When will working with multiline attributes get easier? Having to do multiple clicks to get to a place to edit is one thing, but then you have to use multiple clicks to get out of it. Surely Autodesk can make this an easier process. It was great when these were finally added, now they just need to be more user friendly.
View 1 RepliesI was trying to find out, how to change the width factor of multiline attribute and I failed.
The only way was to change the width factor of texstyle the attribute uses.
Is there a way to override this property for a single attribute? And if not, is there some reason for that?
My method creates a attribute, how to a create a multi-line attribute?
using (Transaction trAdding = dbCurrent.TransactionManager.StartTransaction())
{
BlockTable btTable = (BlockTable)trAdding.GetObject(dbCurrent.BlockTableId, OpenMode.ForRead);
string strBlockName = "ATTRBLK" + System.Convert.ToString(blockName);
try
{
if (btTable.Has(strBlockName))
[Code]....
I'm getting a little frustrated with the multiline attribute. Every time a place it in a block and save the file, the tag moves to the left when I re-open the block file or try to insert the block in another file. how to stop the tag from moving? FYI Locking the tags position makes no difference.
View 9 Replies View RelatedI've created tags with text below them. The text is a multline attribute. I save the block with the background mask on.
When I add these blocks to multileader styles, that setting is lost and even after creating a multileader, editing the multiline attribute and turning the mask back on, the setting will not save for some reason.
One very noticeable affect of losing the background mask is that when one is editing the multiline attribute AutoCAD leaves the original text visible and overlaying the text that is updating. This makes it nearly impossible to see the edits one is making. One has to set the background mask every time they edit that multileader if they need to change the text in the mutliline attribute.
Using AutoCAD LT 2010.
I am using a multiple line attribute. I insert the block, fill in the text, and adjust the width of the multi-lines text so the lines are longer and there are fewer of them. I save and close the file, then re-open some time later and the width of the multli-ine attribute has reverted back to a different width (shoter) - I am assuming it is the default width that I set to the attribute. Is there a setting to stop this from happening? Is there something I should do when I create the attirbute?
View 2 Replies View Relatedit's possible to manipulate the vertical line spacing of multiline attributes within a block?
View 0 Replies View RelatedWhen I select a block that contains a multiline attribute my AutoCAD does not display the corner grips of the attribute if its location is "locked" in the block. Is there a setting I can change to show grips in 2012? Apparently a co-worker of mine that uses 2011 has grips when selecting the block.
If I unlock the location I have grips (not the same ones I am used to seeing from mtext though) but I do not want the attribute location unlocked..I was understanding that the multiline attribute was simply an attribute containing an mtext.
significance of extra dxf 1 groups in the entity data of a multiline attribute? I am looking at one for the first time, so I don't know whether or not to expect multiple 1 groups. In the single example I have created there are two and the first one seems to be ignored. Can I count on that being the case all the time? Data for the one I'm looking at follows, and what shows up on the drawing display is only the contents of the second dotted pair with 1 as a key.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
((-1 . <Entity name: 7ec37d18>)
(0 . "ATTRIB")
(330 . <Entity name: 7ec37d10>)
(5 . "323")
(100 . "AcDbEntity")
(67 . 0)
(410 . "Model")
[code]...
I have some multiline attributes that contain strings that are longer than 250 characters. how to empty the attribute using autolisp?
View 4 Replies View RelatedAttached is a block that I use a lot. Originally I had two separate single line text attributes for the "title". I modified it to have a single multiline text attribute instead. I want this attributes text box width to stretch along with the line below it, so that long text strings will automatically adjust to single or multiple lines as necessary and not run off the end of the line. As it stands now I have to stretch the line and then adjust the width of the text box to match.
Also it would be nice if the bulk of the text would stay on the bottom line and only the "overflow" would move up to the next line.
I have a number of drawings that i need to change the revision numbers, insert the date, the reviewer, etc.... I have been doing this manually but it takes heaps of time. Is there an easier way to copy and paste multiline attributes from one block to the same block used in other drawings (each drawings has the same block and attribute titles). One problem is that i cant simply copy the entire block as the drawing number, reviewers, titles etc are different in each drawing.
View 1 Replies View RelatedI am basically trying to determine how many lines are in the mutliline attribute. I have abandoned the idea of directly trying to find the the number of lines and have moved on to trying to fine the height of the multiline attribute. I have included the lisp and sample drawing that will draw a box of the boundingbox around the mutiline attribute.
This block as originally a dynamic block that different visual states. I have tried using the bounding box option on the block itself, however, if there are blocks hidden with the visual state, it will draw the bounding box according to the largest element in dynamic block every time. So I need to determine the height of the multiline attributes instead and adjust the dynamic block accordingly.
I've recently noticed that my multiline text boxes in old drawings have been splitting themselves into multiple multiline text boxes. They aren't exploding into single line text because it won't let me use the convert command to turn them into multiline because they are already multiline.
I know the dimassoc command can be set to a certain value to cause all dimensions to explode but is there some kind of command that could have change itself and is causing this problem?
How to combine more than multiline text in one?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am well aware this has been an issue for awhile and supposedly fixed in 2008 SP1.
But we are running Civil 3d 2013. and still getting this issue.
The Multiline Attributes in our title blocks keep moving themselves randomly upon reentering the drawing.
Any clear cut solution for rectifying this problem?
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
Multiline width issue at edges when fillet is applied,
I wanted to draw a multiline with curved edges and to keep the width (scale) of the multiline the same at these curved edges.
Scenario:
The multiline is drawn say with 20 meters width (screenshot is attached)
The multiline is exploded (screenshot is attached)
The edges are filleted, say with 20 meters radius (screenshot is attached)
Now, when the width of the multiline is measured at the curved edges, then it is found that the width is more than 20 meters! (screenshot is attached)
Then how to have a multiline with same width even at the filleted edges?
How to add a particular annotation for multiple selected multiline texts,In the attached screenshots, all Mtext were selected but couldn’t figure out how to add a particular annotation scale to them!
For example, I wanted all the selected mtext to have the 1:100 as annotation scale but sounds not to work with me.
I sent the following message to autodesk:
Issue: Dynamic Block causes crash
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
I am on vanilla R2014.
I cannot figure out how to get SUBscripts into an attribute, I have searched all over the web to no avail.
Perhaps an alternate way is converting Mtext with subscripts to an attribute? Any routine to convert text to an attribute for use in blocks?
Civil 3D 2014.I want to attach attribute information and/or metadata to my array. Is this possible?
If it is possible, I would also like to be able to explode my array and have my array items acquire the attribute information for exporting later. Can this be done as well?
I'm working in a different department and can't figure out why the attribute box won't open when I insert their title block. I have checked that all the variables attmode, attdia, attreq, filedia, and cmddia are all set to 1 in both drawings. What am I missing? I'm using 2014. I'm attaching the drawing I want to insert.
View 4 Replies View RelatedI have a several drawings from an outside source. There are blocks in the drawing which I can not remove the attributes. I have tried exploding, erasing, and redefining block. This doesn't seem to remove all the attributes. That is I erase all the attritube that I can see while editing in place. When I save new defintion I have it replace existing block.One attribute remains.
I have tried to use Battman and resync. It allows me to remove all the attributes except one.Point is, I would like to keep the current blocks cleaned up in the drawing without having to go to each and put a new block and remove the old. Not sure of the origin of these blocks.I believe they came from an AutoDesk AEC source and may have been XREF into drawing.
I am a user of AutoCAD 2014 plain vanilla. I created a title block for my company which has worked well for a year or so. Recently, I have been experiencing the following. After inputing info like an address, sheet name etc. into an attribute definition everything will be fine. When I go and work on other other pages in paperspace, and then return, I will find that the text has dropped vertically into an area it shouldn't. how to remedy this? Attached is a screenshot.
View 9 Replies View RelatedI have a drawing with text describing equipment. We now want to make an equipment list and would like to export the drawing's text to Excell.
View 1 Replies View RelatedThey have one file xrefed into another but the text is not showing up. It is a block and the text is an attribute - but it is exploded.
I have attached 2 images - the first one - of the original file the second - where it is xrefed into another file with the text missing.
I HAVE ATTRIBUTE TEXT BLOCK IN DRAWING TITLE AND IF I WANT TO ADD ANOTHER TEXT IN SAME ATTRIBUTE BLOCK
HOW CAN I ADD
Is there a way to change the layout tab name to match an attribute in the drawing? For example, I have a block in my title block named REV and an attribute in that black named RevNum, I want my users to be able to edit that block and the layout tab automatically change to match, i.e. if they modify the RevNum attribute to be A i want the layout tab name to change to A. I want this to be transparent to my users normal workflow.
View 2 Replies View RelatedI have a Block that represent a point and has an attribute in order to label the point that I am displaying. According to the scale I can change the size of the point itself but I am having problems changing the size of the Atribute in order to make the label readeble in the scale that I have in drawing. How is possible to chage the Text size of my attribute in the point block so I can read the labels easily?
View 9 Replies View RelatedI have made a dynamic block with attribute text. Everything works fine except the text comes out as larger than the mtext that it was created from. The text height & the width factor are the same since i created the attribute default by copying the mtext. when i close the block the text appears longer than the mtext it was created from.
View 2 Replies View RelatedHow to get columns working in a multi line attribute.
I changed system variable ATTIPE (attribute in place editor) to 1 which added the extra formatting options but the columns button is greyed out. As a work around I just use tab stops but columns would be better if possible.