I basically have a block with two text attributes which they are the same but in different positions.
When you double click on the block I don't want to enter "A" as the attribute value twice. I just want to type "A" one time and automatically receive it on the other position as "A" too.
Basically it is Detail(A-A) as in the following block.
A-------------A
I am using M Text Attributes to store imperial lengths in the drawing, feet inches and fractions (stacked). When I read back the Text String property which, is the M text Attribute.Contents parsed, I am having problems because the parser does not add a space between the inch and the fraction. So, is there any setting that could be used to tell the parser to add the space between the inch and the fraction?
View 1 Replies View RelatedI have made a dynamic block with attribute text. Everything works fine except the text comes out as larger than the mtext that it was created from. The text height & the width factor are the same since i created the attribute default by copying the mtext. when i close the block the text appears longer than the mtext it was created from.
View 2 Replies View RelatedI have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View RelatedI have a block which is a simple rectangle with a height and width attributes that when I edit, change or update the height and width attributes I want the rectangles height and width to change as well.
I know I can go backwards using fields and the attributes would show the stretched length and width but is it possible to go the other way?
I have an attribute definition and I need to add its value to an mtext. I added it in mtext insert field it is ok, every thinks work fine it is only needs a regen but it is not a problem.
The problem is when my mtext and att in a block regen does not work in model space, I had to enter block and regen. Is there any way to do it without entrance in block editor?
I attached a simple example.
When I select a block that contains a multiline attribute my AutoCAD does not display the corner grips of the attribute if its location is "locked" in the block. Is there a setting I can change to show grips in 2012? Apparently a co-worker of mine that uses 2011 has grips when selecting the block.
If I unlock the location I have grips (not the same ones I am used to seeing from mtext though) but I do not want the attribute location unlocked..I was understanding that the multiline attribute was simply an attribute containing an mtext.
Is there a way to create an attribute or MTEXT in a block where part of it is User defined and the other part is constant?
e.g.
"AUTOCAD = 12345 LAYERS"
Where "AUTOCAD =" and "LAYERS" are constant
and
"12345" is the user defined part.
The reason why I would like this is because i want to be able to Middle Center Justify the text and if i were to create 3 separate texts then it wouldn't be good (2 texts and 1 attdef)
I'm having issues with updating an MTEXT attributes value using lisp.
If I insert my block (this is a titleblock) and run my lisp routine the MTEXT attribute updates fine. Once I edit the MTEXT attribute with the MTEXT editor, and then run my lisp routine again, the MTEXT attribute will not update anymore. All the single line (DTEXT) attributes update fine. The lisp routine I created has worked for years...this is the first time I've tried it with an MTEXT attribute.
I have a dynamic block.
It has length and width stretch actions activated by grips. (Works fine).
It has an attribute for the user to type in a height value. (attribute insert box appears on block insert and when double clicking block).
It has Mtext "worktop [field] High" the [field] is looking at the attribute value so in theory should return the value the user types. But no only ---- shows. regen/regenall/battman fieldeval 31
Am I missing something i have pointed the field to tag/prompt as test and they show up in the mtext.
I've got hundreds of files to convert.
In VBA, how can I batch convert field attributes in blocks to text attributes while retaining the blocks? Is there a simple way to univerally convert them all at onceusing VBA? The plotted values for the fields must be retained, too.
Explode will not retain the value of the field.
Burst will not work as it explodes the blocks as well.
You can right-click on the field and slelct "Convert to text" from the RCM. So I know that the process exists within CAD, just need to batch the process for a quantity of DWGs at a time - in VBA.
When I insert text with either the TEXT command or MTEXT command, the text is displayed mirrored. This doesn't seem to have anything to do with the MIRRTEXT variable because that is used when I'm actually mirroring the text. In my case, the text is mirrored as soon as I insert it. How can I get it back to normal? Is there a variable I'm missing?
I'm using AutoCAD LT 2012 .
3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error. The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
I’m playing round with a loop but how to achieve my need..He had a 3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error.
The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
;Starting lisp program...(defun C:REDtext ();Creating Layers (if non existant)...(command "layer" "m" "TEKST-1.5mm" "lt" "continuous" "" "c" "1" "" "");Memorising previous layer...(setq MYOLDLAYER (getvar "clayer"));Setting requierd layer...(COMMAND "LAYER" "SET" "TEKST-1.5mm" "");Setting variable "MYHEIGHT" to "DIMSCALE" x 2...(setq myheight (* 2 (getvar "DIMSCALE" )));Requesting and storing usser defind point...(setq MYPOINT (getpoint "Start punt :")); Requesting and storing user defind text...(setq MYTEXT (getstring T "Nieuw tekst :"));Placing text...(command "text" MYPOINT MYHEIGHT "0" MYTEXT); Restoring previous layer...(setvar "clayer" MYOLDLAYER);Closing lisp program...)
I'm currently working with AutoCAD Civil 3D Land Desktop Companion. The drawing has hundreds of callouts for different elements all over the site. The callouts are in form of a block, with a number inside. The number corresponds to a notes page which lists each detail in chronological order. (nothing new there)
Due to an expanding and shifting job site, notes have been added and deleted. The problem is now we have to go back through and update all the callout blocks. For example: We have 75 notes in our list, if note number 3 changes or is deleted, we need to go through and change all the numbers in all the blocks to reflect the change to the list.
Is there a way to link blocks to an mtext list? or possibly a spreadsheet?
I have a user that wants to be able to either link dimensions to other dimensions, such as a ref dim to a live dimension or while inserting text in a note on the drawing to be able to list a dimension within that text string to a dimension of the part so as the part updates, the dimension in the text sting updates.
View 9 Replies View RelatedI have a little knowledge of AutoCAD and I do a lot of reports using only AutoCAD, each sheet has a border on it with the project info, no., etc. Is there a way we can link the text blocks in page 1/layout 1 to the other pages/layouts so I don't have to go to each layout and edit the text block individually? Also, i did not draw the template so as to how it was constructed i do not know.
View 1 Replies View RelatedIs it possible to link text to each other through visibility states without creating a block within the DB? I have 2 visibility states. Right Section, and Left Section. All notes and text stays the same, geometry is the only thing that mirrors between states.
The hope is that when I update the text on the "Right Section" state, that the same text on the "Left Section" state automatically updates with what I did on the "Right Section".
I solved this by creating multiple blocks within the DB. That works great, however there HAS to be an easier way to do this.
I am creating a border and making it attributed. I have the drawing number showing up in the title block and in the opposite corner of the page. I want to link the two somehow so that when one is edited the other automatically changes to match. Is this possible to do?
View 6 Replies View RelatedHow to convert "TEXT" to "MTEXT". I inherited a bunch of drawings and want to convert some of the text to a particular font. Since many of the annotations are in TEXT, I haven't been able to find a way to change the font. I can change the style in Properties, but not the font.
View 9 Replies View RelatedI am having trouble creating 3D text using the mtext->txtexp->extrude method. In particular, the number "4" breaks the extrude, which returns:
Command: extrude
Current wire frame density: ISOLINES=8, Closed profiles creation mode = Solid
26 found
Cannot sweep or extrude a self-intersecting curve.
1 object removed from selection set.
I have tried most of the available True-Type fonts, for the text but all give the same error. I can edit the polyline generated by txtexp by hand to remove the problem, but I am trying to automate the process. How to get this to work?
[Software version: AutoCAD 2012 in Windows]
Recently i came to know about LISP called INCREMENT it is so useful. But i have small problem with that It Increments only in X or Y direction or according to UCS. I am looking for a command which can increment along path. In my drawigns many numbers they are in a order by room wise, i have drawn a path on numbers so number should sort as per path direction..i have tried with ALTEXT LISP but iam not getting it is not corting my numbers along path.]
View 5 Replies View RelatedI'm using 2007 LT. I Would like to explode a block with the attribute text remaining as text.
View 9 Replies View RelatedTool to combine multiple pieces of Mtext into a single Mtext with paragraphs?
View 9 Replies View RelatedI am doing my general notes
I would like the top text to be larger and a different text style than the next text can this be done
for example a title of times new roman .08
and the rest of the notes to be simplex .06
( know its not simplex but that wasnt an option)
I have a whole bunch of labels that are single line text that I want to convert to Mtext. I have been using the Express Tools TXT2MTXT command but that only works on one label at a time. If I select all the labels at once using this command it gives me one long Mtext string. Is there a way to convert all of the labels to mtext, but still maintaining individual entities?
View 5 Replies View RelatedI discovered the TXT2MTXT command and how wonderful it is, but there is one thing missing. Is it possible to change multiple texts, but separately WITHOUT having to re-issue the command? I've experimented with some of the in command options, but unless I'm missing something, nothing seems to work.
Preferably, I would like it to work like the FILLET -> Multiple command, so I could select a group of texts, convert them then select another group etc, but the 'multiple' option in TXT2MTXT does not work in such a way.
I am using mtext and would like to put the ruler over the top of the text, not underneath it how do I change this.
View 4 Replies View RelatedI am having issues with text size when I attempt to change the text size in MTEXT. It is set to copy the last size I used but when I need to edit the size, it multiplies what I enter by 8 and turns inches into feet. In other words, I try to resize 6" to 3". The text editor will then multiply 3" x 8 and size the text to 24 feet.
View 9 Replies View RelatedWhenever I enter the MTEXT editing function, then type a letter on any given line of text, that line rotates to the world UCS. This makes typing almost impossible, as the overlapping text can't be read clearly.
I'm using AutoCAD 2013 for Mac and looking at my drawing with a rotated UCS.
I am looking for a solution regarding mtext placeholders that are of extreme lengths compared to the actual text length. Is there a solution to make it more or less the same length as the text?
View 6 Replies View RelatedFirstly, I'm using ZWCAD which should be identical to AutoCAD but who knows...
One of the layers is in red, but when I plot the file, all the lines are red (which is OK) and the text is black... what am I supposed to do to keep the text in red?
The same happens when I export the CAD file to PDF.