1, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
This bug is still an issue, even with the latest update (16.2.0.998). Is there any a chance of a fix before the next update?
View 6 Replies View RelatedThe management of the importation of externally linked images still has the problem in previous versions.
1) You can't import more than one picture at a time, externally connected simultaneously in the document.
2) If you move the picture within it, in a new folder, there is the possibility of assigning the new path to more 'photos at the same time but only one at a time.
So if I have 100 photos to be updated with the new path I have to do with each photo. While it would be much more logical to assign the same path to more 'selected photos.
Most of my Command Line Commands have stopped working !!! I noticed when I wanted to mirror/flip an object, I could not get those Command Line commands to "expand". When I tried other Command Line commands under "Image", "Effects", etc, most of these would not work either.
View 12 Replies View RelatedFor some reason i can no longer copy and paste text from one page to another properly.
I write the text out as normal (not using a text box) but when i copy and then try to past to another page it then does several other things.
It changes the font and cap height, puts it onto a text box and centres it on the page?
If i copy and paste text along with an object (say a simple box) everything copies and pastes perfectly, just not text on its own
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies View RelatedI have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies View RelatedI've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies View RelatedIn my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedAll of a sudden my Copy Function quit working in Corel x5.
I can copy from other programs and paste into Corel, but I cannot copy from one file to another file (or the same file even) within Corel.
I was told it could be a possible update from Windows 7 causing it and that I need to reinstall my software.
Copy drop shadow properties is not working for me. When I click on the object to copy to, it tells me, "you did not click on an object." What do I need to do?
Edit: actually, I'm seeing that this is not working in Contour, either. And it may not be working in other effects as well, although I haven't tested those.
I am using CorelDRAW X4. I would like to add the Screen Dots to my texts or objects, but I don't know what to do, so who knows about this?
View 14 Replies View RelatedI have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
i installed the update update x3, but corel open at the start a window "Problem at the Download Update2.exe". Although at ending corel.
View 3 Replies View RelatedI get the following error message when I attempt to update X6. Not sure what to do about it.
CRC error: The file C:ProgramDataCoralDRAW Graphics Suite X6.1CGS16w_cproc_p_11.1.048_redist_intel64.exe doesnt match the file in the setup's .cab File. The medium from which you are running the setup may be currupted; contact your software vender.
If there is a way to create a new command under the customization tab. The reason I ask is that I use the line color 100% black, 30% Black (It is in the commands already) and red. I want to create a new outline command for the color red so that I can use a shortcut key.
View 16 Replies View RelatedIs it possible to create an image with different points that are linked to URL's with CorelDraw Graphics Suite X5? I create wordpress websites for clients and I have a client that wants a map with "blinking" identifiers for their different locations. Then when you hover over their "blinking" identifiers they want an image of that location to pop up. Any thoughts on how I could handle this?
View 14 Replies View RelatedI am looking for a plugin / macro or something regarding externally linked files that
1. enables custom (or full) resolution of the file preview
2. adds edit option that edits the file in its assigned application (eg .psd in photoshop)
3. then after saving by that application, having the preview in CD being updated, if not automatically, at least by means of a click
(i can't grasp yet why still after all those years, things like externally linked files and text styles are still in that primitive, not really serving any purpose, or working, form ..... why basic, key DTP features that are supposed to have so powerful potential are being so severely neglected ... really beats me)
There are:1. Linked .jpg 91x141mm 600dpi, RGB - bad preview.2. Near the Linked .jpg 177x177mm 150dpi, RGB - good preview.
CDR Document is 150dpi, RGB.For good preview needed exact dimensions and resolution?
I'm wanting to cut a shape out of a rectangle from a macro. I need to do this on hundreds of files. I tried to do the following while recording a macro:
Select all shapes
Run Arrange->Shaping->Back Minus Front
However, this just results in this comment being recorded: "Recording of this command is not supported: ShapingCommand"
How to call the shaping commands from VBA? I've dug through offline and online documentation and have come up with nothing.
I'm wondering why, all of a sudden, the pasteboard area around the page is tied directly to the page. Example: If I draw full-scale out in the pasteboard area on page #1, then go to page # 2 or whatever, everything in the pasteboard area disappears. In a multi-page document this is really a problem as I have to click on every page to find out where my full scale drawing is. It wasn't always like this. What ever was out in the pasteboard area was always visible no matter what page I'm on. How do I reset so the pasteboard is unaffected by which page I'm on?
View 3 Replies View RelatedIs there any way the images that we externally get permanently bound in the document. I know “collect for output”method but the asked option seems to be more compact.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I have been having a problem with AutoCad 2012 LT when a am working in the model space I can you the ctrl c and ctrl p commands for a short amount of time and then they will not work. I can open a different model space and they will work in that one, but when I go back to the original one the will not work. I have tried shutting down autocad and the computer, but when I open everything back up the commands still will not work in that model space. I have reinstalled autocad and that brings them back for a short amount of time.
View 5 Replies View RelatedIs there a way to easily and quickly extract all commands listed as well as the icons? I hate pressing F8 at startup!
View 1 Replies View RelatedIs there an updated copy of the macro Paste from AI anywhere to be found?
The one at Oberon is only for X4 but seemed to work in X5 but not X6.
how I can get update patches 6.2 and 6.3 for CDX6. On the [URL]6.1 and 6.4 updates are the only ones available.
View 2 Replies View RelatedCorelDRAW 12 successfully installed on a new machine running Windows 7 Professional 64-bit; however, when attempting to run the SP1 patch (CGS12SP1EN.msp), I get the following message:
"The wizard was interrupted before CorelDRAW Graphics Suite 12 could be completely installed."
I have tried "Corel Draw 12 and vista" which attempted to run the Microsoft installer through the command prompt running under Administrator, but it doesn't work.
X6.I'm not sure of the correlation, but it seems that ever since I downloaded the recent update, the colours (including black/grayscales) in the RGB vs CMYK palettes look different. What I mean is, I have the RGB and CMYK palettes right next to each other, and they used to look identical; now all the CMYK ones look lighter/washed-out than before.Or could it have been a recent Windows update?
View 4 Replies View RelatedCan we stop the orange update text bar from appearing in X6?
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it [URL]....