When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
Version 16.2.0.998 on 64bit, Win 7.
When trying to open a coreldraw document sent to me containing fonts that I do not have, I cannot seem to open only as curves and it always wants to replace missing fonts. I am sure I could do this with X3, but not X5.
I just want to import as curves and not substitute fonts.
I use CorelDRAW X4 exclusively (90%) for Laser work. I have a Page saved as Laser Page. It use to open with a 24 x 12 page area and Horizontal and vertical guidelines in place. It is set to "show guidelines."
However, every time I open a new document, the page layout and guidelines are not there. I always have to rebuild the page and add the guidelines. What has changed so that all I get is a blank page anymore? Or how to reestablish my defaults? I have re-saved it as my new default countless times but nothing sticks. It's a pain to have to always reestablish the layout I want to work with..
I have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Printing with: HP inkjet 110 A0Riso RZ370, RZ590 A3Epson inkjet 1400 A3Canon laser LBP5200 A4HP laser 1010 A4
We have an issue happening on many of the documents that we have that include a transparency or gradient. We did not have these issues in Draw12. (but did have printing issues)
1st issue: Opening these gradients will randomly flip them. Like so:
The bottom image is correct. Now when we print them from Corel Draw X5 to either of our printers (Bizhub C250, or Biizhub C360ps) we get the following (this is created from the same master file, same settings):
Notice the lens effect color replacement is gone, and the bottom gradient is barely visible, the top one not working at all.
Same document, saved to 12 and printed the same way:
Both sent with identical printers settings, same print driver, and as close as possible settings in the X5 and Draw 12 dialog print boxes.
I noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I have made an object using the artistic media tool and I would like to copy and paste it, however when I try and paste it into my page there is nothing there but the bounding box. How do I copy and paste this object so it can be seen?
View 8 Replies View RelatedHow to add my all regular usage documents as a templates. I tried in different ways to display my files in preview dialog box, but no use, only one file is appeared always that is only when the file exist in the desktop. How to display all of my fav. documents in the template preview when new from template command is used .
View 9 Replies View RelatedI"ve just recently upgraded to CDGraphics Suite X5 (from 12), along with Windows 7 and M.Office 2010. When trying to export jpg's I've got 2 problems:
a) Jpg files that I"m now exporting seem to have so many more "options" for exporting and are automatically exporting colours as CMYK. Some of the software programs that I use (for programming digital signage) require jpg files in RGB. Is there a way to set this as a default instead of having to change this everytime I export? (note that I have "checked" the embed colour profile option for my US Web Coated Pantones).
b) The default for exporting is also set at "custom" - should I always be changing this to either medium or large, or can I just leave it at custom. Often I am just emailing jpg's for approval purposes, so I don't always need large file sizes. Does custom set it to the largest possible file size?
I found a tab at the top of the export window that says "Load Presets" and lists for example "low quality jpg.xml" what is this for?
c) when I look at my jpg files in my documents folders they appear "locked" with a little lock on them. Old jpg files created in CD12 don't have this little "lock" icon on them. I have checked the properties and see that these files give full access for modification etc, so I can't figure out why they may be locked.
when i click the fonts list documents fonts not showing in corel 12
View 8 Replies View RelatedWhen i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
We have X5 installed on four computers at work and on two of the machines (including mine) X5 will crash everytime (100%) when trying to export to jpg. It does not even get as far as a dialog box its just crashes straight away. I it does this everytime on two comuters without fail.
Is there a way of viewing an error report? Or what would I have to do to file one?
I can export to other formats just fine, it only seems to be JPG....
I am running windows 7 and X5 SP2
I upgraded to x5 from corel 11 last year. Crashes frequently and corrupts file. I have to make copy after copy to keep from loosing all of my work. I am at the point I can not do my work. Sometimes files just become so slow and then just crash. I can take the same file that is slow, save as ver 11 and open in corel draw 11 and works great. I have never had so many problems with a program in my life. I am now downloading hotfix 4 and service pack 3 and will install, but I am not very optimistic.
There is not particular situation that the files cause the program to crash. It is nothing that complex. Seems to be often when I try to save or when I have multi pages.
Here is my system info.
Operating System MS Windows 7 64-bit SP1CPU Intel Core i3/i5/i7 @ 2.10GHz 52 °C Sandy Bridge 32nm TechnologyRAM 3.93 GB Single-Channel DDR3 @ 665MHz (9-9-9-24)Motherboard Hewlett-Packard 167C (CPU 1) 51 °CGraphics Generic PnP Monitor (1366x768@60Hz) Intel(R) HD Graphics FamilyHard Drives 313GB TOSHIBA TOSHIBA MK3261GSYN (SATA)
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
Photo-Paint crashes when saving twice out of three times...
When I edit a bitmap object from Draw, I always have to start my editing over and over.I lose my object. So...I do a workaround...I export the selected object, open it in Photo-Paint to edit it.
When saving...same thing. Except, the file saves properly. It's just that Photo-Paint crashes.
It used to do that with my older X4 version as well...I skipped the X5 and when on to the X6.
It still crashes, but even more...thing is...Both programs were installed on two different computers.
I'm running Coreldra X4 on a windows vista machine. Lately I started having a courious problem with Coreldraw x4. When a try to open a cdr file before opening CDX4 i get an error message saying that the file dos not exist. after this CDX4 crashes.
On the other side if I open CDX4 and then try to open the very same cdr file everything is ok.
I successfully installed CorelDraw X6 but I am unable to open it. It starts to load and then it crashes. At first I thought it was a bad install, so I uninstalled and reinstalled and it still won't open. Norton AV was turned off during both installs. I have searched and see that quite a few users have the same problem but I haven't found a cause or solution. I'm using Windows 7 64 bit, Intel i7, 16 GB ram.
View 13 Replies View RelatedI have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies View RelatedCORELDRAW 12 crashes on opening files.. I get the crash wisdard saying it is unstable..
it worked a few hours ago... this is my work computer. i use program to make silk screens
I am running windows 7
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDRW.exe Application Version: 12.0.0.458 Application Timestamp: 3fced9b6 Fault Module Name: CdrSty.dll Fault Module Version: 1.0.0.458 Fault Module Timestamp: 3fceecf3 Exception c0000005 Exception Offset: 000091c1 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 9779 Additional Information 2: 9779cefde9fcb36e63d4c28219879671 Additional Information 3: 537f Additional Information 4: 537f578d5c430251a71245316ee5988f
is it the CdrSty.dll file i need to reinstall. where to find and how to install
i did find a ziped copy of CdrSty.dll but do not know where to place it..
yes i put in the orignial disk and try to repair it severial times..( said it installed all i needed)
unistalled the program and reinstalled it vie: the original disk several times and still no go.
We have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
I have the entire subscription of 'Corel 6X'. I have been using it for a few months with no problems, even after I did the 8.1 update. Now all programs will load and run except for 'Draw 6X', it starts to load and then it will start to 'load environment' and then crash. As I said above, every other part of the suite open and run fine.
I can give you no information about updates or version as it won't load so I could check for updates. I searched for other post, and it returned no other similar problems listed for 'Draw 6X'. If I get no answers I'll just un/re install that program itself and see if that fixes things.
I am on a Dell PC with plenty of everything running Win 8.1 64 bit and running the online yearly subscription of 'CorelDraw 6X' 64 bit version that was up to date and working fine on 8.1 fine for more than a month. Now the 'splash' screen shows and gets to 'loading environment' and then the quaint Win window comes out 'There is a problem and windows has to close this program'.
"The only way is through!"cb'99'
Corel Crashes after I applied the updates 1-3 & 4 in CorelDRAW X5.
Every time I go to combine a powerclip (basically recombine a previously broken apart powerclip) Corel Crashes. Again, there were no issues until I installed the hot fix (SP 3 & 4)Operating System: Windows 7 Ultimate 64bit, 16gb Ram, 280gb solid state drive..net Framework is all up to date.I sit here all day designing websites.
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
my corel crashing every time I try to select the color palette menu in the window dropdown, try to change the palette in the solid fill color window, and also in the outline color window. I have tried changing the color preset, reinstalling, resetting to defaults, am updated to the newest version (15.2.0.686), installing the hot fixes, blah, blah blah....... everything.
Win7 sp1, 12 gigs ram, i5 64 bit.
I have been working in this file for weeks, but now I did the sp2 update and when I try to open the file, the font substitution dialogue box opens. No matter which option I select, it causes the program to crash and close.
View 1 Replies View RelatedX6 becomes very unstable when using fills with vector patterns. There is, for whatever reason, a lower limit for the size of the pattern (1 inch) that is way to high for most textures, so the only way to work around is to calculate the wanted size of the pattern tiles, enlarge the object accordingly, fill it, assign the size with object attribute and renormalize the size of the object. This used to work fine in prior versions, but X6.3 already crashed several times instantly or soon after the procedure at my site. This is not amusing.
Is there maybe another way to get past the silly one inch pattern size limit?
used hardware: Dell Precision T-7500 workstation / Xeon 5680 6core @ 3.3Ghz / AMD Firepro 8800 / 16 GB RAM / Win7x64
I cleared the temp/cache on my Windows 7 64 bit that has been running CorelDraw Suite 6 since its release. Never an issue. Now, after installing the latest upgrade the program Coreldraw loads just fine and it opened my most current file. After changing a letter in the text box the program crashes. You get a popup window that Coreldraw has closed. I rebooted my machine and it does this each time the program is reloaded.
I went through the common causes of Coreldraw issues and nothing is left to remove or change. Clearly the latest upgrade is flawed and instead of fixing performance issues it has created one that stops the program from working.
I upgraded another computer and the same issue appears after the upgrade. I did a system recovery and now Coreldraw will not open .cdr files into Coreldraw. It now shows a filter error and no file will open.
When I go to open the displace filter it just crashes .
View 2 Replies View RelatedI recently bought a new laptop with Windows 7 64 bit OS, and installed the CorelDraw X5(worked fine on an older XP machine) on it, the application crashes every time when the progress showing "Creating Application Environment". I tried to run it under XP compatible mode, tthe only difference is now the Regstration works, but the app still crashes every time.
View 1 Replies View Related