CorelDRAW Graphics Suite X6 :: Copy And Paste And Opening / Saving Files Really Slow?
Aug 28, 2013
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
I opened a document and it popped up a messages asking if I want to revert to the saved version YES or NO. This is weird because I didn't try to open the document twice. I suspect it is a macro that was causing this problem but I have many so it could take a while to locate the culprit. I also suspect a windows 7 update may have caused an interference with the macro.
When I open a file it takes about 3 to 10 min, even more. I make rubber stamps so my files contain circles with text fitted on it and no more than 10 rubber stamps models.
I reinstalled Corel Suite but no hope.
If I create a new file, draw a rectangle (or a rubber stamp) and save it, the next time this file opens instantly. If I open an old file, after finally opens, I delete everything in it and save it, the next time it will take several minutes to open. Also, the empty file is about 700 KB long, comparing to a new empty file which is about 12 KB long.
The Corel stuff no longer supports Corel 12 (even if I've seen the same problem on other forums, reported for higher versions, with no real solution).
NB: Old files are the files created before reinstalling Corel Suite; and they are a lot
I've recently got a new computer, and after installing corel on it, I've found that I am unable to open files with corel, as soon as i press the open button corel crashes, but i am able to open the files when i goto the actual file in my documents and click open in there, and i am unable to save files any way whatsoever (due to crashing isues again) i am also unable to export my artwork to a jpeg, also an immediate crash.
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
Upgrading to X6 today due to Windows 7 issues, per IT dept. Right off the bat, all the arrowheads on our lines are gone. We always used third one on the arrowhead drop down, but now we have to select them all and add the arrowhead back in, and then change the other half to point in the right direction.
Bug fix for this or just suck up and change 1K drawings in our library?
I just installed X6 in a new computer ( the old one crashed and burned) I had both X5 & X6 in the old computer. Just installed the X6 in the new one. Several old files created in X5 will not open in X6. When I try to open them - they crash X6. Have taken files to another computer and same happens. These files open OK in X5. I have tried 'resaving them' in X5 to V12 and opening in X6 - Crashes Corel same as before..?
I have a new Corel product...Graphics Suite X4 Home version operating on Windows 7. I have designed several flyers and attempted to save as a PDF file to send to an associate. However the PDF option is not available in the selection box.
So I attempted to download Service Pack 2 for Suite X4 but the installation fails on three attempts.
I am having an issue saving file changes. I can create a file and save it, but if I make a change and try to save it again I get an error that says that the file is open elsewhere.
I have fully licensed X4 version. Last week i was receiving 4 different cdr files (cdr X4), created by other person (lets call him Jack). Files were ok, but there was some grammar mistakes, so I asked Jack to correct them and send files back to me. But! When he did that, I wasn't able to open theese files . My Corel hangs trying to open all of them. And it seems like files are opened and Corel is running, but i can not see anything, even panels...Only gray or white screen is visible.... Today, 12 of April, i received files (created also on version X4) from another person and story repeats. It only happans with some cdr X4 files, other works just fine.
Common thing is that all of them are created on X4 version. I tried several times to reinstall my corel, but it did work. I downloaded trial version of Corel X5 on other PC, there i was able to open them, save for version 14, only then i could open theese files on my pc. But i can not do that all the time. Jack is very active client and trial version is only for a month =). I need to understand is it my Corel problem, or Jacks. But todays events, shows it is my problem. I have a feeling, that it might be some corel updates, which prevent my Legal Corel X4 to open cdr files, created on Pirate Corel X4 version. Can it be true? Conflict between legal and illegal versions... If trully, such updates took place last week
Last week I opened some .eps files into coreldraw 12 without any hitch. But two days later I am unable to open or import any of the eps files. I am unable to find out what is the problem. The files I opened and worked on earlier are now opening as static bmp files or they are just opening as a grey square with adobe illustrator written on it. I tried selected both (eps) and (ps, prn, eps ) from the file type while importing. Also I kept the sort type at default. But still it keeps giving me the invalid file type error.
We have tried this on 5 different machine configurations from XP (SP3) to windows 7 (SP1).
We do magazine outlays and therefore require large files. As soon as we go above certain size ( about 1.7GB), then the file will save. But try and open the file then we get an error. Disassembling the file gives an error on opening hte RIFF file. Try and import then erro is "cannot import empty file".
Quite a few people have given advice on using smaller files, but that is impractical. Our only viable solution at the moment is using files split into 10 to 20 pages each. Importing all the section, then creating the PDF and do not bother to save the complete file. We even went as far as building a test machine with up to 24GB of RAM and all the bells & whistles and only windows barebone + updates, no other 3rd party software except Coreldraw X5.
what the size of file is that Coreldraw X5 can handle? WHere are the limitations and is there a swap file setting?
slow copy to clipboard? I have pinned it down to my virus protection. I use McAfee and I notice that my CPU goes up considerably when I do a copy to clipboard under mcshield.exe. When I turn off the McAfee, copy to clipboard in X6 works fast and perfectly.
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
I find when i open any file i have saved as an X6 file CorelDraw crashes ...the only way it works is if i open a blank template or older file (not saved in x6) first
Several days ago I noticed my files sizes were enormous. I was unable to even open them to work on them. Something that was once 517KB becomes 161MB the next time I save it.
After I installed the Corel update this morning, things were back to working as usual. But tonight it's back to the huge files. I saved a simple greeting card file - no halftones, no gradients, etc. It saved at 19.7MB. A few minutes later after making some small changes - saving again it was now 118 MB.
I tried saving to a lower version of Corel and ver 15 it was the same scenario. When saving to 12, 13, & 14 the files were normal, small sizes. But after a few hours even those versions were saving at huge sizes.
I've had a friend check her computer using the same file - she has the exact same computer & on Corel X6. All of her files are nice and small like they are supposed to be.
I've run virus checks and nothing is coming up. I am on Windows 7 64 bit.
Other than recreating all of my files every time I use them - I have no way of saving usable .cdr files.
We have a certain customer that sends us Corel Draw files with bar codes in them and sometimes the bar codes appear as fonts when I open the files, but sometimes other files come across as bar codes. What causes the bar codes to come across as fonts on some files? Is it something the customer is doing that makes the bar codes come across as fonts?
I am adjusting colours on photos with Photo Paint X6. When I try to save with original settings the OK button in the "Export to JPEG" dialog box is grayed out. There are no error messages or hints on the screen as to what to do to proceed with the save JPEG with orginal settings.
Some saved files will not reopen in CoreldrawX5 showing an error message 'Encountered an improper argument' and that is it! Very frustrating as all the work seems to be lost and needs to be redone.
