CorelDRAW Graphics Suite X5 :: JPG Exported Files Appear Locked In Documents Folders
May 30, 2011
I"ve just recently upgraded to CDGraphics Suite X5 (from 12), along with Windows 7 and M.Office 2010. When trying to export jpg's I've got 2 problems:
a) Jpg files that I"m now exporting seem to have so many more "options" for exporting and are automatically exporting colours as CMYK. Some of the software programs that I use (for programming digital signage) require jpg files in RGB. Is there a way to set this as a default instead of having to change this everytime I export? (note that I have "checked" the embed colour profile option for my US Web Coated Pantones).
b) The default for exporting is also set at "custom" - should I always be changing this to either medium or large, or can I just leave it at custom. Often I am just emailing jpg's for approval purposes, so I don't always need large file sizes. Does custom set it to the largest possible file size?
I found a tab at the top of the export window that says "Load Presets" and lists for example "low quality jpg.xml" what is this for?
c) when I look at my jpg files in my documents folders they appear "locked" with a little lock on them. Old jpg files created in CD12 don't have this little "lock" icon on them. I have checked the properties and see that these files give full access for modification etc, so I can't figure out why they may be locked.
View 3 Replies
ADVERTISEMENT
Jun 30, 2011
I am having a difficult time getting my eps files that I have created in X5 to separate once I export them to Indesign CS4 . . . when I try to separate the file on all my postscript 2 & 3 printers machines I don't get any separations . . instead I receive a page with ERROR: dictstackoverflow OFFENDING COMMAND: begin . . I am using spot colours. . .I can import the eps file into Corel 11 and Illustrator CS4 and they work fine once I reexport them . . I can export out of X5 as a pdf and it works fine . . . I do have Ghostscript installed .
View 14 Replies
View Related
Aug 4, 2011
I am trying to export a file for my printer and my CMYK colors are not looking right on the exported file, they are very dull and the colors are not the same at all.
I have changed my DRAW files to be ONLY CMYK colors and have experimented with the Color Management tool to no use at all and reset the workspace.
For example: the blues that my client chose are C56 M0 Y6 K0 and C30 M0 Y60 K0 - they look great onscreen, but once I export to a jpg/eps/tif/etc the colors dull down and don't match at all!
View 14 Replies
View Related
May 19, 2011
When trying to open a coreldraw document sent to me containing fonts that I do not have, I cannot seem to open only as curves and it always wants to replace missing fonts. I am sure I could do this with X3, but not X5.
I just want to import as curves and not substitute fonts.
View 3 Replies
View Related
Jan 31, 2013
When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
Version 16.2.0.998 on 64bit, Win 7.
View 3 Replies
View Related
Oct 11, 2013
I use CorelDRAW X4 exclusively (90%) for Laser work. I have a Page saved as Laser Page. It use to open with a 24 x 12 page area and Horizontal and vertical guidelines in place. It is set to "show guidelines."
However, every time I open a new document, the page layout and guidelines are not there. I always have to rebuild the page and add the guidelines. What has changed so that all I get is a blank page anymore? Or how to reestablish my defaults? I have re-saved it as my new default countless times but nothing sticks. It's a pain to have to always reestablish the layout I want to work with..
View 14 Replies
View Related
May 8, 2010
I have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Printing with: HP inkjet 110 A0Riso RZ370, RZ590 A3Epson inkjet 1400 A3Canon laser LBP5200 A4HP laser 1010 A4
View 10 Replies
View Related
Jan 26, 2012
We have an issue happening on many of the documents that we have that include a transparency or gradient. We did not have these issues in Draw12. (but did have printing issues)
1st issue: Opening these gradients will randomly flip them. Like so:
The bottom image is correct. Now when we print them from Corel Draw X5 to either of our printers (Bizhub C250, or Biizhub C360ps) we get the following (this is created from the same master file, same settings):
Notice the lens effect color replacement is gone, and the bottom gradient is barely visible, the top one not working at all.
Same document, saved to 12 and printed the same way:
Both sent with identical printers settings, same print driver, and as close as possible settings in the X5 and Draw 12 dialog print boxes.
View 14 Replies
View Related
Sep 16, 2013
I noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 8 Replies
View Related
Jun 25, 2012
I am having a strange problem when exporting jpg images. I export the image and I can open it with PhotoPaint, but if I try to import it to Dreamweaver or send it in an email, the file is attached, but the image cannot be seen. I get the square with the red X instead.
View 8 Replies
View Related
Jul 5, 2011
How to add my all regular usage documents as a templates. I tried in different ways to display my files in preview dialog box, but no use, only one file is appeared always that is only when the file exist in the desktop. How to display all of my fav. documents in the template preview when new from template command is used .
View 9 Replies
View Related
Dec 20, 2011
If you noticed that the colour palatte colours in CorelDraw X5 are different to those in Version 10. It is more brighter and also come out much brighter when converted to PNG files.
When I zoomed in the PNG files in Version 10 I can see the small grey dotted on the image colours.
But these dotted not appeared on the PNG files in CorelX5. Is that the reason of different colours bright in X5?
What should I do to maintain the same colours bright of Version10 in X5? This is very compulsory as the PNG files version 10 has been use in the database for many years and I have to maintain the same PNG output after upgraded into X5..
View 4 Replies
View Related
Aug 10, 2012
ive encountered a problem in X3 when i try to export any artwork or photos to my desktop as jpegs they images are all blurry,outside lines are not sharp at all,ive not altered any settings whatsoever and also found that full A4 images will not save at all,just as a solid black line.
View 2 Replies
View Related
Aug 19, 2013
I am trying to export my Corel Draw project to a PDF. Everything works as expected except all Curves with lens are not showing up at all in the exported PDF.
I have tried opening the PDF with several different programs with the same result. I have also tried changing the PDF export settings but haven't had any luck.
View 15 Replies
View Related
Oct 18, 2012
when i click the fonts list documents fonts not showing in corel 12
View 8 Replies
View Related
Oct 17, 2011
Many of my fonts become pixelated when I export them as jpeg. I use 72dpi, default settings. How can I correct that? My photos stay clean though.
View 2 Replies
View Related
Aug 22, 2013
Example01.jpg
I have used Coreldraw X5 using braille text. When I opened the files using Coreldraw X6 and exported to .SVG output. The text appears to be showing improper alignment.I want the text to be intact and letters should not break.
View 12 Replies
View Related
May 10, 2012
I have recently upgraded to X6 from X3. After design work I would export the file to jpeg for client approval. I used Apple Mail 5.2 to attach the jpeg file but my problem is the client cannot open the file. It just turns out blank with a little cross. I cannot figure out what is the problem during the export process. I have no problem at all with X3.
View 9 Replies
View Related
Nov 10, 2013
What are the folders of my current CorelDRAW installation i can back-up and use them to replace the folders of a new installation so to retain all my settings (workspaces, customizations, shortcuts, settings, plugins, etc)
I need to uninstall and re-install my current installation
View 4 Replies
View Related
Feb 10, 2013
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
View 10 Replies
View Related
Aug 21, 2013
Since My Documents is where I put all my *useful* files/folders, I like to keep it clean and organized. I don't want it cluttered up with folders that programs are using to store "work" files, as is the case with PSP. I went to preferences and laboriously changed ALL File Locations to the user/my-name/appdata/...etc. area. But when I saved, exited and reloaded PSP, those folders were created again. Checking the File Locations in preferences again showed that the appdata ones I had put in were still the top (primary) folder option, but the ones directing the files to "documents" had been created again as the third entry in each category.
How can I keep these folders/files OUT of My Documents?
View 8 Replies
View Related
Aug 18, 2011
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
View 14 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Jun 9, 2011
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies
View Related
Oct 28, 2013
Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies
View Related
Oct 17, 2012
After this error when I click cancel to delete the files and start again shows the same error deleting the remaining files.
View 6 Replies
View Related
Oct 11, 2013
my CorelDraw files are always at least 1345 kb when I have at least one vector graphic in the file. The pdf I export from it is also that big. I made a file with just one square and it's already 1345 kb.
I just started a new cdr file and created a square, nothing else.
View 4 Replies
View Related
Jan 9, 2013
How to open, import, convert or use old files from Corel 4?
View 15 Replies
View Related
Jun 30, 2011
I need to merge several Corel Draw files into one Corel file but have no clue how to do this.
View 1 Replies
View Related
May 22, 2012
The best way to export Corel Draw files to a format that other non-Corel users can easily manipulate? I have had trouble saving as or exporting to other vector formats in the past. I use very large files with imported jpg graphics, etc.
Also, do any of the effects/actions (drop shadows, power clipping, grouping) that we use in Corel affect the ability of other users to at least open and manipulate the file? Even if it's not exactly the same in the converted file, what is the most convenient way to allow another artist to view & manipulate Ai or EPS exported from Corel Draw? (Specifically X6 if that applies)
View 2 Replies
View Related
Nov 13, 2012
Since upgrading to X6 Windows will not recognise CorelDRAW as being compatible with EPS files, what I mean is when going to "Open With" CorelDRAW is not listed, and even when I browse for it, select the program file it still won't recognise it.
I've raised a support case which advised me to associate EPS in teh Tools->options->global which I have done but it makes no difference.
View 2 Replies
View Related
