CorelDRAW Graphics Suite X6 :: Copy / Paste From And To Multi-column Text Box?
Apr 5, 2013
I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
View 4 Replies
ADVERTISEMENT
Mar 30, 2012
For some reason i can no longer copy and paste text from one page to another properly.
I write the text out as normal (not using a text box) but when i copy and then try to past to another page it then does several other things.
It changes the font and cap height, puts it onto a text box and centres it on the page?
If i copy and paste text along with an object (say a simple box) everything copies and pastes perfectly, just not text on its own
View 9 Replies
View Related
Nov 28, 2011
For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
View 2 Replies
View Related
Apr 5, 2013
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies
View Related
Oct 26, 2012
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies
View Related
Aug 28, 2013
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies
View Related
Dec 4, 2012
1, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
View 12 Replies
View Related
Jun 4, 2012
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
View 4 Replies
View Related
Jun 1, 2011
With X4 I can right click a piece of text - with pick tool - and drag the selected text to an open area and the text is duplicated. With X5 this does not work - text is locked. The only way to duplicate is to copy / paste. Is there a setting that needs to be reset.
View 2 Replies
View Related
Jun 19, 2012
i have a 2 artistic text blocks (both with different fonts) in same corel document and when i ctrl+c/ctrl+v from one to other it copy/paste not only the text but also font type/size and color.
I want just the text copied not all the properties.
View 3 Replies
View Related
Jun 27, 2011
I'm using the macro that's on this page.
[URL]......
If this can be modified to not save the file name as it does now...like this
44649.cdr1.JPG
We need it to save it like
44649-1.jpg
44649-2.jpg
44649-3.jpg
View 5 Replies
View Related
Jul 15, 2010
When I step & repeat the crop marks are not there. How I get the crop marks for cutting multi up items.
View 5 Replies
View Related
Sep 21, 2012
We can make multi master pages for ODD and EVEN pages.
View 1 Replies
View Related
Jun 28, 2012
Is there an updated copy of the macro Paste from AI anywhere to be found?
The one at Oberon is only for X4 but seemed to work in X5 but not X6.
View 9 Replies
View Related
Sep 30, 2013
When importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.
View 2 Replies
View Related
Oct 5, 2011
Im wanting to create a multi-layered airbrush stencil from a photo of a pin-up. How do I do this?
View 1 Replies
View Related
Jul 2, 2012
I have recently upgraded from corel 12 to X6. I work in SignLab e6 on my production computer. Now since I have upgraded when I export files from x6 and import them into SignLab e6 they will not import unless I change everything to 1 color. If it does export the file as full color, when I import the file it is converted to 1 color. This takes a lot of time to re color everything. I typically have to export files from Corel as .EPS in order for the file to import into Signlab with best quality, but have been using the CMX (legacy) lately with same results. I dont understand why I have to convert them into 1 color nor why they convert from full color to 1 color.
View 10 Replies
View Related
Dec 20, 2012
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies
View Related
Jul 25, 2011
I have drawings created in X5 taht i need to put into word documents, i have in the past done this many times with no issues, i now have a drawing that will paste in, but some objects are missing, and some text is missing.
I have tried all of the Paste special options, the only one that will put all objects in is bitmap, with all others objects are missing.
If i print as PDF all objects are there, if i Export the graphic for Office, using compatibility mode places all objects, but if i choose editable mode the same objects disappear
View 7 Replies
View Related
Oct 9, 2013
How do you paste a website domain name without causing the underline for hyperlink?
When I copy and paste text which includes a website link [URL] how do I stop or prevent the underline? I have tried changing the options in the page setup for text for automatic Hyperlinks but that does not stop the underline when pasting text
View 13 Replies
View Related
Oct 29, 2013
Is there a way to copy a portion of a drawing in X6 for instance to replicate the portion inside the red square only.
View 9 Replies
View Related
Mar 2, 2012
I have a problem with each time I move a image, it makes a copy for the last position.
What setting would cause this?
View 5 Replies
View Related
May 24, 2013
What is happening with objects that are extruded on page 1 being copied to page 2
and the extrude flies out of rage, is that some sort of special effect ?? I wish I could animate it.
View 13 Replies
View Related
Apr 26, 2012
When i copy the property using the copy fill property dialog box the gradients are not copying exactly, see the video
[URL].......
View 2 Replies
View Related
Oct 2, 2013
Is there a way to copy the names of all the fonts I have listed in X-5 so that I can print the list?
I want to be able to check some things off the list and add other fonts to the list.
I tried opening the font list and highlighting to copy it to a clipboard.
View 2 Replies
View Related
Oct 10, 2012
I will attach a cdr picture. Nothing wrong with it, until I save it as svgz. I don't get an exact copy of the original. Things are moved. When I save it in version x5, I can save it as a perfect copy to svgz. What is the problem with x6?
View 3 Replies
View Related
Jan 23, 2013
Something strange happened today when I was working on a cdr project. I think I have by mistake somehow managed to completely delete the original rgb palette, copied the cmyk palette and saved it as "rgb" palette. As a result if I try to change the color palette, the rgb and the cmyk options are exactly the same palettes.
This happened whilst I was working on a cdr drawing. Somehow I managed to press a wrong key combination whilst trying to save (probably CTRL-something and then CTRL-S immediately after) and noticed that the colors on my drawing changed. I tried to undo, but nothing happened.
After some checking I realized that the original rgb color palette has been replaced with a copy of cmyk. If I now try to switch color palettes, the cmyk and the rgb are exactly the same palettes regardless of which cdr project I open (new or saved).
This is how I tried to fix the issue:
I tried F8 during startup - no change
I tried with the repair option of the installation cd - no change
I tried a removal and a new installation of the Suite - no change.
Could be worth a try: Maybe someone could send me a copy of their rgbstd.cpl-file so that I could replace mine in the C:Program Files (x86)CorelCorelDRAW Graphics Suite X4LanguagesENProgramsData
How to restore the rgb color palette to it's original status as I work mainly with drawings displayed on the net, not on printed materials and I'm getting desperate as I have a deadline tomorrow.
View 8 Replies
View Related
Oct 3, 2012
All of a sudden my Copy Function quit working in Corel x5.
I can copy from other programs and paste into Corel, but I cannot copy from one file to another file (or the same file even) within Corel.
I was told it could be a possible update from Windows 7 causing it and that I need to reinstall my software.
View 10 Replies
View Related
Oct 16, 2010
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
View 3 Replies
View Related
May 9, 2011
I have a word that has an orange outline. Then it has a transitional blend going from yellow to the same orange as the outline.
I have worked out that I can use the eye dropper tool then use the right mouse button with the fill bucket, this will give me the color that the eye dropper picked.
But how do I then use the eye dropper tool to do a fountain fill. The yellow I need to copy is not a standard color that is found on my colors to my right. So I need to some how use the eye dropper tool to set the first and second transition colors.
View 4 Replies
View Related
Jun 14, 2013
Copy drop shadow properties is not working for me. When I click on the object to copy to, it tells me, "you did not click on an object." What do I need to do?
Edit: actually, I'm seeing that this is not working in Contour, either. And it may not be working in other effects as well, although I haven't tested those.
View 3 Replies
View Related
