Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 RepliesI tried to open file's that I created recently in X3 and they will not open. when i try to open them they appears as blank page and they show nothing
all of my Cdr files be corrupted . they show their real size (eg 23mb ) but when i open them it show white page. Even the tumbnail pic shows only corel draw pencil and when i want open them on corel or import in it This error message appears : D: 01.cdr" is not importable using the selected filter, or this format is not supported
I recently have installed Corel Draw x5 and everything was working perfectly fine when all of a sudden it stopped opening .cgm files. It will pop up the message of Corel Draw has stopped working and then I click OK and it closes the program. Every other file extension I have tried opens prefectly fine.
Here are a couple of things that I've done so far:
1. Reverted back to a Default Workspace.
2. Closed out all Dockers.
3. Reinstalled entire program and all features. Updated all patches and Clean booted the PC with only MS Services running. (As instructed by Corel Support)
When I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
I have recently switched from a PC to Mac and reloaded my CorelDraw 11 software onto my Mac. I have been importing tiffs into my document but am unable to use any of effects tools. What I can do to get this software working on my laptop. I am running OSX Leopard.
View 4 Replies View RelatedTemp. Drive Full, File Copy Error?I got this error in CDR XIII. I have checked my Temp Drive Folder in C: I have sufficient space in hard drive but this error occuring again & again & I could not save my hard working graphic files.
View 9 Replies View RelatedFont Navigator stopped working correctly. Not showing any fonts. When will be update for this software?
View 4 Replies View RelatedAfter this error when I click cancel to delete the files and start again shows the same error deleting the remaining files.
View 6 Replies View RelatedI'm using Coral Draw Graphics suite X5 built 15.2.0.686 SP4 (all available updates installed) This is a bug I have detected.
Start a new CorelDrawFile and import a .jpg,after putting e.q. some arrows on it I choose "export" and exports a .tif - file to a folder.
For further manipulations I also save the .cdr - file to another Folder. Insofar everything works well.But if I reopen the .cdr-file and do my manipulations at my picture and then I try to export the .tif - file to the folder, where the before exported .tif is situated, corel well notice that the old file exists and asks for replacement,BUT instead of exporting the .tif - file the .cdr file will be saved. Got this failure reproducible by doing it the same way.
not till I exported a other file type .jpg or any other and switches back to .tif, exporting the .tif file works and the old .tif - file will be replaced by the new one.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
my CorelDraw files are always at least 1345 kb when I have at least one vector graphic in the file. The pdf I export from it is also that big. I made a file with just one square and it's already 1345 kb.
I just started a new cdr file and created a square, nothing else.
How to open, import, convert or use old files from Corel 4?
View 15 Replies View RelatedClient supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View Related02012013010.jpg
Blank Blocks behind text and graphics
I need to merge several Corel Draw files into one Corel file but have no clue how to do this.
View 1 Replies View RelatedThe best way to export Corel Draw files to a format that other non-Corel users can easily manipulate? I have had trouble saving as or exporting to other vector formats in the past. I use very large files with imported jpg graphics, etc.
Also, do any of the effects/actions (drop shadows, power clipping, grouping) that we use in Corel affect the ability of other users to at least open and manipulate the file? Even if it's not exactly the same in the converted file, what is the most convenient way to allow another artist to view & manipulate Ai or EPS exported from Corel Draw? (Specifically X6 if that applies)
Since upgrading to X6 Windows will not recognise CorelDRAW as being compatible with EPS files, what I mean is when going to "Open With" CorelDRAW is not listed, and even when I browse for it, select the program file it still won't recognise it.
I've raised a support case which advised me to associate EPS in teh Tools->options->global which I have done but it makes no difference.
I'm using CorelDraw X5 with Windows 7. When I go to save a file often it won't save unless I repeat the save file command several times. Once I do get it saved the file then shows to be locked.
View 2 Replies View RelatedI have encountered an error when I imported a prn file to coreldraw x4 in win7.
after i choose that the file be imported as curve this error is showing :
Error: definefont
OFFENDING COMMAND: defineresource
STACK:
/TT15ET00
/TT15ET00
-dictionary-
The file extension .sbj was used by Micrografix products, and Micrografix has since become a part of the Corel Corporation. I have thousands of these files. How can I use them in CorelDraw X5?
View 1 Replies View Relatedfile type: channeled .eps file created in photoshop (my 'goto' for screenprinting seps)
system: windows 7, coreldraw x6
problem: once imported into CorelDraw, in the print dialog the pre flight will analyze the document and it takes forever; if it does not crash, once completed every other function takes forever to edit (Ex: to deselect a spot color will take 15-20 seconds to implement)- then when printing, errors occur.
1) previous versions of Coreldraw does not have this problem
2) this happens with all printers, even pdf print driver.
3) workaround that works: save the channeled eps file as a Photoshop file.
I have a new Corel product...Graphics Suite X4 Home version operating on Windows 7. I have designed several flyers and attempted to save as a PDF file to send to an associate. However the PDF option is not available in the selection box.
So I attempted to download Service Pack 2 for Suite X4 but the installation fails on three attempts.
Upgrading to X6 today due to Windows 7 issues, per IT dept. Right off the bat, all the arrowheads on our lines are gone. We always used third one on the arrowhead drop down, but now we have to select them all and add the arrowhead back in, and then change the other half to point in the right direction.
Bug fix for this or just suck up and change 1K drawings in our library?
I have a Student and Home version of X6, and for the life of me I cannot import an existing DXF file. Is there a way to do this or am I out of luck.
View 1 Replies View RelatedI have looked at the galleries and saw some excellent pictures. Since then I no longer can open any file . I uninstalled Coreldraw 15 and even went to repair mode, still no luck. (I reinstalled and removed many times).
I reinstalled Coreldraw 14 and any file I work on and save and close I cannot open the file.
It seems I have picked up a virus from the pictures I uploaded from Corel gallery.
I am having an issue saving file changes. I can create a file and save it, but if I make a change and try to save it again I get an error that says that the file is open elsewhere.
View 3 Replies View RelatedI occasionally have customers bring in .ai file for me to open in x4. I am unable to do so. I have read about opening in Adobe reader and exporting as PDF. I have no other software to open this. I have tried importing selecting files of type .ai .
View 3 Replies View RelatedI have several Kodak Photos CD - some of the Corel Professional Photos, but X6 seems to have dropped the PCD filter.
View 3 Replies View RelatedI have Corel Draw x5; our store computer has x4 installed on it. We're having trouble opening files in x4 that were created in x5.
View 12 Replies View RelatedI have tried on numerous occasions to save my corel draw files to adobe illustrator but once you try to save a page in corel to AI the program locks up in the background so that you can't close it and when I try to enter my new AI file into my internet "dropbox" so that my web-designer can use the files, I am just informed that copying the file into dropbox is not possible as the file is currently open in Corel Draw?
I have tried to get the hot-fix/updated patch for Corel X6 however that is an even worse nightmare with all the swings and roundabouts Corel trys to get you to go on before you can get a simple update.
My web designer is waiting to start work on my new website but I just can not get my design work to him.
I just installed X6 in a new computer ( the old one crashed and burned) I had both X5 & X6 in the old computer. Just installed the X6 in the new one. Several old files created in X5 will not open in X6. When I try to open them - they crash X6. Have taken files to another computer and same happens. These files open OK in X5. I have tried 'resaving them' in X5 to V12 and opening in X6 - Crashes Corel same as before..?
View 5 Replies View Related