CorelDRAW Graphics Suite X5 :: Text Frame When Pasting In Blocks Of Text?
Nov 16, 2012
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
View 4 Replies
ADVERTISEMENT
Nov 16, 2012
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
View 4 Replies
View Related
Mar 30, 2011
I am doing a menu for a client and it seems that every time I put a specific font size such as 10pt. in a text frame..it changes to a size 11.3245pt. every time I open the file back up to work on it again.
How do I prevent this? Or is there something I am doing wrong in the text frame?
View 14 Replies
View Related
Jan 2, 2013
02012013010.jpg
Blank Blocks behind text and graphics
View 4 Replies
View Related
Mar 23, 2012
the thing is that on my previous version of Corel Draw (9? 10? whatever...) I could take a text frame with tabs lined up, copy it, paste it into a new document and all the tabs would be carried over from the original.
but when I try to do that in X3, it just copies across as plain text, meaning that I would have to do all the tabbing again.
When I say the tabs were set up, it's a list that looks like this:
Bill.................32..................Harvard
John..............27..................Oxford
where the .............. is made just by tabbing across.
View 4 Replies
View Related
Apr 10, 2013
it happened suddenly. if i zoom right in and go into wireframe...it shows the text . it's able to be read when i convert to curves, but then i cant edit it.
the words are just long black rectangles.
View 2 Replies
View Related
Jul 14, 2013
I had several CorelDraw documents that crashes on me, and the auto-backup did not work.
In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.
I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.
Strange the auto-backup directory/folder always do not have my backup files too.
View 6 Replies
View Related
Nov 20, 2013
A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
View 6 Replies
View Related
Jul 29, 2011
I removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 4 Replies
View Related
Apr 5, 2011
Is there a way of unlinking the text frames so that you can move the text independently from the others?
View 5 Replies
View Related
Dec 3, 2013
Is it possible to lock a text box to prevent it from moving but still be able to input & edit text?I want to make a drawing template in CorelDraw x6 using text boxes for "non Corel friendly" people to use but need the actual text boxes to stay in the same place all the time!?
View 3 Replies
View Related
Apr 28, 2011
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
View 14 Replies
View Related
Mar 15, 2012
I am using Corel for driving a fiber laser through a dedicated Net connection not available to the rest of the network and it and my computer are right next to the switch.
My problem is that when I send a job from the PC to the laser it works fine. If I make a small change on the graphics, I save it and send a new job to the laser. Quite often, some part of my grapics is left off the plot even though I didn't touch that graphic or mod it. So I send the job over again and now somewhere else is missing some of the graphic word...usually a word or a letter or number. I usually turn off the computer or get out of Corel and come back in and it is fixed. That doesn't sound like a network dropped or corrupted graphic. I have tried turning off the laser with Corel still up and it doesn't fix the problem when I bring the laser on line again.
View 1 Replies
View Related
Jun 4, 2012
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
View 4 Replies
View Related
Sep 9, 2011
I'm making tickets and i need to add tickets numbers, from 1 to 1000. Print & Merge doesn't fit for me.So I want to change text tag for example: "<text>" to text which will be different (1, 2 ,3 ,4 ,5 ,6 ,7 ...) Wagenaar where the code finds word "Andorra" and change it to "Andorre".
Public Function FindReplace(ByVal str As String, ByVal toFind As String, ByVal toReplace As String) As String Dim i As Integer For i = 1 To Len(str) If Mid(str, i, Len(toFind)) = toFind Then ' does the string match? FindReplace = FindReplace & toReplace ' add the new replacement to the final result i = i + (Len(toFind) - 1) ' move to the character after the toFind Else FindReplace = FindReplace & Mid(str, i, 1) ' add a character End If Next iEnd Function.
[code]...
View 2 Replies
View Related
Feb 20, 2013
I am having trouble resizing text boxes with text in them, so that the text scales with the box.If I convert the text box the curves, it messes up the formatting when I add an outline to the curve because the text box itself is given a outline.
View 4 Replies
View Related
Jul 3, 2013
Is there a way to automatically condense text in a one line text box, I have linked text boxes vertically and want to paste a list of names into them, and if a name is too long I want it to condense to the text box.
I know how to do this in print merge with the envelope tool but not in a text box.
View 5 Replies
View Related
Oct 20, 2011
I'm creating a calendar page - each day is a box. I need the text I put in to be written at the bottom of the box.
View 4 Replies
View Related
Feb 4, 2010
how to Full justify text within a text block so that the shorter sentences (ie the last line of a paragraph) don't Force Justify?
I'm using the correct justify (full), but it is stretching out the last line as if it's a force justify.
View 9 Replies
View Related
Aug 12, 2011
I work for a translation company and I've installed a Trial Copy of Corel Draw X5.
I have a 6-page document with several text areas (the Obect Manager sees them as Artistic Areas [I think]).
I'm trying to extract all the text into a text (prefferably an XML), file translate the text using Trados, then import the translated text file back into the Corel Draw Document, with the appropriate text in place of the original text.
I've tried using Extract / Merge text, but this doesn't seem to work.
View 1 Replies
View Related
Sep 25, 2013
The problem just came today while i tried to copy/paste text from Ms Word. As I usually do it asks me about formatting options before pasting text but today its not working the way it should. It simply pastes plain text without all formatting I did to my document in Ms Word. I even tried to repair my software but nothing worked.
View 1 Replies
View Related
Mar 28, 2012
I've been using CorelDraw X3 for a while now and whenever I have copied and pasted artistic text is has simply pasted over itself in the same place for me to move wherever I want to.
Yesterday I copied some artistic text and when I hit paste it pasted as paragraph text, in a different size and font and in the center of the page. Have I accidentally and unawares changed a setting?I know I can get around this by duplicating instead of pasting but it is frustrating as it is a feature I use constantly.
View 4 Replies
View Related
Sep 4, 2013
I converted a DXF file to a Corel Designer file. This DXF file also has some dimensions which turned into paragraph text. This paragraph text is turned by 90 degrees. The font size is rather small, so I increased it by some points. As the paragraph text frames were now too small, I tried to increase their size. However, the text frames always jump back to their original size.
I experimented a little bit and noticed that this is only, if the text is turned by 90 or 270 degrees. If the text frame is not turned or turned by 180 degrees, you can change the size of the text frame. Additionally this problem arises only, if the option "Expand and shrink paragraph text frames to fit text" is activated (in Tools | Options | Workspace | Text). Sometimes some text frames were adapted automatically, when I changed this option. However, I do not know when which text frame was changed.
Corel Designer X6, service pack 1
View 2 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
Sep 5, 2009
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies
View Related
May 9, 2011
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
View 14 Replies
View Related
Nov 19, 2011
I have made an object using the artistic media tool and I would like to copy and paste it, however when I try and paste it into my page there is nothing there but the bounding box. How do I copy and paste this object so it can be seen?
View 8 Replies
View Related
Jan 31, 2013
When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
Version 16.2.0.998 on 64bit, Win 7.
View 3 Replies
View Related
Feb 25, 2013
I really don't know the best way to do this or maybe there is a standard, but here is what I am wanting.
When you put text over a simple vector graphic, the graphics makes it hard to read the Text.
I normally delete the graphic lines touching the text and this works but was wondering if there was another way.
Example: if this is a one color design "White" and it is just an outline of lets say a human, and I want to display text which is "White" also across the human image sometimes the image will interfere with being able to read the text clearly.
View 12 Replies
View Related
Feb 28, 2013
Recently when completing a project, instead of being able to just click and write text or click on and edit existing text, a 'edit text' pop up box appears. i have looked at the setting and i cant seem to work out what i have done and how to correct this?
View 3 Replies
View Related
