I have a little knowledge of AutoCAD and I do a lot of reports using only AutoCAD, each sheet has a border on it with the project info, no., etc. Is there a way we can link the text blocks in page 1/layout 1 to the other pages/layouts so I don't have to go to each layout and edit the text block individually? Also, i did not draw the template so as to how it was constructed i do not know.
View 1 RepliesI'm currently working with AutoCAD Civil 3D Land Desktop Companion. The drawing has hundreds of callouts for different elements all over the site. The callouts are in form of a block, with a number inside. The number corresponds to a notes page which lists each detail in chronological order. (nothing new there)
Due to an expanding and shifting job site, notes have been added and deleted. The problem is now we have to go back through and update all the callout blocks. For example: We have 75 notes in our list, if note number 3 changes or is deleted, we need to go through and change all the numbers in all the blocks to reflect the change to the list.
Is there a way to link blocks to an mtext list? or possibly a spreadsheet?
Is it possible to link text to each other through visibility states without creating a block within the DB? I have 2 visibility states. Right Section, and Left Section. All notes and text stays the same, geometry is the only thing that mirrors between states.
The hope is that when I update the text on the "Right Section" state, that the same text on the "Left Section" state automatically updates with what I did on the "Right Section".
I solved this by creating multiple blocks within the DB. That works great, however there HAS to be an easier way to do this.
Since it's a snow day here I have some time to work on some office stuff. I've created my new template now I want to update my blocks. Because I have to place blocks that show a direction for operation I have created 4 blocks of the same symbol-up, down, left, right. I do this because these blocks have text with them that needs to be orientated to the layout (otherwise I get a nasty letter back from the fire marshal). Now for the text that is constant I just use a annotative text style and have the text match the layout but the text that is an attribute I'm not sure if that can be annotative and match the layout as well.
View 9 Replies View RelatedIs it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines.
I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
I need to know if there is a way to link an attributed F-N bubble with qty's to the BOM. This is for electrical wiring diagrams for aircraft. So I have serveral part numbers to a BOM, but no real accurate way of finding total quantities other than manually going though the drawing.
View 2 Replies View RelatedWhat I would like to do is find a way to use a dynamic block, which has already been created, and once I put in the proper length, speed, type of conveyor, etc., it will automatically update an excel spreadsheet, for example a power estimate, or cost estimate sheet. Is this possible, if so, what is the quickest, and easiest way to do this?
Also, what formula would I use in excel to link back to the DWG?
I work at a machine shop and have a Dynamic Block setup with quite a number of Blocks in it where I can choose whichever tooling I am working with to place into a drawing.
I am also Data-Linking parts of the drawing to Excel that has information fields to be updated in the drawing for these same toolings.
I would like to setup my drawing so that when I update the data links from the Excel spreadsheet the Dynamic Block I mentioned will also be automatically updated and display the appropriate block drawing for the tooling retrieved from Excel.
I have a block which is a simple rectangle with a height and width attributes that when I edit, change or update the height and width attributes I want the rectangles height and width to change as well.
I know I can go backwards using fields and the attributes would show the stretched length and width but is it possible to go the other way?
I have created d/blocks for my different pipe sizes i.e one block with a dropdown to select the different sizes and have done the same for my flanges. now how do I link / insert the flange d/block to the piping block so that I can export the information into a material list later on.
View 1 Replies View RelatedI have inserted blocks into my model space, however when I flick to my layout they dissappear. Also when I pulled a table in from another drawig directly onto my layout the blocks inserted in that dissappear also.
View 4 Replies View RelatedI have a user that wants to be able to either link dimensions to other dimensions, such as a ref dim to a live dimension or while inserting text in a note on the drawing to be able to list a dimension within that text string to a dimension of the part so as the part updates, the dimension in the text sting updates.
View 9 Replies View RelatedI basically have a block with two text attributes which they are the same but in different positions.
When you double click on the block I don't want to enter "A" as the attribute value twice. I just want to type "A" one time and automatically receive it on the other position as "A" too.
Basically it is Detail(A-A) as in the following block.
A-------------A
Every time I try to update blocks with attributes of a given layout, this only updates the last active layout. example:
I have three layouts: Layout1, Layout2 and Layout3
layout of the three blocks I would need to update the reference but I can Layout1 default that always takes the last active layout. In the following paper space specific code, but as it would to tell a particular layout.
Private Sub UpdateAttributesInDatabase(ByVal db As Database, ByVal blockName As String, ByVal attbName As String, ByVal attbValue As String) Dim psId As ObjectId Dim tr As Transaction = db.TransactionManager.StartTransaction() Using tr Dim bt As BlockTable = DirectCast(tr.GetObject(db.BlockTableId, OpenMode.ForRead), BlockTable) psId = bt(BlockTableRecord.PaperSpace) tr.Commit() End Using UpdateAttributesInBlock(db, psId, blockName, attbName, attbValue) End Sub
When I start the layoutwizard and proceed to the insert title block the only choice I have is none. I have several title blocks created and cannot remember where to tell Cad to look. I just setup a new PC and installed AutoCad 2011.
View 9 Replies View Relatedwhen I insert a block that is made up of different layer lines and shapes then they only show up in the model tab. The other layouts I have won't show the blocks even though the same layers are turned on and unfrozen in these other layout viewports just like the model space. It's looking like trying to use multilayer dynamic blocks will be pretty useless unless they work in every layout viewport and not just in model space.
View 5 Replies View RelatedIs it possible to count blocks in either the model space or in each layout? Would be very useful for fire alarm design, cause authorities require exact counts of devices.
View 9 Replies View RelatedI am creating a border and making it attributed. I have the drawing number showing up in the title block and in the opposite corner of the page. I want to link the two somehow so that when one is edited the other automatically changes to match. Is this possible to do?
View 6 Replies View RelatedI have AutoCAD 2013 and usially use in my work dynamic blocks with wipeout, e.g. valves, pumps and others.
So, few days ago I found that I cannot export my drawing from layout to model space. Everything is exported except wipeouts.
Is it something about new Autodesk politics or what? AutoCAD 2010 still works fine with the same drawing.
Examle.dwg is attached.
I have been working on a drawing with 3 different dynamic blocks for several weeks and everything has been working perfectly. However, all of a sudden this afternoon, the text in all 3 dynamic blocks disappeared and will not display on the screen in paper or model space, and does not print.
As best I recall, I was creating a polyline viewport when this text disappeared.
I cannot turn the text on in these dynamic blocks. The text in on layer 0 which is on, and is unlocked and unfrozen. Additionally I have turned on, unlocked and unfroze all layers in the dwg and this does not work. I have also checked the text layer in the block editor and it is on layer 0.
When I click on any of the blocks, all the information appears to be correct, ie: door numbers, text style, etc. The text, however, just does not appear. Also I have never set any invisible text parameters and when I open the block editor, nothing in the invisible text area is selected or select-able.
Previous versions of this drawing, which I saved yesterday, display all block text perfectly. Perhaps there is a setting I accidentally hit which caused this problem?
I have tried repeatedly turning on all the layers, unfreezing, unlocking, changing parameters in the Style menu. I closed Autocad and turned the computer completely off and back on again.
In autocad 2011 ... I am looking for some sample code to delete all blocks with specific names in a multi layout drawing. There may be multiple blocks with the same name.
This is what I have so far ... this code collects the objects and loops through the layouts and the blocks ... if it finds the text "REVBLK" in the block name ... I want it to delete the block ... it does delete some of them but not all of the blocks ...
Dim E1 As Object
Dim ATS As Variant
Dim EA As AcadAttributeReference
Dim objLayouts As AcadLayouts
Dim LayerNextNo As Integer
Set objLayouts = ThisDrawing.Layouts
LayerNextNo = ThisDrawing.ActiveLayout.TabOrder
[code]....
I want to create some symbols which includes text. For example, I have a square with an "F" centered within the square. The problem I am having is when I insert the block into a drawing and rotate it, the "F" also rotates. Is there any way to make it so the "F" is always horizontal no matter how I rotate the block?
View 2 Replies View RelatedI am currently creating a series of dynamic blocks in order to create tabletop conveyors fro plat layout. I am using AutoCAD 2009 and am currently having issues making the turning sections. I know this is very simple using AutoCAD 2010 as there are geometric constrains available.
The curved sections must be able to have the inside thickness adaptable, the wall thickness must remain 1/2" thick, and the corner sections must have a 30, 45, 60 and 90 degree radii on them (although allowing any angle would be ideal). I was going to use visibility states to achieve the different angles as this seemed the easiest way to do this.
Attached is the basic 90 degree corner with an inside width of 4.5" with leaders labeling the areas that must be adaptive.
I'm working with InDesign CC. How do I join or link two text frames into one continuous flowing text frame?
View 3 Replies View RelatedIs it possible to treat one text object as a "master style" text object and link other text objects to its font, kerning and other qualities, so that only changing the font of one text object impacts the font choice of many objects?
Kind of like "styles", but as a "work around" for there not being text styles in After Effects.
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
the project I am working on is using a default.css and I would like to assign styles from the file to elements in edge - how can I do that?I already tried the "class" setting in the GUI next an element but the elements do not use the styles defined in the default.css.The default.css is linked in the html file properly. In the js file which edge creates I see that the value userClass: 'slideTitle' is assigned and slideTitle is defined in the default.css.
View 3 Replies View RelatedI know this is located in other locations but I can't seem to make it work with my block.
I would like the cross and the text N to rotate independantly of the arrow while the N stays with the thick line. That's the easy part. How can I make the N move along the rotation path and keep the text aligned horizontally? I read something about linked action and move, but I can't make it work.
When i add text to a layout it plots vertical not horizontal as add and shown in the layout.
View 4 Replies View RelatedI made some smart blocks with attributes but the text is not showing up when I go to layout. URL....
View 9 Replies View Related