I'm having problems updating.I downloaded the update, but when going to install, is still on the screen and the update does not continue the upgrade process.
View 3 RepliesSay I've drawn a few curves on a layer with the bézier tool, and I want to go back to some that I did earlier and add to them. I'm trying to do this and it won't let me; it wants to start a new line.
View 3 Replies View Relatedi installed the update update x3, but corel open at the start a window "Problem at the Download Update2.exe". Although at ending corel.
View 3 Replies View RelatedI get the following error message when I attempt to update X6. Not sure what to do about it.
CRC error: The file C:ProgramDataCoralDRAW Graphics Suite X6.1CGS16w_cproc_p_11.1.048_redist_intel64.exe doesnt match the file in the setup's .cab File. The medium from which you are running the setup may be currupted; contact your software vender.
Can you get the clipart with an upgrade in X4 in X5.
View 2 Replies View RelatedCorel X4 and all other versions before, Autocad & 3DS Max, create nifty graphic in Corel, export as image (jpeg 90% of time), Hit render in Acad & 3ds, tweek graphic in Corel - export again, hit render again, over and over and over until result is satifactory.
Corel X5, same process UNTIL I render once in Acad or 3ds, then try to export same jpeg from Corel then bam, "Cannot access file because it is being used by another process", this has to be a joke, right ? I have to shut down Acad AND OR 3ds then export out of Corel, then launch and reopen Acad & or 3ds file.
This is what I do at work all day long, I currently have reinstalled Corel X4 just so I can continue to work.The exported file is not being edited or used at the time I export form Corel, Coreldraw THINKS it is being used. The file is only being used during the time it takes to be rendered, I have been doing this for years and have never got a file locked message before.
Things I have tried to remedy this.
1. Look at the security properties of the actual exported image file, everything is set to full control for everyone & I dont see anything about file locking.
2. Scanned the "options" & "customization" section in Coreldraw, I cannot see anything that would control a setting like this.
3. Unchecked all options in jpeg export dialogue except anti-alias, I knew this had nothing to do with it but you leave nothing left to chance.
I cannot think of any program that a typical user may have on their Windows machine to test this out, I know when you open an image in an editor like MS Paint, you of course cannot overwrite the image file from another program, that is what Coreldraw X5 believes is the situation, but it is not.
export a jpeg from Corel X5, click on the jpeg and it will open in Windows Photo Viewer, keep it open in the viewer then change the graphic in Corel, export it again to the same file name, it will ask if you want to overwrite it, say yes, it WILL NOT say that the file is in use, export it, then close the Windows viewer, open the same file in the viewer, it has not changed from the original export, THAT is crazy beyond words, I have never seen a process on a computer being completed with no error message while the process was never actually done, that goes beyond the current intelligence of computers, and I believe this is the crux of the problem.
I just upgraded to X5 (from X3). Many of the fonts that I have in my used are missing. I went through the Bit Stream Font Navigator and cannot located them there either. Many of my existing customer files require those fonts for use in their logos...etc. I also went to myfonts as indicated and did not see them there.
View 2 Replies View RelatedI have a subroutine i wrote that works fine.Just not sure how to turn it into a batch processor so i can apply it to all the files in a directory. And would I just run it like i run the non-batch version, like, from a document? Or is there some kind of batch process setup in corel where I can just load a sub and point to a folder and run it, like illustrator?
View 8 Replies View RelatedI cleared the temp/cache on my Windows 7 64 bit that has been running CorelDraw Suite 6 since its release. Never an issue. Now, after installing the latest upgrade the program Coreldraw loads just fine and it opened my most current file. After changing a letter in the text box the program crashes. You get a popup window that Coreldraw has closed. I rebooted my machine and it does this each time the program is reloaded.
I went through the common causes of Coreldraw issues and nothing is left to remove or change. Clearly the latest upgrade is flawed and instead of fixing performance issues it has created one that stops the program from working.
I upgraded another computer and the same issue appears after the upgrade. I did a system recovery and now Coreldraw will not open .cdr files into Coreldraw. It now shows a filter error and no file will open.
I am having issues with the batch process function with X6 photopaint.
that is a simple conversion of 20 or more images from TIF to CPT. i get the message
"Images failed to load. Some formats are not supported for batch processing". I have never encountered this problem before.
I need to know if i can make a file into a process color like cmyk for plates. How would i do that
View 5 Replies View RelatedI have a palette provided by Roland for their digital printers to match their standard colors. In order for the colors to be recognized and converted by the RIP, they need to be set as spot colors in CorelDraw X5.
It would be nice if I could change the Treat As Process/Spot attribute for multiple colors at once in the palette editor.
I peeked at the CPL file--unfortunately it's not something easy to edit like XML, CSV or the like. Too bad that, too.
how I can get update patches 6.2 and 6.3 for CDX6. On the [URL]6.1 and 6.4 updates are the only ones available.
View 2 Replies View RelatedCorelDRAW 12 successfully installed on a new machine running Windows 7 Professional 64-bit; however, when attempting to run the SP1 patch (CGS12SP1EN.msp), I get the following message:
"The wizard was interrupted before CorelDRAW Graphics Suite 12 could be completely installed."
I have tried "Corel Draw 12 and vista" which attempted to run the Microsoft installer through the command prompt running under Administrator, but it doesn't work.
X6.I'm not sure of the correlation, but it seems that ever since I downloaded the recent update, the colours (including black/grayscales) in the RGB vs CMYK palettes look different. What I mean is, I have the RGB and CMYK palettes right next to each other, and they used to look identical; now all the CMYK ones look lighter/washed-out than before.Or could it have been a recent Windows update?
View 4 Replies View RelatedCan we stop the orange update text bar from appearing in X6?
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it [URL]....
When you right click on a divider bar on the menu you used to have a option to import or export the work space,now it looks like the screen shot on the right. ( I didn't have a screen shot of X6, but it looked a lot like the X4.)Why does things that work well in CorelDRaw keep getting changed?
View 6 Replies View RelatedI have a client, who have a CorelDraw X6 software. After a virus attack I try to reinstall and upgrade to the software. The installation went well, but the the 4th update has failed:
View 3 Replies View RelatedI have been working in this file for weeks, but now I did the sp2 update and when I try to open the file, the font substitution dialogue box opens. No matter which option I select, it causes the program to crash and close.
View 1 Replies View RelatedYesterday i work normal on my PC and after the windows Updates from today my Corel doesn´t start.
@ frist I try ti uninstall all updates from Microsoft and restart my PC.
My System:
Win7 64 (a Complete new installation)
VMWare Mashine
4 Core
8 GB RAM
WARNING/ Windows update crash X6
View 14 Replies View RelatedI have lost the print preview after 6.2 update. Is there any solution or am missing something at.
CDGS x6.2 - v16.2.0.998Environment: MS Windows 8 Pro 64-bit OSHardware: Intel DG45ID, Core2 Quad CPU Q8300 @2.5 GHz, Memory DDR2 8GB
Is there a legal way to perform the update / patch - Install (Corel Draw Suite X6) without online access?
View 1 Replies View RelatedI downloaded X6 patch #1 with no problem, but then I downloaded patch #3 and when I press Continue to install I get a notice: An Internet connection required. connect to the Internet and try again... But I AM connected to the Internet! I have no options how to proceed.
View 3 Replies View RelatedI used an image in the design on 20 pages. now the requirement has come to update that image but I don't want to go on every page and update it.
is there way, I will updated it once and it will update automatically on the other pages
After updating silverfast software to a newer version then SF-8.0.1r24(AFL)_x86, Corel X5 and X6 did crash when opening a file.
It didn't uninstall Silverfast or to reiinstall Corel X5 or X6.
Only reloading th whole computer (Windows 7 Pro) from an earlier image did work. But when installing the silverfast Update, the same thing happened.
Silverfast says, they don't install anything into Corel suite. I should ask Corel about the problem ...
Everything else keeps running fine after the silverfast update.
The management of the importation of externally linked images still has the problem in previous versions.
1) You can't import more than one picture at a time, externally connected simultaneously in the document.
2) If you move the picture within it, in a new folder, there is the possibility of assigning the new path to more 'photos at the same time but only one at a time.
So if I have 100 photos to be updated with the new path I have to do with each photo. While it would be much more logical to assign the same path to more 'selected photos.
I have been upgrading to X6 from X5. I wanted to install a CorelDRAW macro called "Function Plotter", written by Alex Vakulenko, into X6. When upgrading from X4 to X5 I just manually placed a certain file (Plotter14.gms) into the Draw GMS folder in the program directory. Then back in CorelDRAW X5 I choose Tools > Options > Customization > Commands in order to place an icon in the toolbar, making access to the macro. It worked back then. However when I try the same procedure in X6 it doesn't work. I can see the file under "Commands" and place an icon, but nothing happens when I press the button. Maybe it has something to do with 64 bit, which from what I can see in this Forum causes a lot of trouble (scanner drivers, plugins, etc)?
This macro is extremely important for me. I have tried contacting Alex, but with no success so far. In the meanwhile I need to install X5 again..
piral tool doesn't look right? Or is it a math bug?
View 8 Replies View RelatedAfter a likely upgrade to windows update opentype fonts are no longer 'displayed in coreldraw X3 X4 X5 X6 on any computer. it was necessary to restore the computer to the previous date, coreldraw uninstall and disable automatic updates. The problem is only on Coreldraw. In word and photoshop fonts were displayed correctly. The problem is serious because many studies have Opentype fonts and files appear blank.This update from window I will not have 'never install it?
View 1 Replies View RelatedWhenever I edit text in the pop-up dialog, there is usually an extra line inserted at the top of the text (a blank first line). I can't get rid of this extra line through the pop-up edit window, I can only delete it using the text tool directly on the page. This only started with the latest update.
View 2 Replies View Related