CorelDRAW Graphics Suite X6 :: Upgrade Crashes After Making Input
Mar 28, 2013
I cleared the temp/cache on my Windows 7 64 bit that has been running CorelDraw Suite 6 since its release. Never an issue. Now, after installing the latest upgrade the program Coreldraw loads just fine and it opened my most current file. After changing a letter in the text box the program crashes. You get a popup window that Coreldraw has closed. I rebooted my machine and it does this each time the program is reloaded.
I went through the common causes of Coreldraw issues and nothing is left to remove or change. Clearly the latest upgrade is flawed and instead of fixing performance issues it has created one that stops the program from working.
I upgraded another computer and the same issue appears after the upgrade. I did a system recovery and now Coreldraw will not open .cdr files into Coreldraw. It now shows a filter error and no file will open.
View 9 Replies
ADVERTISEMENT
Mar 15, 2011
Can you get the clipart with an upgrade in X4 in X5.
View 2 Replies
View Related
Apr 26, 2011
I just upgraded to X5 (from X3). Many of the fonts that I have in my used are missing. I went through the Bit Stream Font Navigator and cannot located them there either. Many of my existing customer files require those fonts for use in their logos...etc. I also went to myfonts as indicated and did not see them there.
View 2 Replies
View Related
Aug 21, 2013
I'm having problems updating.I downloaded the update, but when going to install, is still on the screen and the update does not continue the upgrade process.
View 3 Replies
View Related
Jun 6, 2013
When i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
View 3 Replies
View Related
Mar 17, 2011
We have X5 installed on four computers at work and on two of the machines (including mine) X5 will crash everytime (100%) when trying to export to jpg. It does not even get as far as a dialog box its just crashes straight away. I it does this everytime on two comuters without fail.
Is there a way of viewing an error report? Or what would I have to do to file one?
I can export to other formats just fine, it only seems to be JPG....
I am running windows 7 and X5 SP2
View 2 Replies
View Related
May 6, 2011
I bought Corel X5 to design some 2D templates to cut wood in creating cabinets for a Volkswagon Bus Camper. An old VW Bus doesn't have a straight surface in it.
My objective is to take measurements inside the bus for each piece of the cabinet. Think of the inside roof for example... the mission is to create the front of a cabinet that goes from one side of the bus to the other. Thus, a straight line on the bottom and then an arc for the top of cabinet so that it will meet perfectly with the inside roof.
What is needed is to enter x,z coordinates into Corel Draw to define the shape, then plot the result on paper, verify by holding the paper to the actual roof, and then cut the wood using the paper template.I can see that a B-spline is needed, but I don't see how to enter the periodic x,z measurements in Corel to come up with the shape.
View 5 Replies
View Related
May 15, 2012
I upgraded to x5 from corel 11 last year. Crashes frequently and corrupts file. I have to make copy after copy to keep from loosing all of my work. I am at the point I can not do my work. Sometimes files just become so slow and then just crash. I can take the same file that is slow, save as ver 11 and open in corel draw 11 and works great. I have never had so many problems with a program in my life. I am now downloading hotfix 4 and service pack 3 and will install, but I am not very optimistic.
There is not particular situation that the files cause the program to crash. It is nothing that complex. Seems to be often when I try to save or when I have multi pages.
Here is my system info.
Operating System MS Windows 7 64-bit SP1CPU Intel Core i3/i5/i7 @ 2.10GHz 52 °C Sandy Bridge 32nm TechnologyRAM 3.93 GB Single-Channel DDR3 @ 665MHz (9-9-9-24)Motherboard Hewlett-Packard 167C (CPU 1) 51 °CGraphics Generic PnP Monitor (1366x768@60Hz) Intel(R) HD Graphics FamilyHard Drives 313GB TOSHIBA TOSHIBA MK3261GSYN (SATA)
View 14 Replies
View Related
Jul 27, 2011
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
View 4 Replies
View Related
Jan 31, 2013
When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
Version 16.2.0.998 on 64bit, Win 7.
View 3 Replies
View Related
Oct 1, 2013
Photo-Paint crashes when saving twice out of three times...
When I edit a bitmap object from Draw, I always have to start my editing over and over.I lose my object. So...I do a workaround...I export the selected object, open it in Photo-Paint to edit it.
When saving...same thing. Except, the file saves properly. It's just that Photo-Paint crashes.
It used to do that with my older X4 version as well...I skipped the X5 and when on to the X6.
It still crashes, but even more...thing is...Both programs were installed on two different computers.
View 4 Replies
View Related
Jun 17, 2009
I'm running Coreldra X4 on a windows vista machine. Lately I started having a courious problem with Coreldraw x4. When a try to open a cdr file before opening CDX4 i get an error message saying that the file dos not exist. after this CDX4 crashes.
On the other side if I open CDX4 and then try to open the very same cdr file everything is ok.
View 5 Replies
View Related
Jun 30, 2012
I successfully installed CorelDraw X6 but I am unable to open it. It starts to load and then it crashes. At first I thought it was a bad install, so I uninstalled and reinstalled and it still won't open. Norton AV was turned off during both installs. I have searched and see that quite a few users have the same problem but I haven't found a cause or solution. I'm using Windows 7 64 bit, Intel i7, 16 GB ram.
View 13 Replies
View Related
Apr 7, 2011
I have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies
View Related
Jul 16, 2013
CORELDRAW 12 crashes on opening files.. I get the crash wisdard saying it is unstable..
it worked a few hours ago... this is my work computer. i use program to make silk screens
I am running windows 7
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDRW.exe Application Version: 12.0.0.458 Application Timestamp: 3fced9b6 Fault Module Name: CdrSty.dll Fault Module Version: 1.0.0.458 Fault Module Timestamp: 3fceecf3 Exception c0000005 Exception Offset: 000091c1 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 9779 Additional Information 2: 9779cefde9fcb36e63d4c28219879671 Additional Information 3: 537f Additional Information 4: 537f578d5c430251a71245316ee5988f
is it the CdrSty.dll file i need to reinstall. where to find and how to install
i did find a ziped copy of CdrSty.dll but do not know where to place it..
yes i put in the orignial disk and try to repair it severial times..( said it installed all i needed)
unistalled the program and reinstalled it vie: the original disk several times and still no go.
View 14 Replies
View Related
Apr 14, 2010
We have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
View 11 Replies
View Related
Dec 27, 2013
I have the entire subscription of 'Corel 6X'. I have been using it for a few months with no problems, even after I did the 8.1 update. Now all programs will load and run except for 'Draw 6X', it starts to load and then it will start to 'load environment' and then crash. As I said above, every other part of the suite open and run fine.
I can give you no information about updates or version as it won't load so I could check for updates. I searched for other post, and it returned no other similar problems listed for 'Draw 6X'. If I get no answers I'll just un/re install that program itself and see if that fixes things.
I am on a Dell PC with plenty of everything running Win 8.1 64 bit and running the online yearly subscription of 'CorelDraw 6X' 64 bit version that was up to date and working fine on 8.1 fine for more than a month. Now the 'splash' screen shows and gets to 'loading environment' and then the quaint Win window comes out 'There is a problem and windows has to close this program'.
"The only way is through!"cb'99'
View 3 Replies
View Related
Mar 13, 2012
Corel Crashes after I applied the updates 1-3 & 4 in CorelDRAW X5.
Every time I go to combine a powerclip (basically recombine a previously broken apart powerclip) Corel Crashes. Again, there were no issues until I installed the hot fix (SP 3 & 4)Operating System: Windows 7 Ultimate 64bit, 16gb Ram, 280gb solid state drive..net Framework is all up to date.I sit here all day designing websites.
View 15 Replies
View Related
Mar 7, 2012
I need to make PDFs in PageMaker 6.5 that I can import into CorelDraw12. When making the PDF I have selected "embed all fonts" (I do not have the "convert to curves" option.) but the fonts are not being converted to curves. When imported all fonts display in Corel as artistic type or are substituted. Is there a way to convert fonts to curves in Pagemaker?
View 2 Replies
View Related
Jul 19, 2013
I know how to use the transparency tool to make and object partially transparent but is there someway to make an entire object transparent so that what you put behind the object shows through? I am using the symbol of our logo and want to put pictures behind it so that they show though.
View 5 Replies
View Related
Mar 25, 2011
How do I make a bitmap become transparent using CorelDraw and Corel Photo Paint?
View 1 Replies
View Related
Aug 13, 2011
I want to make pattern papers using layers and have found this tutorial of someone using Photoshop CS3. How would this work in X5 .....can't get my head around it. How is the colour applied to the black pattern underneath the coloured layer. I have been searching for tutorials on making patterns with overlays all afternoon but they all seem to be done with Photoshop. URL....
View 2 Replies
View Related
Oct 2, 2011
Is it possible to make your own Natural (Media) Brushes and add them to your library?Anywhere a tutorial about this how to go about?And I assume that it should be possible to design your own symbols as well.
[URL]
View 2 Replies
View Related
Jan 17, 2013
my corel crashing every time I try to select the color palette menu in the window dropdown, try to change the palette in the solid fill color window, and also in the outline color window. I have tried changing the color preset, reinstalling, resetting to defaults, am updated to the newest version (15.2.0.686), installing the hot fixes, blah, blah blah....... everything.
Win7 sp1, 12 gigs ram, i5 64 bit.
View 6 Replies
View Related
Jan 5, 2013
I have been working in this file for weeks, but now I did the sp2 update and when I try to open the file, the font substitution dialogue box opens. No matter which option I select, it causes the program to crash and close.
View 1 Replies
View Related
May 12, 2013
X6 becomes very unstable when using fills with vector patterns. There is, for whatever reason, a lower limit for the size of the pattern (1 inch) that is way to high for most textures, so the only way to work around is to calculate the wanted size of the pattern tiles, enlarge the object accordingly, fill it, assign the size with object attribute and renormalize the size of the object. This used to work fine in prior versions, but X6.3 already crashed several times instantly or soon after the procedure at my site. This is not amusing.
Is there maybe another way to get past the silly one inch pattern size limit?
used hardware: Dell Precision T-7500 workstation / Xeon 5680 6core @ 3.3Ghz / AMD Firepro 8800 / 16 GB RAM / Win7x64
View 9 Replies
View Related
Nov 30, 2012
When I go to open the displace filter it just crashes .
View 2 Replies
View Related
Aug 19, 2011
I recently bought a new laptop with Windows 7 64 bit OS, and installed the CorelDraw X5(worked fine on an older XP machine) on it, the application crashes every time when the progress showing "Creating Application Environment". I tried to run it under XP compatible mode, tthe only difference is now the Regstration works, but the app still crashes every time.
View 1 Replies
View Related
Sep 15, 2013
I'm a long time Corel user trying out Coreldraw suite 6. I'm having a problem making some shape tools work on text (they work fine on other objects). If, for example, I write a piece of text and then select it, followed by the smear shape tool, most of the time the text is deselected and the tool does nothing. However, the Shape, Smudge and Roughen brushes work OK. I've tried using different fonts and text attribute to no avail. I've tried L&R clicking, holding the button down and double (and multiple) clicking slowly and quickly. But no deal. It's not a mouse or pad problem, it's the same on both.
BUT...guess what, every now and then it decides to work! Sometimes it will work on a piece of text and later won't work on it again.
View 3 Replies
View Related
Mar 9, 2012
I have a series of points that I calculated (x-y data pairs, they're conic sections from calculus if that matters), and I want to import those points and then sometimes fit either a) a line or b) a curved rectangle (like, a really wide line) that follows these data points.
View 2 Replies
View Related
May 11, 2011
I just got a new computer. I am currently making a postcard and the text won't type...
My old computer was Windows XP and my new computer is Windows 7. It installed with no problem.
View 7 Replies
View Related
