AutoCAD Civil 3D :: Linking Blocks To Text
Mar 14, 2012
I'm currently working with AutoCAD Civil 3D Land Desktop Companion. The drawing has hundreds of callouts for different elements all over the site. The callouts are in form of a block, with a number inside. The number corresponds to a notes page which lists each detail in chronological order. (nothing new there)
Due to an expanding and shifting job site, notes have been added and deleted. The problem is now we have to go back through and update all the callout blocks. For example: We have 75 notes in our list, if note number 3 changes or is deleted, we need to go through and change all the numbers in all the blocks to reflect the change to the list.
Is there a way to link blocks to an mtext list? or possibly a spreadsheet?
View 2 Replies
ADVERTISEMENT
Jul 19, 2012
I have a little knowledge of AutoCAD and I do a lot of reports using only AutoCAD, each sheet has a border on it with the project info, no., etc. Is there a way we can link the text blocks in page 1/layout 1 to the other pages/layouts so I don't have to go to each layout and edit the text block individually? Also, i did not draw the template so as to how it was constructed i do not know.
View 1 Replies
View Related
Oct 26, 2012
Is it possible to link text to each other through visibility states without creating a block within the DB? I have 2 visibility states. Right Section, and Left Section. All notes and text stays the same, geometry is the only thing that mirrors between states.
The hope is that when I update the text on the "Right Section" state, that the same text on the "Left Section" state automatically updates with what I did on the "Right Section".
I solved this by creating multiple blocks within the DB. That works great, however there HAS to be an easier way to do this.
View 9 Replies
View Related
Jan 9, 2014
I need to know if there is a way to link an attributed F-N bubble with qty's to the BOM. This is for electrical wiring diagrams for aircraft. So I have serveral part numbers to a BOM, but no real accurate way of finding total quantities other than manually going though the drawing.
View 2 Replies
View Related
Jun 5, 2013
What I would like to do is find a way to use a dynamic block, which has already been created, and once I put in the proper length, speed, type of conveyor, etc., it will automatically update an excel spreadsheet, for example a power estimate, or cost estimate sheet. Is this possible, if so, what is the quickest, and easiest way to do this?
Also, what formula would I use in excel to link back to the DWG?
View 9 Replies
View Related
Mar 29, 2011
I work at a machine shop and have a Dynamic Block setup with quite a number of Blocks in it where I can choose whichever tooling I am working with to place into a drawing.
I am also Data-Linking parts of the drawing to Excel that has information fields to be updated in the drawing for these same toolings.
I would like to setup my drawing so that when I update the data links from the Excel spreadsheet the Dynamic Block I mentioned will also be automatically updated and display the appropriate block drawing for the tooling retrieved from Excel.
View 3 Replies
View Related
Dec 3, 2012
I have a block which is a simple rectangle with a height and width attributes that when I edit, change or update the height and width attributes I want the rectangles height and width to change as well.
I know I can go backwards using fields and the attributes would show the stretched length and width but is it possible to go the other way?
View 9 Replies
View Related
Jul 23, 2013
I can't find information for how a block's text is utilized in a style. Here are some details. I have a unitless block with a non annotative text size of 10. This block is part of a style with a size 'use drawing scale' of .12. At 40 scale, it inserts at 4.8 size. If I change the text size to 8 it inserts at 4.8. If I hcange the text size to 5, it inserts at 3.
My question is how are the annotation scale, block text size, and style insert size tied together? OR are there other variables influencing the scaling? I have attached a screen shot of some of my unofficial tests.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 3 Replies
View Related
Dec 11, 2013
When I draw new linework and text it shows up greyed out, even though it should be showing up full tone. Curiously, blocks that are inserted on the same layer as the linework and text come in full tone.
The attached image provides an example of what's happening (it's difficult to see the greyed out text reading "TEST", the leader, and a sawtooth section of polyline).
More info:
Xrefed drawings are displayed at full tone.
Linework from earlier sessions are displayed at full tone - this is only affecting new work.
This happens only in this drawing.
This happens on different sessions of C3D (i.e. different computers).
This happens on when drawing on any layer.
The layers are unlocked.
This occurs in both model and paperspace. The drawing has been audited (no errors were found). Everything prints out properly.
I suspect there's a variable that deals with visibility has been inadverdantly changed in this particular drawing.
C3D 2013
View 9 Replies
View Related
Apr 26, 2012
how to make make block attributes text visible next to my blocks?
View 4 Replies
View Related
May 21, 2013
I have created d/blocks for my different pipe sizes i.e one block with a dropdown to select the different sizes and have done the same for my flanges. now how do I link / insert the flange d/block to the piping block so that I can export the information into a material list later on.
View 1 Replies
View Related
Jan 30, 2009
I have a user that wants to be able to either link dimensions to other dimensions, such as a ref dim to a live dimension or while inserting text in a note on the drawing to be able to list a dimension within that text string to a dimension of the part so as the part updates, the dimension in the text sting updates.
View 9 Replies
View Related
Nov 26, 2013
I basically have a block with two text attributes which they are the same but in different positions.
When you double click on the block I don't want to enter "A" as the attribute value twice. I just want to type "A" one time and automatically receive it on the other position as "A" too.
Basically it is Detail(A-A) as in the following block.
A-------------A
View 5 Replies
View Related
Apr 4, 2012
Create a large number of polygons (plines, parcels, whatever) that represent spaces on a building plan
Assign a space number to the polygon
Link the space number to an Excel spreadsheet (or Access DB) so that the characteristics of the polygon (line and fill color, for example) are chosen based on the "owner" of the space (e.g.; Engineering, Common Areas, etc.).
Display a label stating the space number and the space name. Is this best done with "Parcels" in Civ3D, or with "Polygons" in Map, or some other way.
View 3 Replies
View Related
Apr 16, 2012
Is there a way to link feature lines to points? If I have a series of points and I've joined them with a feature line; I want the feature line to update automatically if I adjust a point elevation.
View 4 Replies
View Related
Jul 24, 2013
See how linking is happening between points along the same survey line? How to prevent this?
View 4 Replies
View Related
Feb 12, 2013
I am using Civil3D 2013. I was wondering if there was a way to link your dwg to a master dwg file? For example, if i were to copy the dwg into folder A and copy a dwg into folder B. I would then update the master dwg with either a layer color change or linetype or add a layer / label etc, could those changes from the master be (linked) or a child or the parent master dwg? Or does this work with dwts?
View 8 Replies
View Related
May 1, 2012
I am creating a border and making it attributed. I have the drawing number showing up in the title block and in the opposite corner of the page. I want to link the two somehow so that when one is edited the other automatically changes to match. Is this possible to do?
View 6 Replies
View Related
Oct 1, 2011
I have been working on a drawing with 3 different dynamic blocks for several weeks and everything has been working perfectly. However, all of a sudden this afternoon, the text in all 3 dynamic blocks disappeared and will not display on the screen in paper or model space, and does not print.
As best I recall, I was creating a polyline viewport when this text disappeared.
I cannot turn the text on in these dynamic blocks. The text in on layer 0 which is on, and is unlocked and unfrozen. Additionally I have turned on, unlocked and unfroze all layers in the dwg and this does not work. I have also checked the text layer in the block editor and it is on layer 0.
When I click on any of the blocks, all the information appears to be correct, ie: door numbers, text style, etc. The text, however, just does not appear. Also I have never set any invisible text parameters and when I open the block editor, nothing in the invisible text area is selected or select-able.
Previous versions of this drawing, which I saved yesterday, display all block text perfectly. Perhaps there is a setting I accidentally hit which caused this problem?
I have tried repeatedly turning on all the layers, unfreezing, unlocking, changing parameters in the Style menu. I closed Autocad and turned the computer completely off and back on again.
View 1 Replies
View Related
Oct 12, 2011
I have been creating grading objects from my curb lines, assigning grades using the editor, then offsetting that line for the BACK of curb, and using the raise-lower command to raise the curb line height. If I edit the original face of curb line (gutter grade) then I go back and redo the process. Is there any way to intelligently link these two lines so that if one gets edited C3D knows the other is 0.5 feet higher (or lower) than its neighbor?
View 9 Replies
View Related
Oct 4, 2012
I want to create some symbols which includes text. For example, I have a square with an "F" centered within the square. The problem I am having is when I insert the block into a drawing and rotate it, the "F" also rotates. Is there any way to make it so the "F" is always horizontal no matter how I rotate the block?
View 2 Replies
View Related
Nov 20, 2013
When I paste the proposed surface with the corriodor surface and I check the profile the proposed surface ties to the bottom of the kerb ignoring the footpath.Also in the same drawing file I can't seem to export it to ACAD.
View 1 Replies
View Related
Sep 4, 2013
Is there away to link a i.e. (a stoop to a finish flood elev)? So that, if I were to raise the finish floor, the stoop would move also. I understand I could possible to a create grading feature line for a stoop, but what happens if the stoop would be irregular shapped and not a rectangle?
View 5 Replies
View Related
Mar 15, 2014
I'm working with InDesign CC. How do I join or link two text frames into one continuous flowing text frame?
View 3 Replies
View Related
Aug 11, 2013
Is it possible to treat one text object as a "master style" text object and link other text objects to its font, kerning and other qualities, so that only changing the font of one text object impacts the font choice of many objects?
Kind of like "styles", but as a "work around" for there not being text styles in After Effects.
View 8 Replies
View Related
Jun 4, 2013
the project I am working on is using a default.css and I would like to assign styles from the file to elements in edge - how can I do that?I already tried the "class" setting in the GUI next an element but the elements do not use the styles defined in the default.css.The default.css is linked in the html file properly. In the js file which edge creates I see that the value userClass: 'slideTitle' is assigned and slideTitle is defined in the default.css.
View 3 Replies
View Related
Aug 29, 2011
I know this is located in other locations but I can't seem to make it work with my block.
I would like the cross and the text N to rotate independantly of the arrow while the N stays with the thick line. That's the easy part. How can I make the N move along the rotation path and keep the text aligned horizontally? I read something about linked action and move, but I can't make it work.
View 9 Replies
View Related
Nov 16, 2012
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
View 4 Replies
View Related
Nov 16, 2012
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
View 4 Replies
View Related
May 24, 2011
We are running autocad mep 2010. I will occasionally open drawings and find that all the text has changed. It seems that when my co workers insert certain blocks, that somehow it will cause this to happen.
View 3 Replies
View Related
Mar 28, 2013
I would like to create a block that has an attribute that will always read left to right no matter which method used to rotate the block itself. I know this can be done attaching a rotate parameter to the block and not the attribute, but i want it to also work when using the rotate command.
View 3 Replies
View Related
