have received drawings from someone else that utilize what I believe to be custom room tags. The tags consist of multiple lines of information e.g. Number, name line 1, name line 2, floor, base, north, south, east, west, occupancy, prog area, room area, etc. As of right now there is information in all of the data boxes as seen in the properties box.
However the only information shown in the drawing area is Number, name, and room area. What I would like to know is how would i keep the room area information, but not show it in the drawing area? Basically I would like to be able to make different pieces of information visible or invisible.
Is it possible to have attributes (annotative text) with a background mask in a block? Our intention is to include text to describe the status (demolition, existing or new) of various equipment.
The drawings themselves (lines, hatchs, etc.) would not be scalable or annotative, but we do want the text included to be annotative.
We normally include a hatch behind text or drawing elements (with a 'ByBlock' color) so we can 'manually' give it a background color of our liking and then scale the block in question. This way, the 'manual background' automatically scales with it.
However, with the annotative way of doing things, our solutions doesn't work anymore because blocks like these ones are now insert at a 1:1 scale and the text included will scale accordingly. I'm looking for a way to add a background mask to an annotative attribute.
I am ACA 2013. I received a file from an equipment company and has these blocks that are huge in file size, so I am cleaning things up on them. Their blocks have multiple layers in them with different colors and linetypes. I see the setbylayer command and it works, but not all the time. On some of the blocks, they have attribute text in them. the individual lines of the attribute are on different layers. I want to keep the info, but set all to layer 0. then I can move it to the block to the layer I want.
another question, is there a way to make an outline of a block? Some of these blocks are so detailed that I want to make a simple outline and then delete the block.
I have stored a few blocks in our library in 2D. They contain attributes such as detail numbers, elevation/sheet numbers, and side attributes for keynotes. But whenever I drag the blocks in now, instead of prompting for the information to be filled out for the attributes it only asks for insertion point and scale and that's it. it inserts the block but no text shows up, not even a default text. There has to be a setting to turn off or on.
View 4 Replies View RelatedI am attempting to create my first Title Block with attribute definition. I am having trouble finding a way to use True Text. My goal is to use Arial Black. The Attribute Definition window provides only 3 text options: Pres, Notes, and Standard. Adjusting the Width Factor does not yield a text that will replace Arial Black. Is there a way to import true text into CAD for this purpose?
View 5 Replies View RelatedWithin a block I have a attribute definition and a textfield which refers to the value of the attribute definition.
The value of the attribute definition displays neatly as it's supposed to but the textfield gets the prefix w0.6000;
This Prefix refers to the textwidth I know that much but I can't get rid of it!
The peculiar thing is that if I don't use the "multiple lines" option in the attribute definition the problem disappears.
I really need to use this option because I wanna apply a textmask to it....
Seems like Multi-View Blocks are like that hot red-head in high school that you really want to get to know until you get to know them.
I made a bunch of blocks for my electrical plans. Annotative symbols for plan view, 3D blocks for model view, and elevation blocks for elevations. I then started creating the MVBs.
Upon insertion the annotative blocks appear super small and the model view blocks scale way up. The model view blocks are not annotative and are not supposed to scale at all. It seems MVBs see any block inside that is annotative as an indication that the entire MVB shall be annotative. Fustrated, I finally found a work-around that is a bit half-arsed:
I made another block as a sort of holder for the annotative symbols that was set to not be annotative and inserted that into the MVB. VOILA! the MVB itself doesn't scale, but the annotative symbol inside the non-annotative block does. This works fine except for one caveat: I can't edit attributes that are in blocks inside of blocks. If I made another block to use in the MVB for the attributes, it would work, so long as I don't make it annotative, which isn't what I want.
So, A) is there a better work-around than the block-in-a-block-in-a-multi-view-block method, or B) Is there a way to access and edit attribute data of sub-blocks inside a MVB?
Maybe my next thread will be about red-headed Multi-View Blocks with carpets that match the drapes.
Edit: Running ACA 2009
I am having a problem with moving a line that is attached at a corner to another, as it moves that line as if I clicked on the intersecting snap point at the end of both lines and dragged it. I want to move or copy the line away, but it somehow is attached to the other, and is quite annoying and impossible to work with without deleting and redrawing lines. I've tried exploding them, but they are not joined in that way, and are not "grouped" (I don't think, because when I did "group" them, it made a box around them and highlighted both lines at the same time). A symbol shows that is two boxes, one an outline and the other solid which is up and to the right. I can't figure out what mode it is in to turn it off!
View 3 Replies View Relatedhave trouble moving doors or windows within a wall?
I am trying to move a door so that the door is flush with a face of wall. The prompts in acad do not match the instructions.
For instance; select door, okay. then from anchor panel select 'reposition within wall', okay a red line appears and prompt to 'select position on the opening'. okay so i click the face or side of door jamb then select a reference point. (guide says select point to measure to) and on and on. Door never moves.
it should be; select door, select reposition in wall, select reference point (interior, exterior, midpoint), select the desired location. Done.
Instead it is select this that and the other , measure from here, select, click.click click.
I am new to the project navigator, I have several projects I would like to move to another computer and I am not sure how to do this. I have searched but must not have used the right words in the search. What is the correct way to move or export these project and import them into the other PC?
View 2 Replies View Related