I have a client, who have a CorelDraw X6 software. After a virus attack I try to reinstall and upgrade to the software. The installation went well, but the the 4th update has failed:
View 3 Repliesi installed the update update x3, but corel open at the start a window "Problem at the Download Update2.exe". Although at ending corel.
View 3 Replies View RelatedI get the following error message when I attempt to update X6. Not sure what to do about it.
CRC error: The file C:ProgramDataCoralDRAW Graphics Suite X6.1CGS16w_cproc_p_11.1.048_redist_intel64.exe doesnt match the file in the setup's .cab File. The medium from which you are running the setup may be currupted; contact your software vender.
Level Equalization was a tool that I used constantly in PhotoPaint 8. By version 10, it had disappeared for no obvious reason. It was a really vauable tool. Fortunately, I still have PhotoPaint 8 on the system, but it tends to introduce other problems, so I rarely go back to it. It would be handy to have that tool back. X3 has something called Local Equalization and another option called Histogram Equalization, neither of which seems to do anything useful.
In fact, both Histogram Equalization and Local Equalization thoroughly screw up any image that I test on them. I don't have a clue as to why they are even there, since they absolutely don't work, whereas the original Level Equalization worked really well.
Is there a way to "steal" the transparent level of a bitmap image?
[URL]
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
how I can get update patches 6.2 and 6.3 for CDX6. On the [URL]6.1 and 6.4 updates are the only ones available.
View 2 Replies View RelatedCorelDRAW 12 successfully installed on a new machine running Windows 7 Professional 64-bit; however, when attempting to run the SP1 patch (CGS12SP1EN.msp), I get the following message:
"The wizard was interrupted before CorelDRAW Graphics Suite 12 could be completely installed."
I have tried "Corel Draw 12 and vista" which attempted to run the Microsoft installer through the command prompt running under Administrator, but it doesn't work.
X6.I'm not sure of the correlation, but it seems that ever since I downloaded the recent update, the colours (including black/grayscales) in the RGB vs CMYK palettes look different. What I mean is, I have the RGB and CMYK palettes right next to each other, and they used to look identical; now all the CMYK ones look lighter/washed-out than before.Or could it have been a recent Windows update?
View 4 Replies View RelatedCan we stop the orange update text bar from appearing in X6?
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it [URL]....
When you right click on a divider bar on the menu you used to have a option to import or export the work space,now it looks like the screen shot on the right. ( I didn't have a screen shot of X6, but it looked a lot like the X4.)Why does things that work well in CorelDRaw keep getting changed?
View 6 Replies View RelatedI have been working in this file for weeks, but now I did the sp2 update and when I try to open the file, the font substitution dialogue box opens. No matter which option I select, it causes the program to crash and close.
View 1 Replies View RelatedYesterday i work normal on my PC and after the windows Updates from today my Corel doesn´t start.
@ frist I try ti uninstall all updates from Microsoft and restart my PC.
My System:
Win7 64 (a Complete new installation)
VMWare Mashine
4 Core
8 GB RAM
WARNING/ Windows update crash X6
View 14 Replies View RelatedI have lost the print preview after 6.2 update. Is there any solution or am missing something at.
CDGS x6.2 - v16.2.0.998Environment: MS Windows 8 Pro 64-bit OSHardware: Intel DG45ID, Core2 Quad CPU Q8300 @2.5 GHz, Memory DDR2 8GB
Is there a legal way to perform the update / patch - Install (Corel Draw Suite X6) without online access?
View 1 Replies View RelatedI downloaded X6 patch #1 with no problem, but then I downloaded patch #3 and when I press Continue to install I get a notice: An Internet connection required. connect to the Internet and try again... But I AM connected to the Internet! I have no options how to proceed.
View 3 Replies View RelatedI used an image in the design on 20 pages. now the requirement has come to update that image but I don't want to go on every page and update it.
is there way, I will updated it once and it will update automatically on the other pages
After updating silverfast software to a newer version then SF-8.0.1r24(AFL)_x86, Corel X5 and X6 did crash when opening a file.
It didn't uninstall Silverfast or to reiinstall Corel X5 or X6.
Only reloading th whole computer (Windows 7 Pro) from an earlier image did work. But when installing the silverfast Update, the same thing happened.
Silverfast says, they don't install anything into Corel suite. I should ask Corel about the problem ...
Everything else keeps running fine after the silverfast update.
I'm having problems updating.I downloaded the update, but when going to install, is still on the screen and the update does not continue the upgrade process.
View 3 Replies View RelatedThe management of the importation of externally linked images still has the problem in previous versions.
1) You can't import more than one picture at a time, externally connected simultaneously in the document.
2) If you move the picture within it, in a new folder, there is the possibility of assigning the new path to more 'photos at the same time but only one at a time.
So if I have 100 photos to be updated with the new path I have to do with each photo. While it would be much more logical to assign the same path to more 'selected photos.
After a likely upgrade to windows update opentype fonts are no longer 'displayed in coreldraw X3 X4 X5 X6 on any computer. it was necessary to restore the computer to the previous date, coreldraw uninstall and disable automatic updates. The problem is only on Coreldraw. In word and photoshop fonts were displayed correctly. The problem is serious because many studies have Opentype fonts and files appear blank.This update from window I will not have 'never install it?
View 1 Replies View RelatedWhenever I edit text in the pop-up dialog, there is usually an extra line inserted at the top of the text (a blank first line). I can't get rid of this extra line through the pop-up edit window, I can only delete it using the text tool directly on the page. This only started with the latest update.
View 2 Replies View RelatedMy fully activated CorelDRAW X4 turned to trial (0 days left) after performing a windows updating (XP x86) .
Upon launching, a window pops up "No asset found for trial download (license ID: 540228824) with 0 day(s) left, source type 1, lang en and source ID 810007 " and basic features as save, export, scripts, etc are disabled
The about window presents the information correctly of my fully activated CoreDRAW, Owner, serial, version (14.0.0.701)
I do a LOT of photo editing while using CorelDraw X6. It was really handy to launch the photo editor with the icon. How can I get it to launch, again?
View 7 Replies View Related1, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
I'm having a major issue here, I use custom colors (created in my custom palette), X^ used to hold it very nicely, even in PDF exports etc.
Now - with the latest update, X6 "forgets" the custom colors, it resets it to default color, I have to manually set every object to the custom color all over again.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?