CorelDRAW Graphics Suite X6 :: Crashes When Saving Twice Out Of Three Times?
Oct 1, 2013
Photo-Paint crashes when saving twice out of three times...
When I edit a bitmap object from Draw, I always have to start my editing over and over.I lose my object. So...I do a workaround...I export the selected object, open it in Photo-Paint to edit it.
When saving...same thing. Except, the file saves properly. It's just that Photo-Paint crashes.
It used to do that with my older X4 version as well...I skipped the X5 and when on to the X6.
It still crashes, but even more...thing is...Both programs were installed on two different computers.
View 4 Replies
ADVERTISEMENT
Sep 20, 2012
problem with (times roman open font) in x5 CDR, not working,
View 1 Replies
View Related
Sep 1, 2011
I have this script that basically makes a shape expand by adding an outline, conveting the outline to an object, and then welding the whole thing together.
I have the script set to execute with hotkey ctrl+numpad+
The odd thing is, when I run it once, it seems to work fine and only one object is left, but when I hold down ctrl and press numoad+ over and over again, it seems to produce a new copy of the object everytime.
I'm not sure why this is happening, but I need to get it to stop.
Sub Expand() EventsEnabled = False 'Dim vars Dim c1 As New Color Dim OrigSelection As ShapeRange Dim OrigColor As Shape Dim width1 As Double Dim height1 As Double Dim minSize As Double Dim Thickness As Double 'copy color of current selection Set OrigColor = ActiveShape If OrigColor Is Nothing Then Exit Sub If OrigColor.Fill.Type <> cdrUniformFill Then Exit Sub c1.CopyAssign OrigColor.Fill.UniformColor 'get thickness to increase by Set OrigSelection = ActiveSelectionRange OrigSelection.GetSize width1, height1 If width1 <= height1 Then minSize = width1 If width1 > height1 Then minSize = height1 Thickness = minSize * 0.035 OrigSelection.SetOutlineProperties Color:=CreateRGBColor(0, 0, 0) OrigSelection.SetOutlineProperties Thickness, ScaleWithShape:=True 'weld Dim s1 As Shape Set s1 = OrigSelection(1).Outline.ConvertToObject Dim s2 As Shape Set s2 = s1.Weld(OrigSelection(1), True, True) 'auto reduce 's2.Curve.Nodes.All.AutoReduce 0.001 's2.Fill.ApplyUniformFill c1 'delete remnants OrigSelection.Delete s1.Delete 'OrigColor.Delete EventsEnabled = TrueEnd Sub
View 5 Replies
View Related
Jun 6, 2013
When i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
View 3 Replies
View Related
Mar 17, 2011
We have X5 installed on four computers at work and on two of the machines (including mine) X5 will crash everytime (100%) when trying to export to jpg. It does not even get as far as a dialog box its just crashes straight away. I it does this everytime on two comuters without fail.
Is there a way of viewing an error report? Or what would I have to do to file one?
I can export to other formats just fine, it only seems to be JPG....
I am running windows 7 and X5 SP2
View 2 Replies
View Related
May 15, 2012
I upgraded to x5 from corel 11 last year. Crashes frequently and corrupts file. I have to make copy after copy to keep from loosing all of my work. I am at the point I can not do my work. Sometimes files just become so slow and then just crash. I can take the same file that is slow, save as ver 11 and open in corel draw 11 and works great. I have never had so many problems with a program in my life. I am now downloading hotfix 4 and service pack 3 and will install, but I am not very optimistic.
There is not particular situation that the files cause the program to crash. It is nothing that complex. Seems to be often when I try to save or when I have multi pages.
Here is my system info.
Operating System MS Windows 7 64-bit SP1CPU Intel Core i3/i5/i7 @ 2.10GHz 52 °C Sandy Bridge 32nm TechnologyRAM 3.93 GB Single-Channel DDR3 @ 665MHz (9-9-9-24)Motherboard Hewlett-Packard 167C (CPU 1) 51 °CGraphics Generic PnP Monitor (1366x768@60Hz) Intel(R) HD Graphics FamilyHard Drives 313GB TOSHIBA TOSHIBA MK3261GSYN (SATA)
View 14 Replies
View Related
Jul 27, 2011
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
View 4 Replies
View Related
Jan 31, 2013
When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
Version 16.2.0.998 on 64bit, Win 7.
View 3 Replies
View Related
Jun 17, 2009
I'm running Coreldra X4 on a windows vista machine. Lately I started having a courious problem with Coreldraw x4. When a try to open a cdr file before opening CDX4 i get an error message saying that the file dos not exist. after this CDX4 crashes.
On the other side if I open CDX4 and then try to open the very same cdr file everything is ok.
View 5 Replies
View Related
Jun 30, 2012
I successfully installed CorelDraw X6 but I am unable to open it. It starts to load and then it crashes. At first I thought it was a bad install, so I uninstalled and reinstalled and it still won't open. Norton AV was turned off during both installs. I have searched and see that quite a few users have the same problem but I haven't found a cause or solution. I'm using Windows 7 64 bit, Intel i7, 16 GB ram.
View 13 Replies
View Related
Apr 7, 2011
I have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies
View Related
Jul 16, 2013
CORELDRAW 12 crashes on opening files.. I get the crash wisdard saying it is unstable..
it worked a few hours ago... this is my work computer. i use program to make silk screens
I am running windows 7
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDRW.exe Application Version: 12.0.0.458 Application Timestamp: 3fced9b6 Fault Module Name: CdrSty.dll Fault Module Version: 1.0.0.458 Fault Module Timestamp: 3fceecf3 Exception c0000005 Exception Offset: 000091c1 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 9779 Additional Information 2: 9779cefde9fcb36e63d4c28219879671 Additional Information 3: 537f Additional Information 4: 537f578d5c430251a71245316ee5988f
is it the CdrSty.dll file i need to reinstall. where to find and how to install
i did find a ziped copy of CdrSty.dll but do not know where to place it..
yes i put in the orignial disk and try to repair it severial times..( said it installed all i needed)
unistalled the program and reinstalled it vie: the original disk several times and still no go.
View 14 Replies
View Related
Apr 14, 2010
We have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
View 11 Replies
View Related
Dec 27, 2013
I have the entire subscription of 'Corel 6X'. I have been using it for a few months with no problems, even after I did the 8.1 update. Now all programs will load and run except for 'Draw 6X', it starts to load and then it will start to 'load environment' and then crash. As I said above, every other part of the suite open and run fine.
I can give you no information about updates or version as it won't load so I could check for updates. I searched for other post, and it returned no other similar problems listed for 'Draw 6X'. If I get no answers I'll just un/re install that program itself and see if that fixes things.
I am on a Dell PC with plenty of everything running Win 8.1 64 bit and running the online yearly subscription of 'CorelDraw 6X' 64 bit version that was up to date and working fine on 8.1 fine for more than a month. Now the 'splash' screen shows and gets to 'loading environment' and then the quaint Win window comes out 'There is a problem and windows has to close this program'.
"The only way is through!"cb'99'
View 3 Replies
View Related
Mar 13, 2012
Corel Crashes after I applied the updates 1-3 & 4 in CorelDRAW X5.
Every time I go to combine a powerclip (basically recombine a previously broken apart powerclip) Corel Crashes. Again, there were no issues until I installed the hot fix (SP 3 & 4)Operating System: Windows 7 Ultimate 64bit, 16gb Ram, 280gb solid state drive..net Framework is all up to date.I sit here all day designing websites.
View 15 Replies
View Related
Jul 25, 2007
how to covert a PDF file to CorelDraw? I have tried saving the PDF as an EPS and then opening it in CorelDraw, but it only displays a grey box which states "Illustrator 7.eps".
View 14 Replies
View Related
Oct 5, 2011
A fix has been released for saving to JPG and PNG after installing SP3. [URL]........
View 2 Replies
View Related
Nov 26, 2013
I have several cards that i have designed in CorelDraw x6 (64 bit)
Each CorelDraw card file varies in size from between 5 & 15mb each ...i have exported each as jpegs & they look great onscreen!
i need to get the cards printed now & the printer asked for a pdf file with the cards files in
I have hardly ever used pdf's at all so know very little
Using the Corel preset "Export to pdf" option in CorelDraw the pdf file size comes out at 12mb for EACH INDIVIDUAL card ....is there anyway to get the pdf at the same quality & size as my jpegs??
View 8 Replies
View Related
Jan 17, 2013
my corel crashing every time I try to select the color palette menu in the window dropdown, try to change the palette in the solid fill color window, and also in the outline color window. I have tried changing the color preset, reinstalling, resetting to defaults, am updated to the newest version (15.2.0.686), installing the hot fixes, blah, blah blah....... everything.
Win7 sp1, 12 gigs ram, i5 64 bit.
View 6 Replies
View Related
Jan 5, 2013
I have been working in this file for weeks, but now I did the sp2 update and when I try to open the file, the font substitution dialogue box opens. No matter which option I select, it causes the program to crash and close.
View 1 Replies
View Related
May 12, 2013
X6 becomes very unstable when using fills with vector patterns. There is, for whatever reason, a lower limit for the size of the pattern (1 inch) that is way to high for most textures, so the only way to work around is to calculate the wanted size of the pattern tiles, enlarge the object accordingly, fill it, assign the size with object attribute and renormalize the size of the object. This used to work fine in prior versions, but X6.3 already crashed several times instantly or soon after the procedure at my site. This is not amusing.
Is there maybe another way to get past the silly one inch pattern size limit?
used hardware: Dell Precision T-7500 workstation / Xeon 5680 6core @ 3.3Ghz / AMD Firepro 8800 / 16 GB RAM / Win7x64
View 9 Replies
View Related
Mar 28, 2013
I cleared the temp/cache on my Windows 7 64 bit that has been running CorelDraw Suite 6 since its release. Never an issue. Now, after installing the latest upgrade the program Coreldraw loads just fine and it opened my most current file. After changing a letter in the text box the program crashes. You get a popup window that Coreldraw has closed. I rebooted my machine and it does this each time the program is reloaded.
I went through the common causes of Coreldraw issues and nothing is left to remove or change. Clearly the latest upgrade is flawed and instead of fixing performance issues it has created one that stops the program from working.
I upgraded another computer and the same issue appears after the upgrade. I did a system recovery and now Coreldraw will not open .cdr files into Coreldraw. It now shows a filter error and no file will open.
View 9 Replies
View Related
Nov 30, 2012
When I go to open the displace filter it just crashes .
View 2 Replies
View Related
Aug 19, 2011
I recently bought a new laptop with Windows 7 64 bit OS, and installed the CorelDraw X5(worked fine on an older XP machine) on it, the application crashes every time when the progress showing "Creating Application Environment". I tried to run it under XP compatible mode, tthe only difference is now the Regstration works, but the app still crashes every time.
View 1 Replies
View Related
Jun 24, 2011
I have a new Corel product...Graphics Suite X4 Home version operating on Windows 7. I have designed several flyers and attempted to save as a PDF file to send to an associate. However the PDF option is not available in the selection box.
So I attempted to download Service Pack 2 for Suite X4 but the installation fails on three attempts.
View 4 Replies
View Related
Feb 4, 2008
Is there any other way to save X4 files to X3 without going into the save dialog and changing the version you want it to be saved in? Also Is there any other way for me to convert all rgb in a document to cmyk without selecting the objects or using the object manager?
View 5 Replies
View Related
Jun 17, 2011
I am having an issue saving file changes. I can create a file and save it, but if I make a change and try to save it again I get an error that says that the file is open elsewhere.
View 3 Replies
View Related
Nov 10, 2011
I have a CDR file and I tried to export it as an SVG. It's supposed to look like this:
PNG:
[URL]
But CorelDraw X4 saves it like this:
SVG:
[URL]
The main problem is that the gradient isn't centered. I'm not an SVG expert, but I played around with the XML and I couldn't get the gradient to center. Are there any settings in CDRX4 I can change, or is it possible to edit the XML to make it centered?
View 8 Replies
View Related
Oct 8, 2012
I'd never had problems with previous versions of corel draw with this. I make a drawing in rgb colours and save it as svgz. Even with a simple picture like a few squares. In x6 I get the mention "unvalid id's found".
I can't figure out what I have to do to prefend that mention.
View 5 Replies
View Related
Nov 13, 2011
when you export any size graphic as a jpg (selected only or not) the dialogue box comes up empty, completely! when i go to close it, it crashes corel. If I tick the donot show filter dialogue box It makes a jpg image but i have no control over the settings. It works when I export to bmp! this is getting frustrating as I often have to jpeg some graphics for customers.
View 11 Replies
View Related
Mar 24, 2012
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
View 1 Replies
View Related
