AutoCAD 2013 :: Remove All Of A Block Attribute
Nov 20, 2013
I have a several drawings from an outside source. There are blocks in the drawing which I can not remove the attributes. I have tried exploding, erasing, and redefining block. This doesn't seem to remove all the attributes. That is I erase all the attritube that I can see while editing in place. When I save new defintion I have it replace existing block.One attribute remains.
I have tried to use Battman and resync. It allows me to remove all the attributes except one.Point is, I would like to keep the current blocks cleaned up in the drawing without having to go to each and put a new block and remove the old. Not sure of the origin of these blocks.I believe they came from an AutoDesk AEC source and may have been XREF into drawing.
View 5 Replies
ADVERTISEMENT
May 30, 2013
I have 2 drawings with the following content :
Drawing 1 : Contains tree blocks that have a specific scale dependant on the tree size
Drawing 2 : Contains a block with just a point and attribute data about the tree (name, size etc.)
This block is approximatly at the same location as the tree block (0,1 m precision)
Problem I want to join these two items together. In other words, in the tree block that is scaled correctly i want the attribute data with the name, size etc. These blocks don't have a corresponding unique number or something like that.
View 2 Replies
View Related
Jun 17, 2013
I need a lisp sub-function that can empty all attributes of a specified dynamic block. The idea being that the specified block contains data that changes often and in order to repopulate the block's attributes with new data to replace the old I wish to just blank out the old data first, because it's possible that the new data may not utilize as many attributes and all of the old data must be removed.
The thing is the block I'm after is on several layouts, CTABs and they all need to be wiped clean.
View 9 Replies
View Related
Aug 31, 2012
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
View 1 Replies
View Related
Jan 10, 2014
I'm working in a different department and can't figure out why the attribute box won't open when I insert their title block. I have checked that all the variables attmode, attdia, attreq, filedia, and cmddia are all set to 1 in both drawings. What am I missing? I'm using 2014. I'm attaching the drawing I want to insert.
View 4 Replies
View Related
Dec 30, 2013
I HAVE ATTRIBUTE TEXT BLOCK IN DRAWING TITLE AND IF I WANT TO ADD ANOTHER TEXT IN SAME ATTRIBUTE BLOCK
HOW CAN I ADD
View 1 Replies
View Related
Nov 10, 2013
Is there a way to create an attribute or MTEXT in a block where part of it is User defined and the other part is constant?
e.g.
"AUTOCAD = 12345 LAYERS"
Where "AUTOCAD =" and "LAYERS" are constant
and
"12345" is the user defined part.
The reason why I would like this is because i want to be able to Middle Center Justify the text and if i were to create 3 separate texts then it wouldn't be good (2 texts and 1 attdef)
View 5 Replies
View Related
Feb 19, 2013
I must be using the Enhanced attribute editor the wrong way. Every time I double click the attribute block the enhanced attribute editor opens the dialog box and I have to resize it so a can see all my tags. Then I have to click the tag I want to change then click the value to change it. To change a different tag I have to repeat that process over and over. It makes attributes a complete waste of time. It’s faster to change Mtext or Dtext. I must be doing something wrong. Is there a way to get the dialog box in the image to pop up when I double click the attribute block?
View 3 Replies
View Related
Apr 20, 2012
Every time I attempt to insert a block with an attribute in it from my tool pallet I get the error FATAL ERROR: Unhandled Acess Violation Reading 0x0020 Exception at 4260af08u.
If I insert a block without attributes it works fine. I even tried building a block in 2013 and then inserting it from the toolpallet, still fatal error's out.
View 6 Replies
View Related
Oct 17, 2013
I'm trying to create a dynamic block that uses a parameter and an attribute definition to determine the diameter of a circle in that block. I plan to export GIS points with diameter in the attribute table into a CAD file with the block definition. I'm having trouble figuring out how to set up the parameters to read to attribute definition and adjust the circle diameter. Using AutoCAD 2013
View 5 Replies
View Related
Aug 22, 2012
Did Autodesk remove OVERKILL functionality from the block editor?
View 1 Replies
View Related
Jul 3, 2012
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
View 2 Replies
View Related
Oct 5, 2012
What I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies
View Related
Aug 13, 2012
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
View 5 Replies
View Related
Sep 6, 2012
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
View 9 Replies
View Related
Feb 12, 2012
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
View 3 Replies
View Related
Nov 8, 2013
Is there a way that I can create a block with text ('A') and when I insert the block and populate the block another block block will update also? I am wanting to create a block for x-sec flags, and detail callouts that update their detail titles.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 6 Replies
View Related
Feb 28, 2012
Is it possible to create a text block attribute in part sketch mode?
View 2 Replies
View Related
Jun 10, 2013
I'm creating a block with a block attribute.
In the blockeditor I can change the draworder so the attribute is partly under some lines. But the draworder in the blockeditor of the attribute doesn't work in the normal modelspace; the blockattribute is allways on top.
View 9 Replies
View Related
Feb 2, 2012
I need to open a drawing and read the block attributes and find a block with name "ABC" and attribute named "Text" in "ABC" block. for which i am using the below code which is working perfectly.
Try AcadApp = GetObject(, "AutoCAD.Application") Catch ex As Exception AcadApp = CreateObject("AutoCAD.Application") End Try AcadApp.Visible = True Try AcadDoc = AcadApp.Documents.Open(DWGName, True) RichTextBox1.AppendText(" - Opened File Successfully" & vbCrLf) Me.Refresh() Catch ex As Exception RichTextBox1.AppendText(" - Can not Open this Drawing" & vbCrLf) Me.Refresh() Exit Function End Try Dim Obj As Object For Each Obj In AcadDoc.ModelSpace If Obj.ObjectName = "AcDbBlockReference" Then RibbonLabel1.Text = "Find Block: " & Obj.Name Me.Refresh() ' Check for attributes. If Obj.HasAttributes Then Dim AttList As Object Me.Refresh() If Obj.Name.ToString.ToLower = "abc" Then ' Build a list of attributes for the current block. AttList = Obj.GetAttributes ' Cycle throught the list of attributes. For _i = LBound(AttList) To UBound(AttList) ' Check for the correct attribute tag. If AttList(_i).TagString = "Text" Then return AttList(_i).TextString.ToString End If Me.Refresh() End If Next End If End If End If Next Obj
But i want to know whether is there any way to get the block named "ABC" directly without looping through all the objects.
View 2 Replies
View Related
Feb 21, 2012
I have a block content many attribute. When I'm create the block whit this many attribute, the order of this attribute is not properly. I know autocad have a command to class this many attribute in order but i search it and i don't know where is it.
View 1 Replies
View Related
Apr 19, 2011
I need to get the Attribute Collection of a named block which is not been placed in the drawing, but it does exist
Dim paaltype As String
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurDb As Database = acDoc.Database
Dim acDocEd As Editor = acDoc.Editor
Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction()
paaltype = "paal01"
Dim acBlkTbl As BlockTable
acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId, OpenMode.ForRead)
If acBlkTbl.Has(paaltype) Then
‘block exist, how to get the attributecollection
End If
acTrans.Dispose()
End Using
View 2 Replies
View Related
Sep 10, 2012
How can I add an attribute to a block without the other attributes to move from their position. With the ATTSYNC belongs unfortunately not because the old attributes moved back to the original places that I will not.
View 9 Replies
View Related
May 9, 2011
I wan't to append a new attribute to a new block. But I get an error that there is no database. The loaded file has no attributes
Dim mDialog As New frmPaalDefinitie()
For Each item In lvPalen.Items
mDialog.tsPaal.Items(item.imageindex).enabled = False
Next
mDialog.ShowDialog()
If mDialog.DialogResult <> Windows.Forms.DialogResult.OK Then Exit Sub
[Code] ........
View 4 Replies
View Related
Aug 9, 2012
I know how to get/set attribute within loop at block's AttributeCollection.But I'm wonder if I can set value for specified attribute without loop. Or I always have to iterate on each attribute in block's AttributeCollection?
View 9 Replies
View Related
Apr 20, 2011
How to access the BTR, read and write BRef, attDef, AttRef etc. But this has me stumped. There are a few different examples but can’t find anything that works and don't know why.
I have inserted a block in modelspace, I have the BlockRefID and now want to change its attribute values. This finds the attributes tags but doesn’t write the sValue. Why it isn’t writing the value to the block.
Public Sub ChangeAttributeValue(ByVal BlockRefID As ObjectId, ByVal sTagName As String, ByVal sValue As String)
Dim doc As Document = Application.DocumentManager.MdiActiveDocument
Dim db As Database = doc.Database
Dim tr As Transaction = db.TransactionManager.StartTransaction()
Dim br As BlockReference = DirectCast(tr.GetObject(BlockRefID, OpenMode.ForWrite), BlockReference)
[code]........
View 7 Replies
View Related
Jan 8, 2014
Im running AC LT 2012 version #F.51.M.310 on a Mac Pro 3,1 and a MacBook Pro 6,2. The Mac Pro 3,1 is not a supported machine. I have no issues on the MBP 6,2.
It seems to run fine on the MP 3,1 except one very important issue. When I open a block attribute editor Dialogue then cancel or save, it crashes AutoCAD. If I use the Property Inspector instead it is fine. Double clicking a block to edit its text attributes is a VERY hard habit to break.
Mac tends to fix things through updates in the App Store.
Is this the most up to date AC LT 2012? I have yet to find that version # listed anywhere. Is this an issue of just being an unsupported machine? I have been searching for weeks to resolve/identify this problem to no avail.
View 2 Replies
View Related
Mar 21, 2013
How to get attributes from block located at external drawing?
View 2 Replies
View Related
Oct 27, 2012
I'm drawing a block library for myself. I would like to create block with one attribute value who will be repeated few time in the block (in mtext or attribute). As example, here is the original block (I wrote only the text of the block):
Ix.0
Ix.1
Ix.2
where x is a variable e.g. attribute
Then when I insert the block, attribute ask for value. Then if I type 2 I want to have
I2.0
I2.1
I2.2
If I type 3:
I3.0
I3.1
I3.2
View 0 Replies
View Related
Jul 18, 2011
It is possible to convert a block like below straight into an attribute without actually creating the attribute manually?
View 7 Replies
View Related
Oct 2, 2013
I have a requirement to create a block with a few attributes, but the attributes require a bit of composition behind the scenes. Here's an abstract example.
I need a block that represents a computer's identity. Each computer has 2 references that need to result in attributes that I can extract. One attribute is a unique reference across the project, and the other attribute is a room reference, and many computers can be in the same room.
Here are some example references.
Computer A
Unique Reference: DF.SALES.01
Room Reference: DG.SALES.07
Computer B
Unique Reference: DF.SALES.02
Room Reference: DG.SALES.07
Computer C
Unique Reference: DF.SALES.03
Room Reference: DG.SALES.07
Computer D
Unique Reference: DF.ADMINISTRATION.01
Room Reference: DG.ADMINISTRATION.02
Computer E
Unique Reference: DF.ADMINISTRATION.02
Room Reference: DG.ADMINISTRATION.02
As you can see from the above, the 'common' part for a computer is the middle 'SALES' or 'ADMINISTRATION' part, which 'technically' only needs to be put in/typed in by the user once for each computer. I need to automate this process to reduce user input error, such that they only enter 'SALES' or 'ADMINISTRATION' once and don't end up creating the below, which would be invalid.
Computer F
Unique Reference: DF.RECEPTION.09
Room Reference: DG.SALES.07
Thus I imagine I need a third property/field/attribute to specify 'room', and then formulate the Unique Reference and Room References, using this 'room' part in the middle.
The end goal here is that I need to be able to extract the above two references for each 'computer/block' and get them into Excel, and I need to be able to modify the 3 properties (room, unique reference and room reference) quickly, ideally using something like EATTEDIT, which is how we have edited attributes in the past.
The use case above is abstracted, it's actually not for computers at all but I figured it would make more sense than complicating it with the actual application!
View 5 Replies
View Related
