When selecting "File - Acquire Image" in Corel PhotoPaint X6 it does not see my scanner, yet when I open Corel PhotoPaint X5 the scanner is there and I can scan directly from there.
The scanner also works fine in Adobe Acrobat and other software installed on my computer. Only Corel PhotoPaint X6 is not working
My tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies View RelatedWhen I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
I am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
Working in photopaint . . . all goes well until I try to save or close the file. Then it stops responding. When I try to close CorelDraw, it says that I cannot close it while I have the photo open in Photopaint. However, Photopaint is no longer running. This is new problem since I installed Patch 3.
View 2 Replies View RelatedPhotoPAINT doesn't cycle through the images of an animation right after creating a new one.
Here are the steps to reproduce:
Create a new image and select, say, 5 frames for the image. Add some imagery to each of the frames (and don't forget to flatten the object hierarchy as PhotoPAINT doesn't deal with graphic objects for animated images.) Open the Film tool window and hit the [Play] button. Result: The image does not get animated.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I've been using these two programs for some time with no problem. I recently upgraded some of my adobe software and now when I try to open CorelDRAW of Photopaint, there is no welcome screen anymore and I can't click on anything.
Is there something conflicting with the welcome screen (flash or something that the welcome screen uses) that perhaps was installed with one of the adobe products, maybe? Not sure if it matters but I updated adobe dreamweaver and fireworks.Both programs are unusable now with this loading problem.
I have had CorelDraw & Photopaint X4 installed for several months and just started having this problem.
CorelDraw: Every time I use the Fill Color option, whether by double-clicking the bucket icon at the bottom OR using the option in the toolbar, the program freezes and never recovers. When I use the color palette to fill a shape, I do not encounter the problem.
PhotoPaint: Every time I use the Image ->Paper Size option, the program freezes and never recovers.
I have reinstalled the program and the problem persists.
These are options I use often, and if I don't find the solution I will have to find an alternative to Corel.
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
After using Camera Raw Lab for .NEF files, photopaint seems to be incapable of exporting the file to a jpg file without extra fiddling.
I can export after I convert the file to RGB mode, but I want to understand why I cannot export as a jpg without doing that...?
Is it possible that I can open a bitmap present in a coreldraw file in photoshop, edit it there and it gets back to its original position. that is the thing for which corel photo paint gets opened, i can set Adobe Photoshop for editing images?
View 14 Replies View RelatedI seem to have lost the functionallity of double-clicking on an image placed in CDR X5 to automatically edit in Photopaint. The checkbox in tools/options/edit is checked and photopaint can certainly be opened in the Application Launcher but double-click does nothing.
View 5 Replies View Relatedhow to export the text as an editable to photoshop or to photopaint as exactly as in the coreldraw ? It should be editable after exporting them
View 1 Replies View RelatedThe scanner shortcut doesn't work unless you go to acquire first. It keeps working until you close CorelDraw. When you reopen Corel, you must then go to acquire first.
View 2 Replies View RelatedCan not get X6 to recognize my scanner under acquire. It is a Muzteck USB3 2400 Pro.
View 5 Replies View RelatedPhotoPaint: Cannot select multiple files for batch mode
View 5 Replies View RelatedCannot "acquire image" from either my scanner nor camera as the choices are grayed out in Corel DrawX5.
HOWEVER I can acquire them in PhotoPaintX5.
Is this a "glitch" or a built in inconvenience?
How can I add shutterstock to correl connect like the Flickt, fotolia, iStockphoto?
View 2 Replies View RelatedCorel Capture X6 wont work, i got message then i decide to choose user define but there is no option except shift+ F7 "Dream and never stop dreaming, cause dreams always available for free".
View 11 Replies View RelatedI posted this topic about Corel x4 and got some answers. Unfortunately it didnt work because my corel was corrupt. But now I installed my old Corel 12 and tried to follow the instructions the same way as they told me to do it in Corel x4, but the options are different.
So..... how do i make the settings so that when i double click on an image in corel 12, it will take me directly to Corel Photo for editing.
how to send graphic in vector from coreldraw x86 to photopaint x86 directly via application launcher
( change it in eg. eye candy ), then send back in bitmaps just by closing PP.
eye candy x86 issue ( i coppied this: libmmd.dll to system32 and C:Program Files (x86)Alien SkinEye Candy 7
too ( dll file is from here, not sure if its for x86 [URL]
I have a major problem with PhotoPaint X5 after SP2. I have an image of a movie poster from internet. Let's say about 1000x1500 pixels. I make the width 300 px. (height will be 440 or more) Than I make a new document of 300x430 pixels. Copy and paste the first file into the second. Move it up and/or down with the arrow keys to have a good composition. Than I combine the image with the background (shift/control/arrow down) and save it to rest.jpg. When I want to close the original image in CorelPaint I get the Corel A.R.M. window. I tried a few times without combining the image to the background and than I CAN close the file without crashing PP. I'm glad I found a workaround since I do these actions quit a lot for my movie and music database. But it took a lot a time to figure out where it went wrong. So according to my tests it must have something to do with combining the image to the background. Sometime when nudging the image a couple of times up and down crashses PP too when I then combine the image and background. At that point i don't come a far as exporting.
View 9 Replies View RelatedYesterday when I was working with Corel Photo Paint X6 and Corel Draw X5 all of a sudden all my desktop program icons changed to show Corel Draw X6 -- also an .ink extension appeared behind all the program names. (this also happened in my "all programs" list.) Everything I click on takes me to Corel Draw X6. get things back to normal?
View 3 Replies View RelatedI am just learning photoshop after years of using Corel Photopaint. Over the years I tried Adobe but just got turned off because I thought it was non-intuitive, but now I'm on a new mac with CS2 I understand I have to just get used to it so i can have its powerful features! After days of searching, I have yet to find the answer to my biggest question...
How do you customize the toolbars?? I know how to move the windows, dock them, make them visible/invisible, etc. But how can you add new buttons to them? I'm used to having every function that I use often right there, one mouse-click away, instead of nested inside of some menu. Like a save button for instance. Or copy and paste.
Does anyone know if Photoshop CS3 will import a Photopaint .cpt file. We are thinking of switching from Photopaint to Photoshop & have a large number of files that we would still need to have access to. There are way too many of them for us to open each one in Photopaint and then export as a psd.
View 7 Replies View RelatedWe need to draw/modify some CGM graphics for a customer. These CGM should include the attributes "apsid" and "apsname" for a "grobject", according to the AECMA (ASD) Specification S1000D Issue 1.9.
How can I set these attributes in Corel DESIGNER X5? I found a predefined element named "Name", but no element named "Id" under object data. Further, I found out, that when I change the name of a object through the object manager the element "Name" changes also.
We should deliver the CGM graphics as CGM GREX 2.6, so these two attributes have to be correct.
I've got this huge project - a printed catalog - that involves hundreds of product photos, of which the originals are scattered all over the place in different directories, etc. Nobody knows where a photo might be hiding. However, luckily, this is an update of an earlier catalog of the same type, so most of the photos are already there. Unfortunately, many of them need to be "photoshopped" in some way, adding pigtail connectors in place of terminal blocks etc., which is fine.
But, when I try to use the edit bitmap function in DRAW, the photo always opens in a new copy of PhotoPaint, forcing me to then save it separately, adding a name instead of "Bitmap in..." which would be all the 100 or so photos that I will have to work on. I don't have any need to have the bitmap saved separately except that I need to have the various photos that I'm disecting in the same copy of PhotoPaint, so that means I have to jump though all these hoops.
Q: Is there a way to force the Edit Bitmap to open everything in the same copy of PhotoPaint? So that I can simply cut and paste pieces, etc.
I have several book cover designs that I've been working on in CorelDraw saved as CDRs, but now when I go to open them, they open as CDRs in Corel Photo Paint, I don't understand why? I've tried the Open from File Menu and then Save As CDR , but it doesn't work either. Is it possible I clicked on something I shouldn't have? Also, I need to separate the background from one of the designs in bitmap, the image is as if its all grouped together and won't ungroup or let me edit it, I did not save in layers or masks (any other way I can still try and edit it?
View 5 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Related