AutoCAD 2013 :: Create Attribute / Mtext In Block
Nov 10, 2013
Is there a way to create an attribute or MTEXT in a block where part of it is User defined and the other part is constant?
e.g.
"AUTOCAD = 12345 LAYERS"
Where "AUTOCAD =" and "LAYERS" are constant
and
"12345" is the user defined part.
The reason why I would like this is because i want to be able to Middle Center Justify the text and if i were to create 3 separate texts then it wouldn't be good (2 texts and 1 attdef)
View 5 Replies
ADVERTISEMENT
Jul 16, 2013
I have a dynamic block.
It has length and width stretch actions activated by grips. (Works fine).
It has an attribute for the user to type in a height value. (attribute insert box appears on block insert and when double clicking block).
It has Mtext "worktop [field] High" the [field] is looking at the attribute value so in theory should return the value the user types. But no only ---- shows. regen/regenall/battman fieldeval 31
Am I missing something i have pointed the field to tag/prompt as test and they show up in the mtext.
View 5 Replies
View Related
Sep 28, 2013
I have made a dynamic block with attribute text. Everything works fine except the text comes out as larger than the mtext that it was created from. The text height & the width factor are the same since i created the attribute default by copying the mtext. when i close the block the text appears longer than the mtext it was created from.
View 2 Replies
View Related
May 30, 2013
I have 2 drawings with the following content :
Drawing 1 : Contains tree blocks that have a specific scale dependant on the tree size
Drawing 2 : Contains a block with just a point and attribute data about the tree (name, size etc.)
This block is approximatly at the same location as the tree block (0,1 m precision)
Problem I want to join these two items together. In other words, in the tree block that is scaled correctly i want the attribute data with the name, size etc. These blocks don't have a corresponding unique number or something like that.
View 2 Replies
View Related
Mar 16, 2012
I am using M Text Attributes to store imperial lengths in the drawing, feet inches and fractions (stacked). When I read back the Text String property which, is the M text Attribute.Contents parsed, I am having problems because the parser does not add a space between the inch and the fraction. So, is there any setting that could be used to tell the parser to add the space between the inch and the fraction?
View 1 Replies
View Related
Aug 31, 2012
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
View 1 Replies
View Related
Oct 27, 2012
I'm drawing a block library for myself. I would like to create block with one attribute value who will be repeated few time in the block (in mtext or attribute). As example, here is the original block (I wrote only the text of the block):
Ix.0
Ix.1
Ix.2
where x is a variable e.g. attribute
Then when I insert the block, attribute ask for value. Then if I type 2 I want to have
I2.0
I2.1
I2.2
If I type 3:
I3.0
I3.1
I3.2
View 0 Replies
View Related
Apr 18, 2013
I am wondering if it is possible to create some sort of block which will detect the angle it has been rotated to and present this angle as a text? For eg. to calculate the superelevation and present it as a multileader with 3.00% above it.
View 2 Replies
View Related
Jan 10, 2014
I'm working in a different department and can't figure out why the attribute box won't open when I insert their title block. I have checked that all the variables attmode, attdia, attreq, filedia, and cmddia are all set to 1 in both drawings. What am I missing? I'm using 2014. I'm attaching the drawing I want to insert.
View 4 Replies
View Related
Nov 20, 2013
I have a several drawings from an outside source. There are blocks in the drawing which I can not remove the attributes. I have tried exploding, erasing, and redefining block. This doesn't seem to remove all the attributes. That is I erase all the attritube that I can see while editing in place. When I save new defintion I have it replace existing block.One attribute remains.
I have tried to use Battman and resync. It allows me to remove all the attributes except one.Point is, I would like to keep the current blocks cleaned up in the drawing without having to go to each and put a new block and remove the old. Not sure of the origin of these blocks.I believe they came from an AutoDesk AEC source and may have been XREF into drawing.
View 5 Replies
View Related
Dec 30, 2013
I HAVE ATTRIBUTE TEXT BLOCK IN DRAWING TITLE AND IF I WANT TO ADD ANOTHER TEXT IN SAME ATTRIBUTE BLOCK
HOW CAN I ADD
View 1 Replies
View Related
Mar 16, 2012
i'm relatively new to lisp routines. I've been trying to create a routine that will create a custom block with attribute with an option to select which drawing border size is being used. This is what i've got so far;
(defun c:NEW_REV_NOTE ()
(PRINC "
Drawing Size:")
(SETQ Paper_Size (GETSTRING "
[A1/A3] <A1>: "))
(IF (= Paper_Size "A1")
[code]....
I'm going wrong at the moment I get an error message when I try to load the file "; error: syntax error".
View 4 Replies
View Related
Feb 19, 2013
I must be using the Enhanced attribute editor the wrong way. Every time I double click the attribute block the enhanced attribute editor opens the dialog box and I have to resize it so a can see all my tags. Then I have to click the tag I want to change then click the value to change it. To change a different tag I have to repeat that process over and over. It makes attributes a complete waste of time. It’s faster to change Mtext or Dtext. I must be doing something wrong. Is there a way to get the dialog box in the image to pop up when I double click the attribute block?
View 3 Replies
View Related
Oct 24, 2013
I'm looking to draw a mleader (with a leader style CLL_Anno) using the block basepoint as insertion point, read two attributes from that block and use those as the text for the mleader. for example: "attribute - attribute". Attached is dwg with blocks with attributes and leader style. (Block is "Trees", Attributes are "V_SPECIES" "V_DBH_DIM")
View 2 Replies
View Related
Apr 20, 2012
Every time I attempt to insert a block with an attribute in it from my tool pallet I get the error FATAL ERROR: Unhandled Acess Violation Reading 0x0020 Exception at 4260af08u.
If I insert a block without attributes it works fine. I even tried building a block in 2013 and then inserting it from the toolpallet, still fatal error's out.
View 6 Replies
View Related
Oct 17, 2013
I'm trying to create a dynamic block that uses a parameter and an attribute definition to determine the diameter of a circle in that block. I plan to export GIS points with diameter in the attribute table into a CAD file with the block definition. I'm having trouble figuring out how to set up the parameters to read to attribute definition and adjust the circle diameter. Using AutoCAD 2013
View 5 Replies
View Related
Jul 3, 2012
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
View 2 Replies
View Related
Oct 5, 2012
What I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies
View Related
May 25, 2011
I have an attribute definition and I need to add its value to an mtext. I added it in mtext insert field it is ok, every thinks work fine it is only needs a regen but it is not a problem.
The problem is when my mtext and att in a block regen does not work in model space, I had to enter block and regen. Is there any way to do it without entrance in block editor?
I attached a simple example.
View 1 Replies
View Related
Nov 26, 2013
I basically have a block with two text attributes which they are the same but in different positions.
When you double click on the block I don't want to enter "A" as the attribute value twice. I just want to type "A" one time and automatically receive it on the other position as "A" too.
Basically it is Detail(A-A) as in the following block.
A-------------A
View 5 Replies
View Related
May 2, 2012
When I select a block that contains a multiline attribute my AutoCAD does not display the corner grips of the attribute if its location is "locked" in the block. Is there a setting I can change to show grips in 2012? Apparently a co-worker of mine that uses 2011 has grips when selecting the block.
If I unlock the location I have grips (not the same ones I am used to seeing from mtext though) but I do not want the attribute location unlocked..I was understanding that the multiline attribute was simply an attribute containing an mtext.
View 2 Replies
View Related
Dec 13, 2013
I'm having issues with updating an MTEXT attributes value using lisp.
If I insert my block (this is a titleblock) and run my lisp routine the MTEXT attribute updates fine. Once I edit the MTEXT attribute with the MTEXT editor, and then run my lisp routine again, the MTEXT attribute will not update anymore. All the single line (DTEXT) attributes update fine. The lisp routine I created has worked for years...this is the first time I've tried it with an MTEXT attribute.
View 5 Replies
View Related
Dec 10, 2012
Is it possible to create 3D dynamic block and export dimension data ? in detail I would like to create a pipe block, use it in a dwg with different length and export data in order to know sum of all blocks with different length.
As alternative, In case 3d dynamic block is not feasible, is it possible to export data to calculate dimension of 3D object?
View 4 Replies
View Related
Feb 12, 2013
I want to create a dynamic block that as I select my pick point to move it over it stretches the box, however at the same time it arays 2 other lines at the same time. The trick is I need the 2 lines that array to renceter them self within the overall box thats being strtched. To put this in exact teerms I'm looking to create a dynamic block of a reinforced concrete slab that you can stretch to the length you want and at teh same time the reinforcing sysmbeol (----- X-----) will array itself and recenter. Is this possible to do?
View 9 Replies
View Related
Aug 13, 2012
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
View 5 Replies
View Related
Sep 6, 2012
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
View 9 Replies
View Related
Feb 12, 2012
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
View 3 Replies
View Related
Nov 8, 2013
Is there a way that I can create a block with text ('A') and when I insert the block and populate the block another block block will update also? I am wanting to create a block for x-sec flags, and detail callouts that update their detail titles.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 6 Replies
View Related
Feb 28, 2012
Is it possible to create a text block attribute in part sketch mode?
View 2 Replies
View Related
Jun 5, 2012
I'm having some difficulty in deciding how to go about creating a title block for my drawings. I have attempted to create the title block with Document fields from the drawing properties custom properties tab, and creating the same fields with information from the Sheet / Sheet Set fields. Both title blocks used attributes inside the block to house the fields, and both were .dwt files.
Is there a way to take the properties from the .dwt drawing into a newly created drawing, or is there a way to link custom sheet set properties with a newly created sheet set? The main goal is to not have the user manually input multiple custom fields either in the drawing properties or the sheet set manager of the new drawing.
View 1 Replies
View Related
Jul 23, 2013
Basically, what I want to do is create a block, such as a piping elbow, that will allow me to click on different angles upon insertion and have it match that angle.
Assuming those gray dots represent the elbow block, which actions do I need to use in the block to have my elbow block match different angles as shown.
View 3 Replies
View Related
