Is it possible that I can open a bitmap present in a coreldraw file in photoshop, edit it there and it gets back to its original position. that is the thing for which corel photo paint gets opened, i can set Adobe Photoshop for editing images?
View 14 RepliesMy tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies View Relatedhow to export the text as an editable to photoshop or to photopaint as exactly as in the coreldraw ? It should be editable after exporting them
View 1 Replies View RelatedWhen I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
I am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
Working in photopaint . . . all goes well until I try to save or close the file. Then it stops responding. When I try to close CorelDraw, it says that I cannot close it while I have the photo open in Photopaint. However, Photopaint is no longer running. This is new problem since I installed Patch 3.
View 2 Replies View RelatedWhen selecting "File - Acquire Image" in Corel PhotoPaint X6 it does not see my scanner, yet when I open Corel PhotoPaint X5 the scanner is there and I can scan directly from there.
The scanner also works fine in Adobe Acrobat and other software installed on my computer. Only Corel PhotoPaint X6 is not working
PhotoPAINT doesn't cycle through the images of an animation right after creating a new one.
Here are the steps to reproduce:
Create a new image and select, say, 5 frames for the image. Add some imagery to each of the frames (and don't forget to flatten the object hierarchy as PhotoPAINT doesn't deal with graphic objects for animated images.) Open the Film tool window and hit the [Play] button. Result: The image does not get animated.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I've been using these two programs for some time with no problem. I recently upgraded some of my adobe software and now when I try to open CorelDRAW of Photopaint, there is no welcome screen anymore and I can't click on anything.
Is there something conflicting with the welcome screen (flash or something that the welcome screen uses) that perhaps was installed with one of the adobe products, maybe? Not sure if it matters but I updated adobe dreamweaver and fireworks.Both programs are unusable now with this loading problem.
I have had CorelDraw & Photopaint X4 installed for several months and just started having this problem.
CorelDraw: Every time I use the Fill Color option, whether by double-clicking the bucket icon at the bottom OR using the option in the toolbar, the program freezes and never recovers. When I use the color palette to fill a shape, I do not encounter the problem.
PhotoPaint: Every time I use the Image ->Paper Size option, the program freezes and never recovers.
I have reinstalled the program and the problem persists.
These are options I use often, and if I don't find the solution I will have to find an alternative to Corel.
I am currently using this method, creating a 1-bit bitmap from a grayscale "distress" texture bitmap, choosing transparent fill or outline depending on which area i need trasparent and powerclip it in text or other vector object.
Is there a way to achieve the same distress effect with transparency with FILL ? pattern fill maybe? eg can i save in some format this bitmap to use it maybe as a pattern in pattern fill and retain transparency ?
sample file (X4)
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
After using Camera Raw Lab for .NEF files, photopaint seems to be incapable of exporting the file to a jpg file without extra fiddling.
I can export after I convert the file to RGB mode, but I want to understand why I cannot export as a jpg without doing that...?
I seem to have lost the functionallity of double-clicking on an image placed in CDR X5 to automatically edit in Photopaint. The checkbox in tools/options/edit is checked and photopaint can certainly be opened in the Application Launcher but double-click does nothing.
View 5 Replies View RelatedI have been using the macro that allows you to use photoshop as the default bitmap editor, however I've just installed photoshop cs4 (i had been using cs3) when I run though the set up instructions and get to the reference file bit the cs3 object library has vanished and the cs4 wont work, I have tried to browse for the file that would link the cs3 object library but I'm unsure as to what it is called?
the reference box will only partially show me some of the directory path name which I presume is similar for cs3.
is there any way to make "edit bitmap" in corel-draw to work with photoshop instead corel-photopaint?
View 2 Replies View RelatedEvery time I try to generate a bitmap with 300 dpi in x6, he disappears
View 14 Replies View RelatedWe have just purchased X6 and are having difficulty editing a bitmap. Its unable to be selected.
After reading your posts here we have tried the following which we find quite annoying for a new program.
Surely this is something simple we have missed. All we have done is installed the X6 and run the program , clicked on a bitmap and nothing ??? This has really left a bad experience especially when we just purchased this program and it cant even edit an image. The customer support was terrible , I had to ring back because the person couldn't hear me about 8 times. It was only a search on the web that led me here.
I got a new MAC OS X 10.6.2 last spring and installed the CorelDraw 11 that I've used for several years on my other MACS. When I try to use a bitmap effect from the drop down menu (like 3D effects, art strokes, creative, contour etc...) the boxes do not open. I've tried reinstalling the application and it didn't work. I was always able to use these effects on my other computers. Every other menu item I use works. I wish Corel would make something new for MACs
View 1 Replies View RelatedMGD 64 lemonade to forum.cdr
This isn't something I am in need of because in the future with this graphic I would just convert the background. Just wondering why it made those odd lines coming off of the words and the black bar (I don't know how the heck you guys can post large things, things with motion, etc. I have to make things miniature to put them on here)
I assume it has something to do with how the original, that came from MillerCoors, has those layers of lines in it. I just don't get why lines would then be visible when I changed it since nothing like that has happened before. Oh, and if you are wondering why I converted it, it's because I knew my rip server wouldn't like all that stuff going on in the original
Contour on a bitmap shape.
I thought this was doable. Today I found it's not, or stopped working.
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it.[URL]
Does exist this macro for X5:
[URL]
I'm trying it but it doesn't work for x5, and my previous version of Coreldraw is 10,
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
When having photos in CorelDraw, I need to edit them so I right click on the photo and select "Edit Bitmap". I am not too familiar with Photo-Paint, and wonder if I could link to another application (ie photoshop) to make my bitmap changes.
View 4 Replies View RelatedWhen working in CDX5, PP is used to edit bitmaps in the file. Is it possible to configure CD to use a different bitmap editor so that I do not have to export edit and re import into CD?
View 1 Replies View RelatedMarshall's Burger Logo (Red Background).pdf
I receive a PDF file from my client which is their logo.
The text is suppose to be vector, but they appear as bitmap and I cannot apply fill and outline to it.
I can edit the nodes with the Shape Tool after I converted it to AI or EPS format, but still cannot apply fill and outline.
If I have a bitmap image that has been cropped to an irregular shape (say a star or pear etc) is there any way in CorelDraw to replace the image without having to crop and position the bitmap all over again. I thought It would be as simple as clicking edit bitmap & pasting the new image once in corel photo paint but that does not seem to be the case.
edit: also is it possible to swap the image with a higher resolution version.
I have recently created a macro in coreldraw x6 but after running this macro When I export through Publish to PDF bitmap in the document deleted in PDF file.
View 5 Replies View RelatedHow do I make a bitmap become transparent using CorelDraw and Corel Photo Paint?
View 1 Replies View Relatedi want to change the color of a bitmap that i hav in the cdr 11.
1st i draw a circle, then fill any color. then i turn that circle to bitmap by click the option "Covert to Bitmap" as RGB with 300dpi. Then i select that image, then i go to " Bitmap - Creative - Scatter". Now the image is show with edges scattered. After all these ladder i want to change the color of that image by right click on mouse from the color palatte. someone says, go back and change the color and do all these ladder. Its very difficult. i had seen this thing when i went to a printing firm near by.
RGB Image.jpg
I'm using X5. I need to recolor the attached image from its current color to CMYK 15, 85, 53, 54. Is there a simple way to do this and retain the light colored styrations throughout the image?