CorelDRAW Graphics Suite X6 :: 6.4 Has Stopped Opening Documents?
Sep 16, 2013
I noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
When trying to open a coreldraw document sent to me containing fonts that I do not have, I cannot seem to open only as curves and it always wants to replace missing fonts. I am sure I could do this with X3, but not X5.
I just want to import as curves and not substitute fonts.
When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
I use CorelDRAW X4 exclusively (90%) for Laser work. I have a Page saved as Laser Page. It use to open with a 24 x 12 page area and Horizontal and vertical guidelines in place. It is set to "show guidelines."
However, every time I open a new document, the page layout and guidelines are not there. I always have to rebuild the page and add the guidelines. What has changed so that all I get is a blank page anymore? Or how to reestablish my defaults? I have re-saved it as my new default countless times but nothing sticks. It's a pain to have to always reestablish the layout I want to work with..
I have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
We have an issue happening on many of the documents that we have that include a transparency or gradient. We did not have these issues in Draw12. (but did have printing issues)
1st issue: Opening these gradients will randomly flip them. Like so:
The bottom image is correct. Now when we print them from Corel Draw X5 to either of our printers (Bizhub C250, or Biizhub C360ps) we get the following (this is created from the same master file, same settings):
Notice the lens effect color replacement is gone, and the bottom gradient is barely visible, the top one not working at all.
Same document, saved to 12 and printed the same way:
Both sent with identical printers settings, same print driver, and as close as possible settings in the X5 and Draw 12 dialog print boxes.
How to add my all regular usage documents as a templates. I tried in different ways to display my files in preview dialog box, but no use, only one file is appeared always that is only when the file exist in the desktop. How to display all of my fav. documents in the template preview when new from template command is used .
I"ve just recently upgraded to CDGraphics Suite X5 (from 12), along with Windows 7 and M.Office 2010. When trying to export jpg's I've got 2 problems:
a) Jpg files that I"m now exporting seem to have so many more "options" for exporting and are automatically exporting colours as CMYK. Some of the software programs that I use (for programming digital signage) require jpg files in RGB. Is there a way to set this as a default instead of having to change this everytime I export? (note that I have "checked" the embed colour profile option for my US Web Coated Pantones).
b) The default for exporting is also set at "custom" - should I always be changing this to either medium or large, or can I just leave it at custom. Often I am just emailing jpg's for approval purposes, so I don't always need large file sizes. Does custom set it to the largest possible file size?
I found a tab at the top of the export window that says "Load Presets" and lists for example "low quality jpg.xml" what is this for?
c) when I look at my jpg files in my documents folders they appear "locked" with a little lock on them. Old jpg files created in CD12 don't have this little "lock" icon on them. I have checked the properties and see that these files give full access for modification etc, so I can't figure out why they may be locked.
When I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
Using Graphics Suite X5. Windows 7 Spraying images was no problem until I attempted to add my own images. Now when I click on sprayer, the program stops. I get an error message saying some other program is shutting it down.
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I have a lot of pdfs that are A6 format, and need to keep them this size. When I open the document in Coreldraw they open as A4 page (looking at the document properties (although it does look like its the A6 size with a lot of white space around it.
How can I get corel to open it to the correct A6 page size?
Upgrading to X6 today due to Windows 7 issues, per IT dept. Right off the bat, all the arrowheads on our lines are gone. We always used third one on the arrowhead drop down, but now we have to select them all and add the arrowhead back in, and then change the other half to point in the right direction.
Bug fix for this or just suck up and change 1K drawings in our library?
I have several Coral Draw-12 files saved in a particular folder. The problem is when i am trying to open a particular file it's fine but, when trying to open a second or third .cdr file (with the first file opened) from the same folder it' s not opening.
i have a problem with CorelDraw X5where the file i open is bigger than A4 and on a custom set page size. and it opens like this.and in signcut it is
i need to edit the file and i dont know why coreldraw X5 is not letting me view the entire file. How i can overcome this or if there are any settings that i may have chanced of hot key shortcuts that i could have pressed by accident. also i have been using draw x5 for about a year put i only use half the program for what i need it for.
I just installed X6 in a new computer ( the old one crashed and burned) I had both X5 & X6 in the old computer. Just installed the X6 in the new one. Several old files created in X5 will not open in X6. When I try to open them - they crash X6. Have taken files to another computer and same happens. These files open OK in X5. I have tried 'resaving them' in X5 to V12 and opening in X6 - Crashes Corel same as before..?
I'm sure this has been answered many times before but I've been unable to locate any old threads. I was under the impression that the old import method had gone by the wayside and the file could be opened directly or imported as a pdf?
When I try to open an X5 template in X6, nothing happens in X6. I don't receive any error messages. It looks like the template is opening, but I just end up with a blank grey (no file opened) slate. I am using the 32-bit build. Everything else seems fine.
I'm trying to open a large file (1.2gig) but corel is having a error reading (dialoge box pop up). I have another file 1.19 gig which takes a few minutes to open but is fine.
I have 2gig ram so just wondering what the limit for file size in x3 file is? The file in question was running sweet yesterday so I didn't realise it was so large.
Is there any way to recover the contents ? I can see it in preview so I don't believe it is corrupt....the back-up has the same issues.
I am looking into using CD X5 for my laser engraver, but I am running into a bit of a issue. I have to open PDFs into corel but when I do I lose all the spacing between each word. The font is not subsituted, there is no issue with opening it, and I can rip the file to the output device. I can edit the text by adding a space, I have double hit the space bar to make one space.
We're having problems opening X5 docuements that contain barcodes on them. When trying to edit the barcode it says "failure to launch server application" and if the barcode is rotated, its stretched to fit the area it was in but its back to the orginal unrotated position.
I have fully licensed X4 version. Last week i was receiving 4 different cdr files (cdr X4), created by other person (lets call him Jack). Files were ok, but there was some grammar mistakes, so I asked Jack to correct them and send files back to me. But! When he did that, I wasn't able to open theese files . My Corel hangs trying to open all of them. And it seems like files are opened and Corel is running, but i can not see anything, even panels...Only gray or white screen is visible.... Today, 12 of April, i received files (created also on version X4) from another person and story repeats. It only happans with some cdr X4 files, other works just fine.
Common thing is that all of them are created on X4 version. I tried several times to reinstall my corel, but it did work. I downloaded trial version of Corel X5 on other PC, there i was able to open them, save for version 14, only then i could open theese files on my pc. But i can not do that all the time. Jack is very active client and trial version is only for a month =). I need to understand is it my Corel problem, or Jacks. But todays events, shows it is my problem. I have a feeling, that it might be some corel updates, which prevent my Legal Corel X4 to open cdr files, created on Pirate Corel X4 version. Can it be true? Conflict between legal and illegal versions... If trully, such updates took place last week
Last week I opened some .eps files into coreldraw 12 without any hitch. But two days later I am unable to open or import any of the eps files. I am unable to find out what is the problem. The files I opened and worked on earlier are now opening as static bmp files or they are just opening as a grey square with adobe illustrator written on it. I tried selected both (eps) and (ps, prn, eps ) from the file type while importing. Also I kept the sort type at default. But still it keeps giving me the invalid file type error.
We have tried this on 5 different machine configurations from XP (SP3) to windows 7 (SP1).
We do magazine outlays and therefore require large files. As soon as we go above certain size ( about 1.7GB), then the file will save. But try and open the file then we get an error. Disassembling the file gives an error on opening hte RIFF file. Try and import then erro is "cannot import empty file".
Quite a few people have given advice on using smaller files, but that is impractical. Our only viable solution at the moment is using files split into 10 to 20 pages each. Importing all the section, then creating the PDF and do not bother to save the complete file. We even went as far as building a test machine with up to 24GB of RAM and all the bells & whistles and only windows barebone + updates, no other 3rd party software except Coreldraw X5.
what the size of file is that Coreldraw X5 can handle? WHere are the limitations and is there a swap file setting?
Every time I double click on a bitmap in Corel Draw, it opens up Photo Paint. How can I disable this option? I never use it and its a waste of my time because it takes too long to load up! I don't know if my mouse has a problem, but sometimes I can just click once on a bitmap and it triggers the photo paint to open.
I have a problem opening Font Navigator in Windows 7.
When I click the exe startup for Font Navigator Windows 7 asks if it's OK for this program to make changes to my computer. I answer yes, the screen flickers and Font Navigator fails to open.
This is a recent problem and I can't trace it to any changes on my PC. I have completely cleared Corel Suite from the computer and reloaded the applications.