I just installed X6 in a new computer ( the old one crashed and burned) I had both X5 & X6 in the old computer. Just installed the X6 in the new one. Several old files created in X5 will not open in X6. When I try to open them - they crash X6. Have taken files to another computer and same happens. These files open OK in X5. I have tried 'resaving them' in X5 to V12 and opening in X6 - Crashes Corel same as before..?
View 5 Replies
Upgrading to X6 today due to Windows 7 issues, per IT dept. Right off the bat, all the arrowheads on our lines are gone. We always used third one on the arrowhead drop down, but now we have to select them all and add the arrowhead back in, and then change the other half to point in the right direction.
Bug fix for this or just suck up and change 1K drawings in our library?
I have Corel Draw x5; our store computer has x4 installed on it. We're having trouble opening files in x4 that were created in x5.
View 12 Replies View RelatedI have fully licensed X4 version. Last week i was receiving 4 different cdr files (cdr X4), created by other person (lets call him Jack). Files were ok, but there was some grammar mistakes, so I asked Jack to correct them and send files back to me. But! When he did that, I wasn't able to open theese files . My Corel hangs trying to open all of them. And it seems like files are opened and Corel is running, but i can not see anything, even panels...Only gray or white screen is visible.... Today, 12 of April, i received files (created also on version X4) from another person and story repeats. It only happans with some cdr X4 files, other works just fine.
Common thing is that all of them are created on X4 version. I tried several times to reinstall my corel, but it did work. I downloaded trial version of Corel X5 on other PC, there i was able to open them, save for version 14, only then i could open theese files on my pc. But i can not do that all the time. Jack is very active client and trial version is only for a month =). I need to understand is it my Corel problem, or Jacks. But todays events, shows it is my problem. I have a feeling, that it might be some corel updates, which prevent my Legal Corel X4 to open cdr files, created on Pirate Corel X4 version. Can it be true? Conflict between legal and illegal versions... If trully, such updates took place last week
Last week I opened some .eps files into coreldraw 12 without any hitch. But two days later I am unable to open or import any of the eps files. I am unable to find out what is the problem. The files I opened and worked on earlier are now opening as static bmp files or they are just opening as a grey square with adobe illustrator written on it. I tried selected both (eps) and (ps, prn, eps ) from the file type while importing. Also I kept the sort type at default. But still it keeps giving me the invalid file type error.
View 5 Replies View RelatedWe have tried this on 5 different machine configurations from XP (SP3) to windows 7 (SP1).
We do magazine outlays and therefore require large files. As soon as we go above certain size ( about 1.7GB), then the file will save. But try and open the file then we get an error. Disassembling the file gives an error on opening hte RIFF file. Try and import then erro is "cannot import empty file".
Quite a few people have given advice on using smaller files, but that is impractical. Our only viable solution at the moment is using files split into 10 to 20 pages each. Importing all the section, then creating the PDF and do not bother to save the complete file. We even went as far as building a test machine with up to 24GB of RAM and all the bells & whistles and only windows barebone + updates, no other 3rd party software except Coreldraw X5.
what the size of file is that Coreldraw X5 can handle? WHere are the limitations and is there a swap file setting?
CORELDRAW 12 crashes on opening files.. I get the crash wisdard saying it is unstable..
it worked a few hours ago... this is my work computer. i use program to make silk screens
I am running windows 7
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDRW.exe Application Version: 12.0.0.458 Application Timestamp: 3fced9b6 Fault Module Name: CdrSty.dll Fault Module Version: 1.0.0.458 Fault Module Timestamp: 3fceecf3 Exception c0000005 Exception Offset: 000091c1 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 9779 Additional Information 2: 9779cefde9fcb36e63d4c28219879671 Additional Information 3: 537f Additional Information 4: 537f578d5c430251a71245316ee5988f
is it the CdrSty.dll file i need to reinstall. where to find and how to install
i did find a ziped copy of CdrSty.dll but do not know where to place it..
yes i put in the orignial disk and try to repair it severial times..( said it installed all i needed)
unistalled the program and reinstalled it vie: the original disk several times and still no go.
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
I find when i open any file i have saved as an X6 file CorelDraw crashes ...the only way it works is if i open a blank template or older file (not saved in x6) first
View 11 Replies View RelatedI am not able to open an old existing file I can see it but when I try to open it I get a message
Contains an invalid object
Click Abort if you wish to open file
Click Retry if you wish to open file
Click Ignore if you wish to open file
nothing happen what should I do ?
We have a certain customer that sends us Corel Draw files with bar codes in them and sometimes the bar codes appear as fonts when I open the files, but sometimes other files come across as bar codes. What causes the bar codes to come across as fonts on some files? Is it something the customer is doing that makes the bar codes come across as fonts?
View 9 Replies View RelatedSome saved files will not reopen in CoreldrawX5 showing an error message 'Encountered an improper argument' and that is it! Very frustrating as all the work seems to be lost and needs to be redone.
View 4 Replies View RelatedI set up for a client of mine a new file server using samba.
Everything is working OK except the browsing/opening of files directly from the network drive, using both X4 amd X5 versions on windows XP and 7.
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies View RelatedI have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I have a lot of pdfs that are A6 format, and need to keep them this size. When I open the document in Coreldraw they open as A4 page (looking at the document properties (although it does look like its the A6 size with a lot of white space around it.
How can I get corel to open it to the correct A6 page size?
I have several Coral Draw-12 files saved in a particular folder. The problem is when i am trying to open a particular file it's fine but, when trying to open a second or third .cdr file (with the first file opened) from the same folder it' s not opening.
View 1 Replies View Relatedi have a problem with CorelDraw X5where the file i open is bigger than A4 and on a custom set page size. and it opens like this.and in signcut it is
i need to edit the file and i dont know why coreldraw X5 is not letting me view the entire file. How i can overcome this or if there are any settings that i may have chanced of hot key shortcuts that i could have pressed by accident. also i have been using draw x5 for about a year put i only use half the program for what i need it for.
I'm sure this has been answered many times before but I've been unable to locate any old threads. I was under the impression that the old import method had gone by the wayside and the file could be opened directly or imported as a pdf?
I have both Adobe CS 4 and Corel Draw X3
all my attempts thus far have failed...
When I try to open an X5 template in X6, nothing happens in X6. I don't receive any error messages. It looks like the template is opening, but I just end up with a blank grey (no file opened) slate. I am using the 32-bit build. Everything else seems fine.
View 1 Replies View RelatedWhen trying to open a coreldraw document sent to me containing fonts that I do not have, I cannot seem to open only as curves and it always wants to replace missing fonts. I am sure I could do this with X3, but not X5.
I just want to import as curves and not substitute fonts.
I'm trying to open a large file (1.2gig) but corel is having a error reading (dialoge box pop up). I have another file 1.19 gig which takes a few minutes to open but is fine.
I have 2gig ram so just wondering what the limit for file size in x3 file is? The file in question was running sweet yesterday so I didn't realise it was so large.
Is there any way to recover the contents ? I can see it in preview so I don't believe it is corrupt....the back-up has the same issues.
I am looking into using CD X5 for my laser engraver, but I am running into a bit of a issue. I have to open PDFs into corel but when I do I lose all the spacing between each word. The font is not subsituted, there is no issue with opening it, and I can rip the file to the output device. I can edit the text by adding a space, I have double hit the space bar to make one space.
View 12 Replies View RelatedWe're having problems opening X5 docuements that contain barcodes on them. When trying to edit the barcode it says "failure to launch server application" and if the barcode is rotated, its stretched to fit the area it was in but its back to the orginal unrotated position.
View 5 Replies View RelatedI noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
Every time I double click on a bitmap in Corel Draw, it opens up Photo Paint. How can I disable this option? I never use it and its a waste of my time because it takes too long to load up! I don't know if my mouse has a problem, but sometimes I can just click once on a bitmap and it triggers the photo paint to open.
View 7 Replies View RelatedI have a problem opening Font Navigator in Windows 7.
When I click the exe startup for Font Navigator Windows 7 asks if it's OK for this program to make changes to my computer. I answer yes, the screen flickers and Font Navigator fails to open.
This is a recent problem and I can't trace it to any changes on my PC. I have completely cleared Corel Suite from the computer and reloaded the applications.
I have a few thousand images that I created using Corel version 12 and X-5
I have been using X-5 for about the past six months or so and when I have to open a hundred images and they open to 60% each time.
Is there a way to select all the image in a folder and have them open to 100% everytime?
Just wondering if I could change the openning settings in a batch.
Have some pics in X4 on Windows 7 but same are not opening in X 12/ Windows 8.
When copied from X4/Windows7 and pasted in X12/Windows 8, icon showing blank and on opening a blank document opens.
Some colors such as yellow are being replaced with other colors in the CMYK palette.
View 4 Replies View RelatedWhen I go to open the displace filter it just crashes .
View 2 Replies View Related
