CorelDRAW Graphics Suite X5 :: PhotoPaint Has Stopped Working
Jul 31, 2012
When I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
View 13 Replies
ADVERTISEMENT
Jun 19, 2013
Font Navigator stopped working correctly. Not showing any fonts. When will be update for this software?
View 4 Replies
View Related
Apr 17, 2013
My tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies
View Related
Jul 6, 2013
I am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
View 2 Replies
View Related
Jun 23, 2011
Working in photopaint . . . all goes well until I try to save or close the file. Then it stops responding. When I try to close CorelDraw, it says that I cannot close it while I have the photo open in Photopaint. However, Photopaint is no longer running. This is new problem since I installed Patch 3.
View 2 Replies
View Related
May 18, 2012
When selecting "File - Acquire Image" in Corel PhotoPaint X6 it does not see my scanner, yet when I open Corel PhotoPaint X5 the scanner is there and I can scan directly from there.
The scanner also works fine in Adobe Acrobat and other software installed on my computer. Only Corel PhotoPaint X6 is not working
View 4 Replies
View Related
Jan 1, 2013
PhotoPAINT doesn't cycle through the images of an animation right after creating a new one.
Here are the steps to reproduce:
Create a new image and select, say, 5 frames for the image. Add some imagery to each of the frames (and don't forget to flatten the object hierarchy as PhotoPAINT doesn't deal with graphic objects for animated images.) Open the Film tool window and hit the [Play] button. Result: The image does not get animated.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 4 Replies
View Related
May 4, 2011
I've been using these two programs for some time with no problem. I recently upgraded some of my adobe software and now when I try to open CorelDRAW of Photopaint, there is no welcome screen anymore and I can't click on anything.
Is there something conflicting with the welcome screen (flash or something that the welcome screen uses) that perhaps was installed with one of the adobe products, maybe? Not sure if it matters but I updated adobe dreamweaver and fireworks.Both programs are unusable now with this loading problem.
View 14 Replies
View Related
Apr 16, 2009
I have had CorelDraw & Photopaint X4 installed for several months and just started having this problem.
CorelDraw: Every time I use the Fill Color option, whether by double-clicking the bucket icon at the bottom OR using the option in the toolbar, the program freezes and never recovers. When I use the color palette to fill a shape, I do not encounter the problem.
PhotoPaint: Every time I use the Image ->Paper Size option, the program freezes and never recovers.
I have reinstalled the program and the problem persists.
These are options I use often, and if I don't find the solution I will have to find an alternative to Corel.
View 5 Replies
View Related
Mar 24, 2012
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
View 1 Replies
View Related
Jan 18, 2013
After using Camera Raw Lab for .NEF files, photopaint seems to be incapable of exporting the file to a jpg file without extra fiddling.
I can export after I convert the file to RGB mode, but I want to understand why I cannot export as a jpg without doing that...?
View 11 Replies
View Related
Mar 4, 2012
Is it possible that I can open a bitmap present in a coreldraw file in photoshop, edit it there and it gets back to its original position. that is the thing for which corel photo paint gets opened, i can set Adobe Photoshop for editing images?
View 14 Replies
View Related
Dec 20, 2011
I seem to have lost the functionallity of double-clicking on an image placed in CDR X5 to automatically edit in Photopaint. The checkbox in tools/options/edit is checked and photopaint can certainly be opened in the Application Launcher but double-click does nothing.
View 5 Replies
View Related
Oct 11, 2011
how to export the text as an editable to photoshop or to photopaint as exactly as in the coreldraw ? It should be editable after exporting them
View 1 Replies
View Related
Oct 28, 2013
Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies
View Related
Sep 16, 2013
I noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 8 Replies
View Related
Jan 21, 2012
Using Graphics Suite X5. Windows 7 Spraying images was no problem until I attempted to add my own images. Now when I click on sprayer, the program stops. I get an error message saying some other program is shutting it down.
View 1 Replies
View Related
Mar 24, 2012
macros are all disabled and i remembered there is a command to disable all the events but i could not figure out where exactly it is located and even i tried to reinstall the using modiy and repair twice times to install the software but still persists to activate the macros.
all the macros are grayed out and even Alt F11 also not working.
View 2 Replies
View Related
Jun 18, 2013
I have set the automatic backups to end up in a specific folder on an external hard drive, which is always on. However, none of the auto backups end up there. They end up in the same folder as the actual file on my regular HD - which absolutely defies the purpose of having a backup on a different medium. I wish I could attach a screenshot of the setting page to prove my point, but Corel has not advanced to that level yet as it seems. Not even in "Support", which, unless you own the latest version of a Corel software, is non-existing anyway.
View 3 Replies
View Related
Jan 18, 2013
Every time I go into Corel Photo-Paint x5 and try to use Cutout lab, there's no pop up window with the lab, the program stops working until I hit escape. I have a lot of cutouts to do.
View 3 Replies
View Related
Mar 20, 2012
I'm assuming eye candy is not working in x6 because x6 is now true 64 bit.
how to install the 64bit eye candy so it works in Corel PP x6?
Win 7, 64 bit, 16G Ram
View 14 Replies
View Related
Dec 17, 2012
A graphic exported in Draw & PP in X4 as a .png works fine.
The same graphic copied & pasted into Draw or PP in X6 does not.Repeatable 100%...The eyedriopper selection of the transp[arent color seems to pick up the right color, but the output presents like a .jpg. Viewed in IE9, Firefox & Chrome with same results.
View 11 Replies
View Related
Dec 16, 2012
The scanner shortcut doesn't work unless you go to acquire first. It keeps working until you close CorelDraw. When you reopen Corel, you must then go to acquire first.
View 2 Replies
View Related
May 4, 2008
The brush tool is no longer working - when I select on any of the brush tools, spray, Art burhs, spray , line, marker etc, they will not work. When I select the drop down nothing is listed. Additionally, none of the other tools in the box, Effect Tool, Image Sprayer too ect, do not work as well. Did I select something to turn off the tool?
I've tried to uninstall and re-install and that did not work.
View 10 Replies
View Related
Aug 20, 2011
When I try to draw an ellipse (or circle) and drag it on to my sheet, nothing happens. All of my other shape tools work as they should. What has happened. It worked originally.
View 4 Replies
View Related
Apr 20, 2012
I have uninstalled and reinstalled my x5 and while it fixed the error causing my default text cursor to start at 270 degrees for some reason instead of 0, I still cannot edit ANY font text as far as the kerning goes. When i drag it, it snaps right back everytime. This is extremely frustrating when aligning text to a curved path and all the letters are squished together.wth? This just happened in the last week randomly.
View 1 Replies
View Related
Jul 27, 2011
For years I have used the clone tool happily which has been great for touching up photo's on Photo-paint 12
A few days ago - imported a jpg into Paint as usual, went to use the clone tool and it just doesn't work any more. I can select the icon and the little circles come up but it just doesn't 'clone' anything. Its as if there is mysterious setting that has been turned on that just makes nothing happen.
I have reinstalled the software: no luck - still the same.
View 5 Replies
View Related
Mar 22, 2012
I am working with some very large images in X5, ~ 2500 mm x 1200 mm at up to 600 DPI sometimes. (And before you say it, yes, I do need this. It is a very specific application that we work on daily and I do need the ability to basically control every single pixel at that size & that resolution). I'm using WinXP 32-bit (company mandate).
When I need precisely sized objects, I am using CorelDRAW and occasionally when I need pixel perfect placement, PhotoPaint gets the call. The images may go through both before it runs through a final backend processor (some specialized software) and then going to print.
The problem is that I am running into limits when I go beyond 300 DPI (depending on the image dimensions). For example, CorelDRAW often will fail to export a TIFF correctly when I try a 450 DPI image at that size (some TIF file comes up but nothing can load it, it's corrupted). Or for even smaller images, if I enable transparent background, I also get a similar problem. Sometimes, e.g. Photo Paint, just chokes up with out of memory problem and fails to load images at all.
Thing is, we actually have Photoshop CS5 available and while there are many things I don't like about it, it actually can handle stuff of this size. So there is also a push to get Illustrator as well under the same assumption that it will work. However, Adobe stuff is way more expensive, feels more bloated and slower and (for me at least) a pain to use compared to Corel, so I'd rather not.
Would moving to 64-bit WinXP work? Or would I need to go to CorelDRAW X6? This is already a quad-core machine with 4GB of RAM.
View 2 Replies
View Related
Nov 5, 2013
I upgraded my Corel Draw to X6 version about 3 months ago. It worked perfect until a few days ago, since in started to freeze when doing simple operations as copying a vector image or a text or exporting a document (for example a vector image to .png or .pdf)
The funny part is that we have two computers in our office with Corel installed, and both of them have the same problem. We checked with our IT department, did all the upgrades to Corel and Windows, did a repair to Corel, and still, same problem.
View 7 Replies
View Related
Nov 11, 2013
We purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
Windows XP are 32 bit, Windows 8 is 64 bit
View 5 Replies
View Related
Dec 20, 2012
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies
View Related
